mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: John Ogness <john.ogness@linutronix.de>
To: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
	Steven Rostedt <rostedt@goodmis.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH printk v7 31/35] printk: nbcon: Implement emergency sections
Date: Sun,  4 Aug 2024 02:57:34 +0206	[thread overview]
Message-ID: <20240804005138.3722656-32-john.ogness@linutronix.de> (raw)
In-Reply-To: <20240804005138.3722656-1-john.ogness@linutronix.de>

From: Thomas Gleixner <tglx@linutronix.de>

In emergency situations (something has gone wrong but the
system continues to operate), usually important information
(such as a backtrace) is generated via printk(). This
information should be pushed out to the consoles ASAP.

Add per-CPU emergency nesting tracking because an emergency
can arise while in an emergency situation.

Add functions to mark the beginning and end of emergency
sections where the urgent messages are generated.

Perform direct console flushing at the emergency priority if
the current CPU is in an emergency state and it is safe to do
so.

Note that the emergency state is not system-wide. While one CPU
is in an emergency state, another CPU may attempt to print
console messages at normal priority.

Also note that printk() already attempts to flush consoles in
the caller context for normal priority. However, follow-up
changes will introduce printing kthreads, in which case the
normal priority printk() calls will offload to the kthreads.

Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
---
 include/linux/console.h  |  4 +++
 kernel/printk/internal.h |  1 +
 kernel/printk/nbcon.c    | 75 +++++++++++++++++++++++++++++++++++++++-
 3 files changed, 79 insertions(+), 1 deletion(-)

diff --git a/include/linux/console.h b/include/linux/console.h
index 3706f944de46..9a13f91b0c43 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -553,10 +553,14 @@ static inline bool console_is_registered(const struct console *con)
 	hlist_for_each_entry(con, &console_list, node)
 
 #ifdef CONFIG_PRINTK
+extern void nbcon_cpu_emergency_enter(void);
+extern void nbcon_cpu_emergency_exit(void);
 extern bool nbcon_can_proceed(struct nbcon_write_context *wctxt);
 extern bool nbcon_enter_unsafe(struct nbcon_write_context *wctxt);
 extern bool nbcon_exit_unsafe(struct nbcon_write_context *wctxt);
 #else
+static inline void nbcon_cpu_emergency_enter(void) { }
+static inline void nbcon_cpu_emergency_exit(void) { }
 static inline bool nbcon_can_proceed(struct nbcon_write_context *wctxt) { return false; }
 static inline bool nbcon_enter_unsafe(struct nbcon_write_context *wctxt) { return false; }
 static inline bool nbcon_exit_unsafe(struct nbcon_write_context *wctxt) { return false; }
diff --git a/kernel/printk/internal.h b/kernel/printk/internal.h
index 58eb2a58b07b..f51225a56f5f 100644
--- a/kernel/printk/internal.h
+++ b/kernel/printk/internal.h
@@ -185,6 +185,7 @@ static inline void printk_get_console_flush_type(struct console_flush_type *ft)
 
 	switch (nbcon_get_default_prio()) {
 	case NBCON_PRIO_NORMAL:
+	case NBCON_PRIO_EMERGENCY:
 		if (have_nbcon_console && !have_boot_console)
 			ft->nbcon_atomic = true;
 
diff --git a/kernel/printk/nbcon.c b/kernel/printk/nbcon.c
index 9e13327b4fe3..a5551d8cbd50 100644
--- a/kernel/printk/nbcon.c
+++ b/kernel/printk/nbcon.c
@@ -972,6 +972,36 @@ static bool nbcon_emit_next_record(struct nbcon_write_context *wctxt)
 	return nbcon_context_exit_unsafe(ctxt);
 }
 
