From: Steven Rostedt <rostedt@goodmis.org>
To: tglozar@redhat.com
Cc: linux-trace-kernel@vger.kernel.org, linux-kernel@vger.kernel.org,
jwyatt@redhat.com, jkacur@redhat.com
Subject: Re: [PATCH v2 3/6] rtla/utils: Add idle state disabling via libcpupower
Date: Wed, 31 Jul 2024 11:41:37 -0400 [thread overview]
Message-ID: <20240731114137.21499fed@gandalf.local.home> (raw)
In-Reply-To: <20240731083655.375293-4-tglozar@redhat.com>
On Wed, 31 Jul 2024 10:36:52 +0200
tglozar@redhat.com wrote:
> From: Tomas Glozar <tglozar@redhat.com>
>
> Add functions to utils.c to disable idle states through functions of
> libcpupower. This will serve as the basis for disabling idle states
> per cpu when running timerlat.
>
> Signed-off-by: Tomas Glozar <tglozar@redhat.com>
> ---
> tools/tracing/rtla/src/utils.c | 140 +++++++++++++++++++++++++++++++++
> tools/tracing/rtla/src/utils.h | 6 ++
> 2 files changed, 146 insertions(+)
>
> diff --git a/tools/tracing/rtla/src/utils.c b/tools/tracing/rtla/src/utils.c
> index 9ac71a66840c..9279b8ce08c3 100644
> --- a/tools/tracing/rtla/src/utils.c
> +++ b/tools/tracing/rtla/src/utils.c
> @@ -4,6 +4,9 @@
> */
>
> #define _GNU_SOURCE
> +#ifdef HAVE_LIBCPUPOWER_SUPPORT
> +#include <cpuidle.h>
> +#endif /* HAVE_LIBCPUPOWER_SUPPORT */
> #include <dirent.h>
> #include <stdarg.h>
> #include <stdlib.h>
> @@ -519,6 +522,143 @@ int set_cpu_dma_latency(int32_t latency)
> return fd;
> }
>
> +#ifdef HAVE_LIBCPUPOWER_SUPPORT
> +static unsigned int **saved_cpu_idle_disable_state;
> +static size_t saved_cpu_idle_disable_state_alloc_ctr;
> +
> +/*
> + * save_cpu_idle_state_disable - save disable for all idle states of a cpu
> + *
> + * Saves the current disable of all idle states of a cpu, to be subsequently
> + * restored via restore_cpu_idle_disable_state.
> + *
> + * Return: idle state count on success, negative on error
> + */
> +int save_cpu_idle_disable_state(unsigned int cpu)
> +{
> + unsigned int nr_states;
> + unsigned int state;
> + int disabled;
> + int nr_cpus;
> +
> + nr_states = cpuidle_state_count(cpu);
> +
> + if (nr_states == 0)
> + return 0;
> +
> + if (saved_cpu_idle_disable_state == NULL) {
> + nr_cpus = sysconf(_SC_NPROCESSORS_CONF);
> + saved_cpu_idle_disable_state = calloc(nr_cpus, sizeof(unsigned int *));
Need to check if the calloc failed and return an error if it did.
> + }
> +
> + saved_cpu_idle_disable_state[cpu] = calloc(nr_states, sizeof(unsigned int));
Here too.
> + saved_cpu_idle_disable_state_alloc_ctr++;
> +
> + for (state = 0; state < nr_states; state++) {
> + disabled = cpuidle_is_state_disabled(cpu, state);
> + if (disabled < 0)
> + return disabled;
Hmm, should this warn if state is not zero and disabled is negative.
> + saved_cpu_idle_disable_state[cpu][state] = disabled;
> + }
> +
> + return nr_states;
> +}
> +
> +/*
> + * restore_cpu_idle_disable_state - restore disable for all idle states of a cpu
> + *
> + * Restores the current disable state of all idle states of a cpu that was
> + * previously saved by save_cpu_idle_disable_state.
> + *
> + * Return: idle state count on success, negative on error
> + */
> +int restore_cpu_idle_disable_state(unsigned int cpu)
> +{
> + unsigned int nr_states;
> + unsigned int state;
> + int disabled;
> + int result;
> +
Should probably have a check to see if saved_cpu_idle_disable exists.
> + nr_states = cpuidle_state_count(cpu);
> +
> + if (nr_states == 0)
> + return 0;
> +
As well as saved_cpu_idle_disable_state[cpu] exists.
Just for robustness.
