mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Dybcio <konradybcio@kernel.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Bjorn Andersson <andersson@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
	 linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Konrad Dybcio <konrad.dybcio@linaro.org>,
	 Konrad Dybcio <konradybcio@kernel.org>
Subject: [PATCH v2] usb: typec: fsa4480: Check if the chip is really there
Date: Fri, 26 Jul 2024 13:43:30 +0200	[thread overview]
Message-ID: <20240726-topic-fs4480_check-v2-1-901ca449db15@kernel.org> (raw)

From: Konrad Dybcio <konrad.dybcio@linaro.org>

Currently, the driver will happily register the switch/mux devices, and
so long as the i2c master doesn't complain, the user would never know
there's something wrong.

Add a device id check (based on [1]) and return -ENODEV if the read
fails or returns nonsense.

Checking the value on a Qualcomm SM6115P-based Lenovo Tab P11 tablet,
the ID mentioned in the datasheet does indeed show up:
 fsa4480 1-0042: Found FSA4480 v1.1 (Vendor ID = 0)

[1] https://www.onsemi.com/pdf/datasheet/fsa4480-d.pdf

Fixes: 1dc246320c6b ("usb: typec: mux: Add On Semi fsa4480 driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
---
Changes in v2:
- Prepend the new defines with FSA4480_ to make them more obvious
- Link to v1: https://lore.kernel.org/r/20240212-topic-fs4480_check-v1-1-d9969e4d6f9a@linaro.org
---
 drivers/usb/typec/mux/fsa4480.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
index cb7cdf90cb0a..cd235339834b 100644
--- a/drivers/usb/typec/mux/fsa4480.c
+++ b/drivers/usb/typec/mux/fsa4480.c
@@ -13,6 +13,10 @@
 #include <linux/usb/typec_dp.h>
 #include <linux/usb/typec_mux.h>
 
+#define FSA4480_DEVICE_ID	0x00
+ #define FSA4480_DEVICE_ID_VENDOR_ID	GENMASK(7, 6)
+ #define FSA4480_DEVICE_ID_VERSION_ID	GENMASK(5, 3)
+ #define FSA4480_DEVICE_ID_REV_ID	GENMASK(2, 0)
 #define FSA4480_SWITCH_ENABLE	0x04
 #define FSA4480_SWITCH_SELECT	0x05
 #define FSA4480_SWITCH_STATUS1	0x07
@@ -251,6 +255,7 @@ static int fsa4480_probe(struct i2c_client *client)
 	struct typec_switch_desc sw_desc = { };
 	struct typec_mux_desc mux_desc = { };
 	struct fsa4480 *fsa;
+	int val = 0;
 	int ret;
 
 	fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL);
@@ -268,6 +273,15 @@ static int fsa4480_probe(struct i2c_client *client)
 	if (IS_ERR(fsa->regmap))
 		return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n");
 
+	ret = regmap_read(fsa->regmap, FSA4480_DEVICE_ID, &val);
+	if (ret || !val)
+		return dev_err_probe(dev, -ENODEV, "FSA4480 not found\n");
+
+	dev_dbg(dev, "Found FSA4480 v%lu.%lu (Vendor ID = %lu)\n",
+		FIELD_GET(FSA4480_DEVICE_ID_VERSION_ID, val),
+		FIELD_GET(FSA4480_DEVICE_ID_REV_ID, val),
+		FIELD_GET(FSA4480_DEVICE_ID_VENDOR_ID, val));
+
 	/* Safe mode */
 	fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
 	fsa->mode = TYPEC_STATE_SAFE;

---
base-commit: 2347b4c79f5e6cd3f4996e80c2d3c15f53006bf5
change-id: 20240212-topic-fs4480_check-caa0160fb101

Best regards,
-- 
Konrad Dybcio <konradybcio@kernel.org>


             reply	other threads:[~2024-07-26 11:43 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-26 11:43 Konrad Dybcio [this message]
2024-07-26 13:12 ` Greg Kroah-Hartman
2024-07-26 13:52   ` Konrad Dybcio
2024-07-26 16:26     ` Bjorn Andersson
2024-07-27  5:04     ` Greg Kroah-Hartman
2024-07-27 11:07 ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240726-topic-fs4480_check-v2-1-901ca449db15@kernel.org \
    --to=konradybcio@kernel.org \
    --cc=andersson@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®