From: Frank Li <Frank.Li@nxp.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
linux-kernel@vger.kernel.org (open list:NXP PTN5150A CC LOGIC
AND EXTCON DRIVER),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS)
Cc: imx@lists.linux.dev
Subject: [PATCH 1/1] dt-bindings: extcon: ptn5150: add child node port
Date: Tue, 13 Aug 2024 00:33:53 -0400 [thread overview]
Message-ID: <20240813043353.3853595-1-Frank.Li@nxp.com> (raw)
Add child node 'port' to allow connect to usb controller to do role-switch.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index d5cfa32ea52dd..28c34d78708cb 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -37,6 +37,11 @@ properties:
GPIO pin (output) used to control VBUS. If skipped, no such control
takes place.
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the usb controller for the dual role switch.
+
required:
- compatible
- interrupts
--
2.34.1
next reply other threads:[~2024-08-13 4:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-13 4:33 Frank Li [this message]
2024-08-13 4:38 ` Frank Li
-- strict thread matches above, loose matches on Subject: below --
2024-08-12 23:18 Frank Li
2024-08-13 5:39 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240813043353.3853595-1-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®