+/* Track the nbcon emergency nesting per CPU. */
+static DEFINE_PER_CPU(unsigned int, nbcon_pcpu_emergency_nesting);
+static unsigned int early_nbcon_pcpu_emergency_nesting __initdata;
+
+/**
+ * nbcon_get_cpu_emergency_nesting - Get the per CPU emergency nesting pointer
+ *
+ * Context:	For reading, any context. For writing, any context which could
+ *		not be migrated to another CPU.
+ * Return:	Either a pointer to the per CPU emergency nesting counter of
+ *		the current CPU or to the init data during early boot.
+ *
+ * The function is safe for reading per-CPU variables in any context because
+ * preemption is disabled if the current CPU is in the emergency state. See
+ * also nbcon_cpu_emergency_enter().
+ */
+static __ref unsigned int *nbcon_get_cpu_emergency_nesting(void)
+{
+	/*
+	 * The value of __printk_percpu_data_ready gets set in normal
+	 * context and before SMP initialization. As a result it could
+	 * never change while inside an nbcon emergency section.
+	 */
+	if (!printk_percpu_data_ready())
+		return &early_nbcon_pcpu_emergency_nesting;
+
+	/* Open code this_cpu_ptr() without checking migration. */
+	return per_cpu_ptr(&nbcon_pcpu_emergency_nesting, raw_smp_processor_id());
+}
+
 /**
  * nbcon_get_default_prio - The appropriate nbcon priority to use for nbcon
  *				printing on the current CPU
@@ -981,13 +1011,20 @@ static bool nbcon_emit_next_record(struct nbcon_write_context *wctxt)
  *		context for printing.
  *
  * The function is safe for reading per-CPU data in any context because
- * preemption is disabled if the current CPU is in the panic state.
+ * preemption is disabled if the current CPU is in the emergency or panic
+ * state.
  */
 enum nbcon_prio nbcon_get_default_prio(void)
 {
+	unsigned int *cpu_emergency_nesting;
+
 	if (this_cpu_in_panic())
 		return NBCON_PRIO_PANIC;
 
+	cpu_emergency_nesting = nbcon_get_cpu_emergency_nesting();
+	if (*cpu_emergency_nesting)
+		return NBCON_PRIO_EMERGENCY;
+
 	return NBCON_PRIO_NORMAL;
 }
 
@@ -1255,6 +1292,42 @@ void nbcon_atomic_flush_unsafe(void)
 	__nbcon_atomic_flush_pending(prb_next_reserve_seq(prb), true);
 }
 
+/**
+ * nbcon_cpu_emergency_enter - Enter an emergency section where printk()
+ *				messages for that CPU are flushed directly
+ *
+ * Context:	Any context. Disables preemption.
+ *
+ * When within an emergency section, printk() calls will attempt to flush any
+ * pending messages in the ringbuffer.
+ */
+void nbcon_cpu_emergency_enter(void)
+{
+	unsigned int *cpu_emergency_nesting;
+
+	preempt_disable();
+
+	cpu_emergency_nesting = nbcon_get_cpu_emergency_nesting();
+	(*cpu_emergency_nesting)++;
+}
+
+/**
+ * nbcon_cpu_emergency_exit - Exit an emergency section
+ *
+ * Context:	Within an emergency section. Enables preemption.
+ */
+void nbcon_cpu_emergency_exit(void)
+{
+	unsigned int *cpu_emergency_nesting;
+
+	cpu_emergency_nesting = nbcon_get_cpu_emergency_nesting();
+
+	if (!WARN_ON_ONCE(*cpu_emergency_nesting == 0))
+		(*cpu_emergency_nesting)--;
+
+	preempt_enable();
+}
+
 /**
  * nbcon_alloc - Allocate and init the nbcon console specific data
  * @con:	Console to initialize
-- 
2.39.2


