From: Liu Ying <victor.liu@nxp.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: neil.armstrong@linaro.org, quic_jesszhan@quicinc.com,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, airlied@gmail.com, daniel@ffwll.ch,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
thierry.reding@gmail.com, sam@ravnborg.org
Subject: [PATCH 2/2] drm/panel: simple: Add ON Tat Industrial Company KD50G21-40NT-A1 panel
Date: Fri, 16 Aug 2024 16:50:04 +0800 [thread overview]
Message-ID: <20240816085004.491494-3-victor.liu@nxp.com> (raw)
In-Reply-To: <20240816085004.491494-1-victor.liu@nxp.com>
ON Tat Industrial Company KD50G21-40NT-A1 is a 5" WVGA LCD panel with DPI
interface.
The LCD module specification can be found at:
https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
drivers/gpu/drm/panel/panel-simple.c | 36 ++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index bf40057c5cf3..89963df80917 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3478,6 +3478,39 @@ static const struct panel_desc olimex_lcd_olinuxino_43ts = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
+static const struct display_timing ontat_kd50g21_40nt_a1_timing = {
+ .pixelclock = { 30000000, 30000000, 50000000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 1, 40, 255 },
+ .hback_porch = { 1, 40, 87 },
+ .hsync_len = { 1, 48, 87 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 1, 13, 255 },
+ .vback_porch = { 1, 29, 29 },
+ .vsync_len = { 3, 3, 31 },
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static const struct panel_desc ontat_kd50g21_40nt_a1 = {
+ .timings = &ontat_kd50g21_40nt_a1_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 108,
+ .height = 65,
+ },
+ .delay = {
+ .prepare = 147, /* 5 VSDs */
+ .enable = 147, /* 5 VSDs */
+ .disable = 88, /* 3 VSDs */
+ .unprepare = 117, /* 4 VSDs */
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
/*
* 800x480 CVT. The panel appears to be quite accepting, at least as far as
* pixel clocks, but this is the timing that was being used in the Adafruit
@@ -4837,6 +4870,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "olimex,lcd-olinuxino-43-ts",
.data = &olimex_lcd_olinuxino_43ts,
+ }, {
+ .compatible = "ontat,kd50g21-40nt-a1",
+ .data = &ontat_kd50g21_40nt_a1,
}, {
.compatible = "ontat,yx700wv03",
.data = &ontat_yx700wv03,
--
2.34.1
next prev parent reply other threads:[~2024-08-16 8:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-16 8:50 [PATCH 0/2] " Liu Ying
2024-08-16 8:50 ` [PATCH 1/2] dt-bindings: display: panel-simple: Add On Tat Industrial Company KD50G21-40NT-A1 Liu Ying
2024-08-16 9:28 ` Krzysztof Kozlowski
2024-08-16 8:50 ` Liu Ying [this message]
2024-08-19 15:37 ` [PATCH 2/2] drm/panel: simple: Add ON Tat Industrial Company KD50G21-40NT-A1 panel neil.armstrong
2024-08-19 16:03 ` [PATCH 0/2] " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240816085004.491494-3-victor.liu@nxp.com \
--to=victor.liu@nxp.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®