mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ye Zhang <ye.zhang@rock-chips.com>
To: linus.walleij@linaro.org, brgl@bgdev.pl, heiko@sntech.de,
	linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	tao.huang@rock-chips.com, finley.xiao@rock-chips.com,
	tim.chen@rock-chips.com, elaine.zhang@rock-chips.com,
	Ye Zhang <ye.zhang@rock-chips.com>
Subject: [PATCH v1 5/5] rockchip: gpio: fix debounce config error
Date: Thu, 15 Aug 2024 15:16:51 +0800	[thread overview]
Message-ID: <20240815071651.3645949-6-ye.zhang@rock-chips.com> (raw)
In-Reply-To: <20240815071651.3645949-1-ye.zhang@rock-chips.com>

1. Prevent data from crossing boundaries
2. Support GPIO_TYPE_V2_2 debounce config
3. fix rockchip_gpio_set_config

Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
---
 drivers/gpio/gpio-rockchip.c | 42 ++++++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 16 deletions(-)

diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
index 03e949b0a344..186d8c750fce 100644
--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -84,7 +84,7 @@ static inline void rockchip_gpio_writel(struct rockchip_pin_bank *bank,
 {
 	void __iomem *reg = bank->reg_base + offset;
 
-	if (bank->gpio_type == GPIO_TYPE_V2)
+	if (bank->gpio_type >= GPIO_TYPE_V2)
 		gpio_writel_v2(value, reg);
 	else
 		writel(value, reg);
@@ -96,7 +96,7 @@ static inline u32 rockchip_gpio_readl(struct rockchip_pin_bank *bank,
 	void __iomem *reg = bank->reg_base + offset;
 	u32 value;
 
-	if (bank->gpio_type == GPIO_TYPE_V2)
+	if (bank->gpio_type >= GPIO_TYPE_V2)
 		value = gpio_readl_v2(reg);
 	else
 		value = readl(reg);
@@ -111,7 +111,7 @@ static inline void rockchip_gpio_writel_bit(struct rockchip_pin_bank *bank,
 	void __iomem *reg = bank->reg_base + offset;
 	u32 data;
 
-	if (bank->gpio_type == GPIO_TYPE_V2) {
+	if (bank->gpio_type >= GPIO_TYPE_V2) {
 		if (value)
 			data = BIT(bit % 16) | BIT(bit % 16 + 16);
 		else
@@ -132,7 +132,7 @@ static inline u32 rockchip_gpio_readl_bit(struct rockchip_pin_bank *bank,
 	void __iomem *reg = bank->reg_base + offset;
 	u32 data;
 
-	if (bank->gpio_type == GPIO_TYPE_V2) {
+	if (bank->gpio_type >= GPIO_TYPE_V2) {
 		data = readl(bit >= 16 ? reg + 0x4 : reg);
 		data >>= bit % 16;
 	} else {
@@ -209,19 +209,25 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc,
 	unsigned int cur_div_reg;
 	u64 div;
 
-	if (bank->gpio_type == GPIO_TYPE_V2 && !IS_ERR(bank->db_clk)) {
-		div_debounce_support = true;
+	div_debounce_support = (bank->gpio_type >= GPIO_TYPE_V2) && !IS_ERR(bank->db_clk);
+	if (debounce && div_debounce_support) {
 		freq = clk_get_rate(bank->db_clk);
 		if (!freq)
 			return -EINVAL;
-		max_debounce = (GENMASK(23, 0) + 1) * 2 * 1000000 / freq;
+
+		div = (u64)(GENMASK(23, 0) + 1) * 1000000;
+		if (bank->gpio_type == GPIO_TYPE_V2)
+			max_debounce = DIV_ROUND_CLOSEST_ULL(div, freq);
+		else
+			max_debounce = DIV_ROUND_CLOSEST_ULL(div, 2 * freq);
 		if ((unsigned long)debounce > max_debounce)
 			return -EINVAL;
 
