From: David Lin <yu-hao.lin@nxp.com>
To: linux-wireless@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kvalo@kernel.org,
johannes@sipsolutions.net, briannorris@chromium.org,
francesco@dolcini.it, tsung-hsien.hsieh@nxp.com,
David Lin <yu-hao.lin@nxp.com>
Subject: [PATCH v2 31/43] wifi: nxpwifi: add sta_rx.c
Date: Fri, 9 Aug 2024 17:45:21 +0800 [thread overview]
Message-ID: <20240809094533.1660-32-yu-hao.lin@nxp.com> (raw)
In-Reply-To: <20240809094533.1660-1-yu-hao.lin@nxp.com>
---
drivers/net/wireless/nxp/nxpwifi/sta_rx.c | 244 ++++++++++++++++++++++
1 file changed, 244 insertions(+)
create mode 100644 drivers/net/wireless/nxp/nxpwifi/sta_rx.c
diff --git a/drivers/net/wireless/nxp/nxpwifi/sta_rx.c b/drivers/net/wireless/nxp/nxpwifi/sta_rx.c
new file mode 100644
index 000000000000..e1608299a841
--- /dev/null
+++ b/drivers/net/wireless/nxp/nxpwifi/sta_rx.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NXP Wireless LAN device driver: station RX data handling
+ *
+ * Copyright 2011-2024 NXP
+ */
+
+#include <uapi/linux/ipv6.h>
+#include <net/ndisc.h>
+#include "decl.h"
+#include "cfg.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "11n_aggr.h"
+#include "11n_rxreorder.h"
+
+/* This function checks if a frame is IPv4 ARP or IPv6 Neighbour advertisement
+ * frame. If frame has both source and destination mac address as same, this
+ * function drops such gratuitous frames.
+ */
+static bool
+nxpwifi_discard_gratuitous_arp(struct nxpwifi_private *priv,
+ struct sk_buff *skb)
+{
+ const struct nxpwifi_arp_eth_header *arp;
+ struct ethhdr *eth;
+ struct ipv6hdr *ipv6;
+ struct icmp6hdr *icmpv6;
+
+ eth = (struct ethhdr *)skb->data;
+ switch (ntohs(eth->h_proto)) {
+ case ETH_P_ARP:
+ arp = (void *)(skb->data + sizeof(struct ethhdr));
+ if (arp->hdr.ar_op == htons(ARPOP_REPLY) ||
+ arp->hdr.ar_op == htons(ARPOP_REQUEST)) {
+ if (!memcmp(arp->ar_sip, arp->ar_tip, 4))
+ return true;
+ }
+ break;
+ case ETH_P_IPV6:
+ ipv6 = (void *)(skb->data + sizeof(struct ethhdr));
+ icmpv6 = (void *)(skb->data + sizeof(struct ethhdr) +
+ sizeof(struct ipv6hdr));
+ if (icmpv6->icmp6_type == NDISC_NEIGHBOUR_ADVERTISEMENT) {
+ if (!memcmp(&ipv6->saddr, &ipv6->daddr,
+ sizeof(struct in6_addr)))
+ return true;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+/* This function processes the received packet and forwards it
+ * to kernel/upper layer.
+ *
+ * This function parses through the received packet and determines
+ * if it is a debug packet or normal packet.
+ *
+ * For non-debug packets, the function chops off unnecessary leading
+ * header bytes, reconstructs the packet as an ethernet frame or
+ * 802.2/llc/snap frame as required, and sends it to kernel/upper layer.
+ *
+ * The completion callback is called after processing in complete.
+ */
+int nxpwifi_process_rx_packet(struct nxpwifi_private *priv,
+ struct sk_buff *skb)
+{
+ int ret;
+ struct rx_packet_hdr *rx_pkt_hdr;
+ struct rxpd *local_rx_pd;
+ int hdr_chop;
+ struct ethhdr *eth;
+ u16 rx_pkt_off;
+ u8 adj_rx_rate = 0;
+
+ local_rx_pd = (struct rxpd *)(skb->data);
+
+ rx_pkt_off = le16_to_cpu(local_rx_pd->rx_pkt_offset);
+ rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_off;
+
+ if (sizeof(rx_pkt_hdr->eth803_hdr) + sizeof(rfc1042_header) +
+ rx_pkt_off > skb->len) {
+ priv->stats.rx_dropped++;
+ dev_kfree_skb_any(skb);
+ return -EINVAL;
+ }
+
+ if (sizeof(*rx_pkt_hdr) + rx_pkt_off <= skb->len &&
+ ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
+ sizeof(bridge_tunnel_header))) ||
+ (!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
+ sizeof(rfc1042_header)) &&
+ rx_pkt_hdr->rfc1042_hdr.snap_type != htons(ETH_P_AARP) &&
+ rx_pkt_hdr->rfc1042_hdr.snap_type != htons(ETH_P_IPX)))) {
+ /* Replace the 803 header and rfc1042 header (llc/snap) with an
+ * EthernetII header, keep the src/dst and snap_type
+ * (ethertype).
