[PATCH net-next v5 1/2] net: phy: Optimize phy speed mask to be compatible to yt8821

[Frank Sae <Frank.Sae@motor-comm.com>]

yt8521 and yt8531s as Gigabit transceiver use bit15:14(bit9 reserved
default 0) as phy speed mask, yt8821 as 2.5G transceiver uses bit9 bit15:14
as phy speed mask.

Be compatible to yt8821, reform phy speed mask and phy speed macro.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
---
 drivers/net/phy/motorcomm.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 7a11fdb687cc..fe0aabe12622 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -46,12 +46,10 @@
 
 /* Specific Status Register */
 #define YTPHY_SPECIFIC_STATUS_REG		0x11
-#define YTPHY_SSR_SPEED_MODE_OFFSET		14
-
-#define YTPHY_SSR_SPEED_MODE_MASK		(BIT(15) | BIT(14))
-#define YTPHY_SSR_SPEED_10M			0x0
-#define YTPHY_SSR_SPEED_100M			0x1
-#define YTPHY_SSR_SPEED_1000M			0x2
+#define YTPHY_SSR_SPEED_MASK			((0x3 << 14) | BIT(9))
+#define YTPHY_SSR_SPEED_10M			((0x0 << 14))
+#define YTPHY_SSR_SPEED_100M			((0x1 << 14))
+#define YTPHY_SSR_SPEED_1000M			((0x2 << 14))
 #define YTPHY_SSR_DUPLEX_OFFSET			13
 #define YTPHY_SSR_DUPLEX			BIT(13)
 #define YTPHY_SSR_PAGE_RECEIVED			BIT(12)
@@ -1187,8 +1185,7 @@ static int yt8521_adjust_status(struct phy_device *phydev, int status,
 	else
 		duplex = DUPLEX_FULL;	/* for fiber, it always DUPLEX_FULL */
 
-	speed_mode = (status & YTPHY_SSR_SPEED_MODE_MASK) >>
-		     YTPHY_SSR_SPEED_MODE_OFFSET;
+	speed_mode = status & YTPHY_SSR_SPEED_MASK;
 
 	switch (speed_mode) {
 	case YTPHY_SSR_SPEED_10M:
-- 
2.34.1