-		div = debounce * freq;
-		div_reg = DIV_ROUND_CLOSEST_ULL(div, 2 * USEC_PER_SEC) - 1;
-	} else {
-		div_debounce_support = false;
+		div = (u64)debounce * freq;
+		if (bank->gpio_type == GPIO_TYPE_V2)
+			div_reg = DIV_ROUND_CLOSEST_ULL(div, USEC_PER_SEC) - 1;
+		else
+			div_reg = DIV_ROUND_CLOSEST_ULL(div, USEC_PER_SEC / 2) - 1;
 	}
 
 	raw_spin_lock_irqsave(&bank->slock, flags);
@@ -284,10 +290,11 @@ static int rockchip_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
 				  unsigned long config)
 {
 	enum pin_config_param param = pinconf_to_config_param(config);
+	unsigned int debounce = pinconf_to_config_argument(config);
 
 	switch (param) {
 	case PIN_CONFIG_INPUT_DEBOUNCE:
-		rockchip_gpio_set_debounce(gc, offset, true);
+		rockchip_gpio_set_debounce(gc, offset, debounce);
 		/*
 		 * Rockchip's gpio could only support up to one period
 		 * of the debounce clock(pclk), which is far away from
@@ -416,7 +423,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	polarity = rockchip_gpio_readl(bank, bank->gpio_regs->int_polarity);
 
 	if (type == IRQ_TYPE_EDGE_BOTH) {
-		if (bank->gpio_type == GPIO_TYPE_V2) {
+		if (bank->gpio_type >= GPIO_TYPE_V2) {
 			rockchip_gpio_writel_bit(bank, d->hwirq, 1,
 						 bank->gpio_regs->int_bothedge);
 			goto out;
@@ -435,7 +442,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 				polarity |= mask;
 		}
 	} else {
-		if (bank->gpio_type == GPIO_TYPE_V2) {
+		if (bank->gpio_type >= GPIO_TYPE_V2) {
 			rockchip_gpio_writel_bit(bank, d->hwirq, 0,
 						 bank->gpio_regs->int_bothedge);
 		} else {
@@ -543,7 +550,7 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank)
 	}
 
 	gc = irq_get_domain_generic_chip(bank->domain, 0);
-	if (bank->gpio_type == GPIO_TYPE_V2) {
+	if (bank->gpio_type >= GPIO_TYPE_V2) {
 		gc->reg_writel = gpio_writel_v2;
 		gc->reg_readl = gpio_readl_v2;
 	}
@@ -632,10 +639,13 @@ static void rockchip_gpio_get_ver(struct rockchip_pin_bank *bank)
 	switch (id) {
 	case GPIO_TYPE_V2:
 	case GPIO_TYPE_V2_1:
-	case GPIO_TYPE_V2_2:
 		bank->gpio_regs = &gpio_regs_v2;
 		bank->gpio_type = GPIO_TYPE_V2;
 		break;
+	case GPIO_TYPE_V2_2:
+		bank->gpio_regs = &gpio_regs_v2;
+		bank->gpio_type = GPIO_TYPE_V2_2;
+		break;
 	default:
 		bank->gpio_regs = &gpio_regs_v1;
 		bank->gpio_type = GPIO_TYPE_V1;
-- 
2.34.1


  parent reply	other threads:[~2024-08-15  7:27 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-15  7:16 [PATCH v1 0/5] gpio: rockchip: Update the GPIO driver Ye Zhang
2024-08-15  7:16 ` [PATCH v1 1/5] gpio: rockchip: support acpi Ye Zhang
2024-08-16  9:48   ` Bartosz Golaszewski
2024-08-26  6:21   ` Dan Carpenter
2024-08-15  7:16 ` [PATCH v1 2/5] gpio: rockchip: support GPIO_TYPE_V2_2 Ye Zhang
2024-08-16  9:49   ` Bartosz Golaszewski
2024-08-15  7:16 ` [PATCH v1 3/5] gpio: rockchip: Set input direction in irq_request_resources Ye Zhang
2024-08-16  9:49   ` Bartosz Golaszewski
2024-08-15  7:16 ` [PATCH v1 4/5] gpio: rockchip: avoid division by zero Ye Zhang
2024-08-16  9:51   ` Bartosz Golaszewski
2024-08-15  7:16 ` Ye Zhang [this message]
2024-08-16 10:11   ` [PATCH v1 5/5] rockchip: gpio: fix debounce config error Bartosz Golaszewski
2024-08-16  9:46 ` [PATCH v1 0/5] gpio: rockchip: Update the GPIO driver Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240815071651.3645949-6-ye.zhang@rock-chips.com \
    --to=ye.zhang@rock-chips.com \
    --cc=brgl@bgdev.pl \
    --cc=elaine.zhang@rock-chips.com \
    --cc=finley.xiao@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=tao.huang@rock-chips.com \
    --cc=tim.chen@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®