[PATCH net v2] net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities

[Florian Fainelli <florian.fainelli@broadcom.com>]

Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.

Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
Changes in v2:

- corrected email address

 drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
index 1248792d7fd4..0715ea5bf13e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -42,19 +42,15 @@ void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device *kdev = &priv->pdev->dev;
 
-	if (dev->phydev) {
+	if (dev->phydev)
 		phy_ethtool_get_wol(dev->phydev, wol);
-		if (wol->supported)
-			return;
-	}
 
-	if (!device_can_wakeup(kdev)) {
-		wol->supported = 0;
-		wol->wolopts = 0;
+	/* MAC is not wake-up capable, return what the PHY does */
+	if (!device_can_wakeup(kdev))
 		return;
-	}
 
-	wol->supported = WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_FILTER;
+	/* Overlay MAC capabilities with that of the PHY queried before */
+	wol->supported |= WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_FILTER;
 	wol->wolopts = priv->wolopts;
 	memset(wol->sopass, 0, sizeof(wol->sopass));
 
-- 
2.34.1