  parent reply	other threads:[~2024-08-04  0:51 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-04  0:51 [PATCH printk v7 00/35] wire up write_atomic() printing John Ogness
2024-08-04  0:51 ` [PATCH printk v7 01/35] printk: Add notation to console_srcu locking John Ogness
2024-08-04  0:51 ` [PATCH printk v7 02/35] printk: nbcon: Consolidate alloc() and init() John Ogness
2024-08-05 14:39   ` Petr Mladek
2024-08-04  0:51 ` [PATCH printk v7 03/35] printk: Properly deal with nbcon consoles on seq init John Ogness
2024-08-04  0:51 ` [PATCH printk v7 04/35] printk: Check printk_deferred_enter()/_exit() usage John Ogness
2024-08-04  0:51 ` [PATCH printk v7 05/35] printk: nbcon: Clarify rules of the owner/waiter matching John Ogness
2024-08-04  0:51 ` [PATCH printk v7 06/35] printk: nbcon: Remove return value for write_atomic() John Ogness
2024-08-04  0:51 ` [PATCH printk v7 07/35] printk: nbcon: Add detailed doc " John Ogness
2024-08-04  0:51 ` [PATCH printk v7 08/35] printk: nbcon: Add callbacks to synchronize with driver John Ogness
2024-08-04  0:51 ` [PATCH printk v7 09/35] printk: nbcon: Use driver synchronization while (un)registering John Ogness
2024-08-04  0:51 ` [PATCH printk v7 10/35] serial: core: Provide low-level functions to lock port John Ogness
2024-08-04  0:51 ` [PATCH printk v7 11/35] serial: core: Introduce wrapper to set @uart_port->cons John Ogness
2024-08-04  0:51 ` [PATCH printk v7 12/35] console: Improve console_srcu_read_flags() comments John Ogness
2024-08-04  0:51 ` [PATCH printk v7 13/35] nbcon: Add API to acquire context for non-printing operations John Ogness
2024-08-04  0:51 ` [PATCH printk v7 14/35] serial: core: Acquire nbcon context in port->lock wrapper John Ogness
2024-08-04  0:51 ` [PATCH printk v7 15/35] printk: nbcon: Do not rely on proxy headers John Ogness
2024-08-04  0:51 ` [PATCH printk v7 16/35] printk: Make console_is_usable() available to nbcon.c John Ogness
2024-08-04  0:51 ` [PATCH printk v7 17/35] printk: Let console_is_usable() handle nbcon John Ogness
2024-08-04  0:51 ` [PATCH printk v7 18/35] printk: Add @flags argument for console_is_usable() John Ogness
2024-08-04  0:51 ` [PATCH printk v7 19/35] printk: nbcon: Add helper to assign priority based on CPU state John Ogness
2024-08-04  0:51 ` [PATCH printk v7 20/35] printk: nbcon: Provide function to flush using write_atomic() John Ogness
2024-08-05 14:59   ` Petr Mladek
2024-08-04  0:51 ` [PATCH printk v7 21/35] printk: Track registered boot consoles John Ogness
2024-08-04  0:51 ` [PATCH printk v7 22/35] printk: nbcon: Use nbcon consoles in console_flush_all() John Ogness
2024-08-04  0:51 ` [PATCH printk v7 23/35] printk: Add is_printk_legacy_deferred() John Ogness
2024-08-05 15:03   ` Petr Mladek
2024-08-04  0:51 ` [PATCH printk v7 24/35] printk: nbcon: Flush new records on device_release() John Ogness
2024-08-05 15:31   ` Petr Mladek
2024-08-07  1:15     ` John Ogness
2024-08-07 12:48       ` Petr Mladek
2024-08-04  0:51 ` [PATCH printk v7 25/35] printk: Flush nbcon consoles first on panic John Ogness
2024-08-06  8:31   ` Petr Mladek
2024-08-04  0:51 ` [PATCH printk v7 26/35] printk: nbcon: Add unsafe flushing " John Ogness
2024-08-04  0:51 ` [PATCH printk v7 27/35] printk: Avoid console_lock dance if no legacy or boot consoles John Ogness
2024-08-06  8:40   ` Petr Mladek
2024-08-04  0:51 ` [PATCH printk v7 28/35] printk: Track nbcon consoles John Ogness
2024-08-04  0:51 ` [PATCH printk v7 29/35] printk: Coordinate direct printing in panic John Ogness
2024-08-06  9:59   ` Petr Mladek
2024-08-06 17:29     ` Linus Torvalds
2024-08-06 12:17   ` Petr Mladek
2024-08-04  0:51 ` [PATCH printk v7 30/35] printk: Add helper for flush type logic John Ogness
2024-08-07 11:39   ` Petr Mladek
2024-08-07 14:11     ` John Ogness
2024-08-08  9:03       ` Petr Mladek
2024-08-04  0:51 ` John Ogness [this message]
2024-08-07 12:52   ` [PATCH printk v7 31/35] printk: nbcon: Implement emergency sections Petr Mladek
2024-08-04  0:51 ` [PATCH printk v7 32/35] panic: Mark emergency section in warn John Ogness
2024-08-04  0:51 ` [PATCH printk v7 33/35] panic: Mark emergency section in oops John Ogness
2024-08-04  0:51 ` [PATCH printk v7 34/35] rcu: Mark emergency sections in rcu stalls John Ogness
2024-08-04  0:51 ` [PATCH printk v7 35/35] lockdep: Mark emergency sections in lockdep splats John Ogness

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240804005138.3722656-32-john.ogness@linutronix.de \
    --to=john.ogness@linutronix.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmladek@suse.com \
    --cc=rostedt@goodmis.org \
    --cc=senozhatsky@chromium.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®