+ * The firmware only passes up SNAP frames converting
+ * all RX Data from 802.11 to 802.2/LLC/SNAP frames.
+ * To create the Ethernet II, just move the src, dst address
+ * right before the snap_type.
+ */
+ eth = (struct ethhdr *)
+ ((u8 *)&rx_pkt_hdr->eth803_hdr
+ + sizeof(rx_pkt_hdr->eth803_hdr) +
+ sizeof(rx_pkt_hdr->rfc1042_hdr)
+ - sizeof(rx_pkt_hdr->eth803_hdr.h_dest)
+ - sizeof(rx_pkt_hdr->eth803_hdr.h_source)
+ - sizeof(rx_pkt_hdr->rfc1042_hdr.snap_type));
+
+ memcpy(eth->h_source, rx_pkt_hdr->eth803_hdr.h_source,
+ sizeof(eth->h_source));
+ memcpy(eth->h_dest, rx_pkt_hdr->eth803_hdr.h_dest,
+ sizeof(eth->h_dest));
+
+ /* Chop off the rxpd + the excess memory from the 802.2/llc/snap
+ * header that was removed.
+ */
+ hdr_chop = (u8 *)eth - (u8 *)local_rx_pd;
+ } else {
+ /* Chop off the rxpd */
+ hdr_chop = (u8 *)&rx_pkt_hdr->eth803_hdr - (u8 *)local_rx_pd;
+ }
+
+ /* Chop off the leading header bytes so the it points to the start of
+ * either the reconstructed EthII frame or the 802.2/llc/snap frame
+ */
+ skb_pull(skb, hdr_chop);
+
+ if (priv->hs2_enabled &&
+ nxpwifi_discard_gratuitous_arp(priv, skb)) {
+ nxpwifi_dbg(priv->adapter, INFO, "Bypassed Gratuitous ARP\n");
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+
+ /* Only stash RX bitrate for unicast packets. */
+ if (likely(!is_multicast_ether_addr(rx_pkt_hdr->eth803_hdr.h_dest))) {
+ priv->rxpd_rate = local_rx_pd->rx_rate;
+ priv->rxpd_htinfo = local_rx_pd->ht_info;
+ }
+
+ if (GET_BSS_ROLE(priv) == NXPWIFI_BSS_ROLE_STA ||
+ GET_BSS_ROLE(priv) == NXPWIFI_BSS_ROLE_UAP) {
+ adj_rx_rate = nxpwifi_adjust_data_rate(priv,
+ local_rx_pd->rx_rate,
+ local_rx_pd->ht_info);
+ nxpwifi_hist_data_add(priv, adj_rx_rate, local_rx_pd->snr,
+ local_rx_pd->nf);
+ }
+
+ ret = nxpwifi_recv_packet(priv, skb);
+ if (ret)
+ nxpwifi_dbg(priv->adapter, ERROR,
+ "recv packet failed\n");
+
+ return ret;
+}
+
+/* This function processes the received buffer.
+ *
+ * The function looks into the RxPD and performs sanity tests on the
+ * received buffer to ensure its a valid packet, before processing it
+ * further. If the packet is determined to be aggregated, it is
+ * de-aggregated accordingly. Non-unicast packets are sent directly to
+ * the kernel/upper layers. Unicast packets are handed over to the
+ * Rx reordering routine if 11n is enabled.
+ *
+ * The completion callback is called after processing in complete.