> + for (state = 0; state < nr_states; state++) {
> + disabled = saved_cpu_idle_disable_state[cpu][state];
> + result = cpuidle_state_disable(cpu, state, disabled);
> + if (result < 0)
> + return result;
> + }
> +
> + free(saved_cpu_idle_disable_state[cpu]);
> + saved_cpu_idle_disable_state[cpu] = NULL;
> + saved_cpu_idle_disable_state_alloc_ctr--;
> + if (saved_cpu_idle_disable_state_alloc_ctr == 0) {
> + free(saved_cpu_idle_disable_state);
> + saved_cpu_idle_disable_state = NULL;
> + }
> +
> + return nr_states;
> +}
> +
> +/*
> + * free_cpu_idle_disable_states - free saved idle state disable for all cpus
> + *
> + * Frees the memory used for storing cpu idle state disable for all cpus
> + * and states.
> + *
> + * Normally, the memory is freed automatically in
> + * restore_cpu_idle_disable_state; this is mostly for cleaning up after an
> + * error.
> + */
> +void free_cpu_idle_disable_states(void)
> +{
> + int cpu;
> +
> + if (!saved_cpu_idle_disable_state)
> + return;
> +
> + for (cpu = 0; cpu < sysconf(_SC_NPROCESSORS_CONF); cpu++) {
> + if (!saved_cpu_idle_disable_state[cpu])
> + continue;
No need to check here. free() works fine with passing NULL to it.
-- Steve
> + free(saved_cpu_idle_disable_state[cpu]);
> + saved_cpu_idle_disable_state[cpu] = NULL;
> + }
> +
> + free(saved_cpu_idle_disable_state);
> + saved_cpu_idle_disable_state = NULL;
> +}
> +
> +/*
> + * set_deepest_cpu_idle_state - limit idle state of cpu
> + *
> + * Disables all idle states deeper than the one given in
> + * deepest_state (assuming states with higher number are deeper).
> + *
> + * This is used to reduce the exit from idle latency. Unlike
> + * set_cpu_dma_latency, it can disable idle states per cpu.
> + *
> + * Return: idle state count on success, negative on error
> + */
> +int set_deepest_cpu_idle_state(unsigned int cpu, unsigned int deepest_state)
> +{
> + unsigned int nr_states;
> + unsigned int state;
> + int result;
> +
> + nr_states = cpuidle_state_count(cpu);
> +
> + for (state = deepest_state + 1; state < nr_states; state++) {
> + result = cpuidle_state_disable(cpu, state, 1);
> + if (result < 0)
> + return result;
> + }
> +
> + return nr_states;
> +}
> +#endif /* HAVE_LIBCPUPOWER_SUPPORT */
> +
> #define _STR(x) #x
> #define STR(x) _STR(x)
>
> diff --git a/tools/tracing/rtla/src/utils.h b/tools/tracing/rtla/src/utils.h
> index d44513e6c66a..51b6054c2679 100644
> --- a/tools/tracing/rtla/src/utils.h
> +++ b/tools/tracing/rtla/src/utils.h
> @@ -64,6 +64,12 @@ int set_comm_sched_attr(const char *comm_prefix, struct sched_attr *attr);
> int set_comm_cgroup(const char *comm_prefix, const char *cgroup);
> int set_pid_cgroup(pid_t pid, const char *cgroup);
> int set_cpu_dma_latency(int32_t latency);
> +#ifdef HAVE_LIBCPUPOWER_SUPPORT
> +int save_cpu_idle_disable_state(unsigned int cpu);
> +int restore_cpu_idle_disable_state(unsigned int cpu);
> +void free_cpu_idle_disable_states(void);
> +int set_deepest_cpu_idle_state(unsigned int cpu, unsigned int state);
> +#endif /* HAVE_LIBCPUPOWER_SUPPORT */
> int auto_house_keeping(cpu_set_t *monitored_cpus);
>
> #define ns_to_usf(x) (((double)x/1000))
next prev parent reply other threads:[~2024-07-31 15:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-31 8:36 [PATCH v2 0/6] rtla: Support idle state disabling via libcpupower in timerlat tglozar
2024-07-31 8:36 ` [PATCH v2 1/6] tools/build: Add libcpupower dependency detection tglozar
2024-07-31 8:36 ` [PATCH v2 2/6] rtla: Add optional dependency on libcpupower tglozar
2024-07-31 8:36 ` [PATCH v2 3/6] rtla/utils: Add idle state disabling via libcpupower tglozar
2024-07-31 15:41 ` Steven Rostedt [this message]
2024-08-01 9:44 ` Tomas Glozar
2024-07-31 8:36 ` [PATCH v2 4/6] rtla/timerlat: Add --deepest-idle-state for top tglozar
2024-07-31 15:52 ` Steven Rostedt
2024-08-01 10:20 ` Tomas Glozar
2024-07-31 8:36 ` [PATCH v2 5/6] rtla/timerlat: Add --deepest-idle-state for hist tglozar
2024-07-31 8:36 ` [PATCH v2 6/6] rtla: Documentation: Mention --deepest-idle-state tglozar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240731114137.21499fed@gandalf.local.home \
--to=rostedt@goodmis.org \
--cc=jkacur@redhat.com \
--cc=jwyatt@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=tglozar@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®