[PATCH 3/7] can: m_can: Remove m_can_rx_peripheral indirection

[Markus Schneider-Pargmann <msp@baylibre.com>]

m_can_rx_peripheral() is a wrapper around m_can_rx_handler() that calls
m_can_disable_all_interrupts() on error. The same handling for the same
error path is done in m_can_isr() as well.

So remove m_can_rx_peripheral() and do the call from m_can_isr()
directly.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/net/can/m_can/m_can.c | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index fd600ab93218..42ed7f0fea78 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1037,22 +1037,6 @@ static int m_can_rx_handler(struct net_device *dev, int quota, u32 irqstatus)
 	return work_done;
 }
 
-static int m_can_rx_peripheral(struct net_device *dev, u32 irqstatus)
-{
-	struct m_can_classdev *cdev = netdev_priv(dev);
-	int work_done;
-
-	work_done = m_can_rx_handler(dev, NAPI_POLL_WEIGHT, irqstatus);
-
-	/* Don't re-enable interrupts if the driver had a fatal error
-	 * (e.g., FIFO read failure).
-	 */
-	if (work_done < 0)
-		m_can_disable_all_interrupts(cdev);
-
-	return work_done;
-}
-
 static int m_can_poll(struct napi_struct *napi, int quota)
 {
 	struct net_device *dev = napi->dev;
@@ -1250,7 +1234,7 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)
 		} else {
 			int pkts;
 
-			pkts = m_can_rx_peripheral(dev, ir);
+			pkts = m_can_rx_handler(dev, NAPI_POLL_WEIGHT, ir);
 			if (pkts < 0)
 				goto out_fail;
 		}
-- 
2.45.2