+ */
+int nxpwifi_process_sta_rx_packet(struct nxpwifi_private *priv,
+ struct sk_buff *skb)
+{
+ struct nxpwifi_adapter *adapter = priv->adapter;
+ int ret = 0;
+ struct rxpd *local_rx_pd;
+ struct rx_packet_hdr *rx_pkt_hdr;
+ u8 ta[ETH_ALEN];
+ u16 rx_pkt_type, rx_pkt_offset, rx_pkt_length, seq_num;
+
+ local_rx_pd = (struct rxpd *)(skb->data);
+ rx_pkt_type = le16_to_cpu(local_rx_pd->rx_pkt_type);
+ rx_pkt_offset = le16_to_cpu(local_rx_pd->rx_pkt_offset);
+ rx_pkt_length = le16_to_cpu(local_rx_pd->rx_pkt_length);
+ seq_num = le16_to_cpu(local_rx_pd->seq_num);
+
+ rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_offset;
+
+ if ((rx_pkt_offset + rx_pkt_length) > skb->len ||
+ sizeof(rx_pkt_hdr->eth803_hdr) + rx_pkt_offset > skb->len) {
+ nxpwifi_dbg(adapter, ERROR,
+ "wrong rx packet: len=%d, rx_pkt_offset=%d, rx_pkt_length=%d\n",
+ skb->len, rx_pkt_offset, rx_pkt_length);
+ priv->stats.rx_dropped++;
+ dev_kfree_skb_any(skb);
+ return ret;
+ }
+
+ if (rx_pkt_type == PKT_TYPE_MGMT) {
+ ret = nxpwifi_process_mgmt_packet(priv, skb);
+ if (ret && (ret != -EINPROGRESS))
+ nxpwifi_dbg(adapter, DATA, "Rx of mgmt packet failed");
+ if (ret != -EINPROGRESS)
+ dev_kfree_skb_any(skb);
+ return ret;
+ }
+
+ /* If the packet is not an unicast packet then send the packet
+ * directly to os. Don't pass thru rx reordering
+ */
+ if (!IS_11N_ENABLED(priv) ||
+ !ether_addr_equal_unaligned(priv->curr_addr,
+ rx_pkt_hdr->eth803_hdr.h_dest)) {
+ nxpwifi_process_rx_packet(priv, skb);
+ return ret;
+ }
+
+ if (nxpwifi_queuing_ra_based(priv)) {
+ memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN);
+ } else {
+ if (rx_pkt_type != PKT_TYPE_BAR &&
+ local_rx_pd->priority < MAX_NUM_TID)
+ priv->rx_seq[local_rx_pd->priority] = seq_num;
+ memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address,
+ ETH_ALEN);
+ }
+
+ /* Reorder and send to OS */
+ ret = nxpwifi_11n_rx_reorder_pkt(priv, seq_num, local_rx_pd->priority,
+ ta, (u8)rx_pkt_type, skb);
+
+ if (ret || rx_pkt_type == PKT_TYPE_BAR)
+ dev_kfree_skb_any(skb);
+
+ if (ret)
+ priv->stats.rx_dropped++;
+
+ return ret;
+}
--
2.34.1
next prev parent reply other threads:[~2024-08-09 9:47 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-09 9:44 [PATCH v2 00/43] wifi: nxpwifi: create nxpwifi to support iw61x David Lin
2024-08-09 9:44 ` [PATCH v2 01/43] wifi: nxpwifi: add 11ac.c David Lin
2024-08-09 9:44 ` [PATCH v2 02/43] wifi: nxpwifi: add 11ac.h David Lin
2024-08-09 9:44 ` [PATCH v2 03/43] wifi: nxpwifi: add 11h.c David Lin
2024-08-09 9:44 ` [PATCH v2 04/43] wifi: nxpwifi: add 11n_aggr.c David Lin
2024-08-09 9:44 ` [PATCH v2 05/43] wifi: nxpwifi: add 11n_aggr.h David Lin
2024-08-09 9:44 ` [PATCH v2 06/43] wifi: nxpwifi: add 11n.c David Lin
2024-08-09 9:44 ` [PATCH v2 07/43] wifi: nxpwifi: add 11n.h David Lin
2024-08-09 9:44 ` [PATCH v2 08/43] wifi: nxpwifi: add 11n_rxreorder.c David Lin
2024-08-09 9:44 ` [PATCH v2 09/43] wifi: nxpwifi: add 11n_rxreorder.h David Lin
2024-08-09 9:45 ` [PATCH v2 10/43] wifi: nxpwifi: add cfg80211.c David Lin
2024-08-09 9:45 ` [PATCH v2 11/43] wifi: nxpwifi: add cfg80211.h David Lin
2024-08-09 9:45 ` [PATCH v2 12/43] wifi: nxpwifi: add cfg.h David Lin
2024-08-09 9:45 ` [PATCH v2 13/43] wifi: nxpwifi: add cfp.c David Lin
2024-08-09 9:45 ` [PATCH v2 14/43] wifi: nxpwifi: add cmdevt.c David Lin
