From: Frank Li <Frank.Li@nxp.com>
To: Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>, Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sebastian Reichel <sre@kernel.org>,
alsa-devel@alsa-project.org (moderated list:TEXAS INSTRUMENTS
AUDIO (ASoC/HDA) DRIVERS),
linux-sound@vger.kernel.org (open list:SOUND - SOC LAYER /
DYNAMIC AUDIO POWER MANAGEM...),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH v2 1/1] ASoC: dt-bindings: Convert tpa6130a2.txt to yaml
Date: Tue, 20 Aug 2024 14:46:03 -0400 [thread overview]
Message-ID: <20240820184604.499017-1-Frank.Li@nxp.com> (raw)
Convert binding doc tpa6130a2.txt to yaml format.
Additional change:
- add ref to dai-common.yaml
- add i2c node in example
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a20000/amp@60:
failed to match any schema with compatible: ['ti,tpa6130a2']
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
- fix MAINTAINERS
---
.../bindings/sound/ti,tpa6130a2.yaml | 55 +++++++++++++++++++
.../devicetree/bindings/sound/tpa6130a2.txt | 27 ---------
MAINTAINERS | 2 +-
3 files changed, 56 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/tpa6130a2.txt
diff --git a/Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml b/Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml
new file mode 100644
index 0000000000000..a42bf9bde6940
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tpa6130a2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - tpa6130a2 Codec module
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description:
+ Stereo, analog input headphone amplifier
+
+properties:
+ compatible:
+ enum:
+ - ti,tpa6130a2
+ - ti,tpa6140a2
+
+ reg:
+ maxItems: 1
+
+ Vdd-supply:
+ description: power supply regulator
+
+ power-gpio:
+ description: gpio pin to power the device
+
+required:
+ - compatible
+ - reg
+ - Vdd-supply
+
+allOf:
+ - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ amplifier@60 {
+ compatible = "ti,tpa6130a2";
+ reg = <0x60>;
+ Vdd-supply = <&vmmc2>;
+ power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/sound/tpa6130a2.txt b/Documentation/devicetree/bindings/sound/tpa6130a2.txt
deleted file mode 100644
index 6dfa740e4b2d8..0000000000000
--- a/Documentation/devicetree/bindings/sound/tpa6130a2.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Texas Instruments - tpa6130a2 Codec module
-
-The tpa6130a2 serial control bus communicates through I2C protocols
-
-Required properties:
-
-- compatible - "string" - One of:
- "ti,tpa6130a2" - TPA6130A2
- "ti,tpa6140a2" - TPA6140A2
-
-
-- reg - <int> - I2C slave address
-
-- Vdd-supply - <phandle> - power supply regulator
-
-Optional properties:
-
-- power-gpio - gpio pin to power the device
-
-Example:
-
-tpa6130a2: tpa6130a2@60 {
- compatible = "ti,tpa6130a2";
- reg = <0x60>;
- Vdd-supply = <&vmmc2>;
- power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 118d9cf64e9cb..4ced49519930b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22713,12 +22713,12 @@ F: Documentation/devicetree/bindings/sound/tas2552.txt
F: Documentation/devicetree/bindings/sound/ti,tas2562.yaml
F: Documentation/devicetree/bindings/sound/ti,tas2770.yaml
F: Documentation/devicetree/bindings/sound/ti,tas27xx.yaml
+F: Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml
F: Documentation/devicetree/bindings/sound/ti,pcm1681.yaml
F: Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml
F: Documentation/devicetree/bindings/sound/ti,tlv320*.yaml
F: Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml
F: Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
-F: Documentation/devicetree/bindings/sound/tpa6130a2.txt
F: include/sound/tas2*.h
F: include/sound/tlv320*.h
F: include/sound/tpa6130a2-plat.h
--
2.34.1
next reply other threads:[~2024-08-20 18:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-20 18:46 Frank Li [this message]
2024-08-20 20:44 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240820184604.499017-1-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=alsa-devel@alsa-project.org \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=kevin-lu@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®