From: Huan Yang <link@vivo.com>
To: Vinod Koul <vkoul@kernel.org>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Sanyog Kale <sanyog.r.kale@intel.com>,
linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org
Cc: opensource.kernel@vivo.com, Huan Yang <link@vivo.com>
Subject: [PATCH] soundwire: qcom: Use devm_clk_get_enabled() helpers
Date: Tue, 20 Aug 2024 18:22:09 +0800 [thread overview]
Message-ID: <20240820102209.131512-1-link@vivo.com> (raw)
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Huan Yang <link@vivo.com>
---
drivers/soundwire/qcom.c | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index aed57002fd0e..2a57ed9464b4 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -1527,24 +1527,22 @@ static int qcom_swrm_probe(struct platform_device *pdev)
if (IS_ERR(ctrl->audio_cgcr)) {
dev_err(dev, "Failed to get cgcr reset ctrl required for SW gating\n");
ret = PTR_ERR(ctrl->audio_cgcr);
- goto err_init;
+ return ret;
}
}
ctrl->irq = of_irq_get(dev->of_node, 0);
if (ctrl->irq < 0) {
ret = ctrl->irq;
- goto err_init;
+ return ret;
}
- ctrl->hclk = devm_clk_get(dev, "iface");
+ ctrl->hclk = devm_clk_get_enabled(dev, "iface");
if (IS_ERR(ctrl->hclk)) {
ret = dev_err_probe(dev, PTR_ERR(ctrl->hclk), "unable to get iface clock\n");
- goto err_init;
+ return ret;
}
- clk_prepare_enable(ctrl->hclk);
-
ctrl->dev = dev;
dev_set_drvdata(&pdev->dev, ctrl);
mutex_init(&ctrl->port_lock);
@@ -1558,7 +1556,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
ret = qcom_swrm_get_port_config(ctrl);
if (ret)
- goto err_clk;
+ return ret;
params = &ctrl->bus.params;
params->max_dr_freq = DEFAULT_CLK_FREQ;
@@ -1586,7 +1584,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
"soundwire", ctrl);
if (ret) {
dev_err(dev, "Failed to request soundwire irq\n");
- goto err_clk;
+ return ret;
}
ctrl->wake_irq = of_irq_get(dev->of_node, 1);
@@ -1597,7 +1595,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
"swr_wake_irq", ctrl);
if (ret) {
dev_err(dev, "Failed to request soundwire wake irq\n");
- goto err_init;
+ return ret;
}
}
@@ -1612,7 +1610,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "Failed to register Soundwire controller (%d)\n",
ret);
- goto err_clk;
+ return ret;
}
qcom_swrm_init(ctrl);
@@ -1642,9 +1640,6 @@ static int qcom_swrm_probe(struct platform_device *pdev)
err_master_add:
sdw_bus_master_delete(&ctrl->bus);
-err_clk:
- clk_disable_unprepare(ctrl->hclk);
-err_init:
return ret;
}
@@ -1653,7 +1648,6 @@ static void qcom_swrm_remove(struct platform_device *pdev)
struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
sdw_bus_master_delete(&ctrl->bus);
- clk_disable_unprepare(ctrl->hclk);
}
static int __maybe_unused swrm_runtime_resume(struct device *dev)
--
2.45.2
reply other threads:[~2024-08-20 10:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240820102209.131512-1-link@vivo.com \
--to=link@vivo.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=opensource.kernel@vivo.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=sanyog.r.kale@intel.com \
--cc=vkoul@kernel.org \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®