From: Abin Joseph <abin.joseph@amd.com>
To: <vkoul@kernel.org>, <michal.simek@amd.com>, <robh@kernel.org>,
<conor+dt@kernel.org>, <krzk+dt@kernel.org>,
<u.kleine-koenig@pengutronix.de>, <radhey.shyam.pandey@amd.com>,
<harini.katakam@amd.com>
Cc: <git@amd.com>, <abin.joseph@amd.com>, <dmaengine@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 2/2] dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
Date: Thu, 8 Aug 2024 15:30:24 +0530 [thread overview]
Message-ID: <20240808100024.317497-3-abin.joseph@amd.com> (raw)
In-Reply-To: <20240808100024.317497-1-abin.joseph@amd.com>
ZynqMP DMA IP and AMD Versal Gen 2 DMA IP are similar but have different
interrupt register offset. Create a dedicated compatible string to
support Versal Gen 2 DMA IP with Irq register offset for interrupt
Enable/Disable/Status/Mask functionality.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
---
Changes in v2:
- Update the logic to use of_device_get_match_data
instead of of_device_is_compatible.
- Use lower case hexa decimal value for macros.
---
drivers/dma/xilinx/zynqmp_dma.c | 27 +++++++++++++++++++++++----
1 file changed, 23 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index f31631bef961..9ae46f1198fe 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -22,10 +22,10 @@
#include "../dmaengine.h"
/* Register Offsets */
-#define ZYNQMP_DMA_ISR 0x100
-#define ZYNQMP_DMA_IMR 0x104
-#define ZYNQMP_DMA_IER 0x108
-#define ZYNQMP_DMA_IDS 0x10C
+#define ZYNQMP_DMA_ISR (chan->irq_offset + 0x100)
+#define ZYNQMP_DMA_IMR (chan->irq_offset + 0x104)
+#define ZYNQMP_DMA_IER (chan->irq_offset + 0x108)
+#define ZYNQMP_DMA_IDS (chan->irq_offset + 0x10c)
#define ZYNQMP_DMA_CTRL0 0x110
#define ZYNQMP_DMA_CTRL1 0x114
#define ZYNQMP_DMA_DATA_ATTR 0x120
@@ -145,6 +145,9 @@
#define tx_to_desc(tx) container_of(tx, struct zynqmp_dma_desc_sw, \
async_tx)
+/* IRQ Register offset for Versal Gen 2 */
+#define IRQ_REG_OFFSET 0x308
+
/**
* struct zynqmp_dma_desc_ll - Hw linked list descriptor
* @addr: Buffer address
@@ -211,6 +214,7 @@ struct zynqmp_dma_desc_sw {
* @bus_width: Bus width
* @src_burst_len: Source burst length
* @dst_burst_len: Dest burst length
+ * @irq_offset: Irq register offset
*/
struct zynqmp_dma_chan {
struct zynqmp_dma_device *zdev;
@@ -235,6 +239,7 @@ struct zynqmp_dma_chan {
u32 bus_width;
u32 src_burst_len;
u32 dst_burst_len;
+ u32 irq_offset;
};
/**
@@ -253,6 +258,14 @@ struct zynqmp_dma_device {
struct clk *clk_apb;
};
+struct zynqmp_dma_config {
+ u32 offset;
+};
+
+static const struct zynqmp_dma_config versal2_dma_config = {
+ .offset = IRQ_REG_OFFSET,
+};
+
static inline void zynqmp_dma_writeq(struct zynqmp_dma_chan *chan, u32 reg,
u64 value)
{
@@ -892,6 +905,7 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
{
struct zynqmp_dma_chan *chan;
struct device_node *node = pdev->dev.of_node;
+ const struct zynqmp_dma_config *match_data;
int err;
chan = devm_kzalloc(zdev->dev, sizeof(*chan), GFP_KERNEL);
@@ -919,6 +933,10 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
return -EINVAL;
}
+ match_data = of_device_get_match_data(&pdev->dev);
+ if (match_data)
+ chan->irq_offset = match_data->offset;
+
chan->is_dmacoherent = of_property_read_bool(node, "dma-coherent");
zdev->chan = chan;
tasklet_setup(&chan->tasklet, zynqmp_dma_do_tasklet);
@@ -1161,6 +1179,7 @@ static void zynqmp_dma_remove(struct platform_device *pdev)
}
static const struct of_device_id zynqmp_dma_of_match[] = {
+ { .compatible = "amd,versal2-dma-1.0", .data = &versal2_dma_config },
{ .compatible = "xlnx,zynqmp-dma-1.0", },
{}
};
--
2.34.1
next prev parent reply other threads:[~2024-08-08 10:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-08 10:00 [PATCH v2 0/2] Add support for ADMA Abin Joseph
2024-08-08 10:00 ` [PATCH v2 1/2] dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string Abin Joseph
2024-08-08 10:12 ` Krzysztof Kozlowski
2024-08-08 10:00 ` Abin Joseph [this message]
2024-08-09 12:55 ` [PATCH v2 2/2] dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP Pandey, Radhey Shyam
2024-08-29 17:30 ` [PATCH v2 0/2] Add support for ADMA Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240808100024.317497-3-abin.joseph@amd.com \
--to=abin.joseph@amd.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=git@amd.com \
--cc=harini.katakam@amd.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=radhey.shyam.pandey@amd.com \
--cc=robh@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®