2024-08-09 9:45 ` [PATCH v2 15/43] wifi: nxpwifi: add cmdevt.h David Lin
2024-08-09 9:45 ` [PATCH v2 16/43] wifi: nxpwifi: add debugfs.c David Lin
2024-08-09 9:45 ` [PATCH v2 17/43] wifi: nxpwifi: add decl.h David Lin
2024-08-09 9:45 ` [PATCH v2 18/43] wifi: nxpwifi: add ethtool.c David Lin
2024-08-09 9:45 ` [PATCH v2 19/43] wifi: nxpwifi: add fw.h David Lin
2024-08-09 9:45 ` [PATCH v2 20/43] wifi: nxpwifi: add ie.c David Lin
2024-08-09 9:45 ` [PATCH v2 21/43] wifi: nxpwifi: add init.c David Lin
2024-08-09 9:45 ` [PATCH v2 22/43] wifi: nxpwifi: add join.c David Lin
2024-08-09 9:45 ` [PATCH v2 23/43] wifi: nxpwifi: add main.c David Lin
2024-08-09 9:45 ` [PATCH v2 24/43] wifi: nxpwifi: add main.h David Lin
2024-08-09 9:45 ` [PATCH v2 25/43] wifi: nxpwifi: add scan.c David Lin
2024-08-09 9:45 ` [PATCH v2 26/43] wifi: nxpwifi: add sdio.c David Lin
2024-08-09 9:45 ` [PATCH v2 27/43] wifi: nxpwifi: add sdio.h David Lin
2024-08-09 9:45 ` [PATCH v2 28/43] wifi: nxpwifi: add sta_cfg.c David Lin
2024-08-09 9:45 ` [PATCH v2 29/43] wifi: nxpwifi: add sta_cmd.c David Lin
2024-08-09 9:45 ` [PATCH v2 30/43] wifi: nxpwifi: add sta_event.c David Lin
2024-08-09 9:45 ` David Lin [this message]
2024-08-09 9:45 ` [PATCH v2 32/43] wifi: nxpwifi: add sta_tx.c David Lin
2024-08-09 9:45 ` [PATCH v2 33/43] wifi: nxpwifi: add txrx.c David Lin
2024-08-09 9:45 ` [PATCH v2 34/43] wifi: nxpwifi: add uap_cmd.c David Lin
2024-08-09 9:45 ` [PATCH v2 35/43] wifi: nxpwifi: add uap_event.c David Lin
2024-08-09 9:45 ` [PATCH v2 36/43] wifi: nxpwifi: add uap_txrx.c David Lin
2024-08-09 9:45 ` [PATCH v2 37/43] wifi: nxpwifi: add util.c David Lin
2024-08-09 9:45 ` [PATCH v2 38/43] wifi: nxpwifi: add util.h David Lin
2024-08-09 9:45 ` [PATCH v2 39/43] wifi: nxpwifi: add wmm.c David Lin
2024-08-09 9:45 ` [PATCH v2 40/43] wifi: nxpwifi: add wmm.h David Lin
2024-08-14 18:48 ` Greg KH
2024-08-15 1:52 ` [EXT] " David Lin
2024-08-15 5:08 ` Greg KH
2024-08-15 6:20 ` David Lin
2024-08-15 6:23 ` David Lin
2024-08-15 6:57 ` Greg KH
2024-08-15 9:51 ` Kalle Valo
2024-08-16 1:39 ` David Lin
2024-08-15 9:43 ` Kalle Valo
2024-08-15 9:58 ` Greg KH
2024-08-15 11:44 ` Kalle Valo
2024-08-09 9:45 ` [PATCH v2 41/43] wifi: nxpwifi: add nxp sdio vendor id and iw61x device id David Lin
2024-08-09 9:45 ` [PATCH v2 42/43] wifi: nxpwifi: add Makefile and Kconfig files for nxpwifi compilation David Lin
2024-08-09 9:45 ` [PATCH v2 43/43] wifi: nxpwifi: add nxpwifi related information to MAINTAINERS David Lin
2024-08-14 3:47 ` [PATCH v2 00/43] wifi: nxpwifi: create nxpwifi to support iw61x David Lin
2024-08-15 9:35 ` Kalle Valo
2024-08-16 5:32 ` [EXT] " David Lin
2024-08-22 12:56 ` Sascha Hauer
2024-08-24 13:48 ` Francesco Dolcini
2024-08-26 2:30 ` [EXT] " David Lin
2024-08-26 7:43 ` Sascha Hauer
2024-08-25 20:37 ` Calvin Owens
2024-08-26 2:33 ` [EXT] " David Lin
2024-08-26 2:49 ` Calvin Owens
2024-08-26 2:56 ` David Lin
2024-08-26 5:30 ` Calvin Owens
2024-08-26 5:49 ` David Lin
2024-10-17 7:48 ` Kalle Valo
2024-12-11 3:52 ` [EXT] " David Lin
2025-01-10 5:31 ` Jeff Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240809094533.1660-32-yu-hao.lin@nxp.com \
--to=yu-hao.lin@nxp.com \
--cc=briannorris@chromium.org \
--cc=francesco@dolcini.it \
--cc=johannes@sipsolutions.net \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=tsung-hsien.hsieh@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®