From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: chenchangcheng <ccc194101@163.com>
Cc: wangyongjun@kylinos.cn, zhoulei@kylinos.cn, liuyihu@kylinos.cn,
lizhenneng@kylinos.cn, lihongtao@kylinos.cn, mchehab@kernel.org,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
chenchangcheng <chenchangcheng@kylinos.cn>
Subject: Re: [PATCH] media: uvcvideo: Block AlcorMicroCorp camera from reporting key events.
Date: Fri, 26 Jul 2024 13:20:57 +0300 [thread overview]
Message-ID: <20240726102057.GA28621@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20240723082955.2911825-1-ccc194101@163.com>
Hi Chen Changcheng,
Thank you for the patch.
On Tue, Jul 23, 2024 at 04:29:55PM +0800, chenchangcheng wrote:
> From: chenchangcheng <chenchangcheng@kylinos.cn>
>
> When opening the camera, it will send an interrupt transmission
> to the host, which is a request initiated by VS to press a button.
> But the camera does't have a physical button to send interrupt
> transmission.
Could you please send the output of `lsusb -v -d 1dfc:8513` (running as
root if possible) ?
> This button will cause the upper layer to actively turn off the camera.
> Ultimately, it resulted in the failure to open the camera.
That sounds like a weird behaviour. What upper layers are doing this ?
> Signed-off-by: chenchangcheng <chenchangcheng@kylinos.cn>
> Change-Id: Ie86c311569e8bdc891dc8af12febf6e8643e082f
> ---
> drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++
> drivers/media/usb/uvc/uvc_status.c | 6 +++++-
> drivers/media/usb/uvc/uvcvideo.h | 1 +
> 3 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index 07128e0..0bdd23b 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -2891,6 +2891,15 @@ static const struct usb_device_id uvc_ids[] = {
> .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
> .bInterfaceSubClass = 1,
> .bInterfaceProtocol = 0 },
> + /* AlcorMicroCorp Nantian Camera 8513 */
> + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
> + | USB_DEVICE_ID_MATCH_INT_INFO,
> + .idVendor = 0x1dfc,
> + .idProduct = 0x8513,
> + .bInterfaceClass = USB_CLASS_VIDEO,
> + .bInterfaceSubClass = 1,
> + .bInterfaceProtocol = 0,
> + .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_IGNORE_STATUS_EVENT) },
> /* Generic USB Video Class */
> { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) },
> { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
> diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
> index 2bdb0ff..17d68e8 100644
> --- a/drivers/media/usb/uvc/uvc_status.c
> +++ b/drivers/media/usb/uvc/uvc_status.c
> @@ -99,8 +99,12 @@ static void uvc_event_streaming(struct uvc_device *dev,
> }
>
> if (status->bEvent == 0) {
> - if (len < 4)
> + if (len < 4 || (dev->quirks & UVC_QUIRK_IGNORE_STATUS_EVENT)) {
> + uvc_trace(UVC_TRACE_STATUS, "Ignore button (intf %u) %s\n",
> + status->bOriginator,
> + status->bValue[0] ? "pressed" : "released");
> return;
> + }
> uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n",
> status->bOriginator,
> status->bValue[0] ? "pressed" : "released", len);
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index c7c1baa..8ac3c28 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -198,6 +198,7 @@
> #define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
> #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
> #define UVC_QUIRK_FORCE_Y8 0x00000800
> +#define UVC_QUIRK_IGNORE_STATUS_EVENT 0x00001000
>
> /* Format flags */
> #define UVC_FMT_FLAG_COMPRESSED 0x00000001
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2024-07-26 10:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-23 8:29 chenchangcheng
2024-07-26 10:20 ` Laurent Pinchart [this message]
[not found] ` <422515098.1778903.1722214797868.JavaMail.root@mail-tracker-183-3ep34-kunp1-54f898d94d-qbtjz>
2024-07-29 8:35 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240726102057.GA28621@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=ccc194101@163.com \
--cc=chenchangcheng@kylinos.cn \
--cc=lihongtao@kylinos.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=liuyihu@kylinos.cn \
--cc=lizhenneng@kylinos.cn \
--cc=mchehab@kernel.org \
--cc=wangyongjun@kylinos.cn \
--cc=zhoulei@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®