From: Yixun Lan <dlan@gentoo.org>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Conor Dooley <conor@kernel.org>
Cc: Yangyu Chen <cyy@cyyself.name>,
Jisheng Zhang <jszhang@kernel.org>,
Inochi Amaoto <inochiama@outlook.com>,
Icenowy Zheng <uwu@icenowy.me>,
Meng Zhang <zhangmeng.kevin@spacemit.com>,
Meng Zhang <kevin.z.m@hotmail.com>,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Yixun Lan <dlan@gentoo.org>
Subject: [PATCH v4 0/3] riscv: spacemit: add pinctrl support to K1 SoC
Date: Tue, 03 Sep 2024 12:26:43 +0000 [thread overview]
Message-ID: <20240903-02-k1-pinctrl-v4-0-d76c00a33b2b@gentoo.org> (raw)
This series adds pinctrl support to SpacemiT's K1 SoC, the controller
uses a single register to describe all pin functions, including
bias pull up/down, drive strength, schmitter trigger, slew rate,
strong pull-up, mux mode. In patch #3, we add the pinctrl property of
uart device for the Bananapi-F3 board.
You can find the pinctrl docs of K1 here[1], and the original vendor's
pinctrl dts data here[2].
Note, we rewrite this series as an independent pinctrl driver for K1 SoC,
which means it does not use pinctrl-single driver as the model anymore,
see the suggestion from Krzysztof at [3].
Link: https://developer.spacemit.com/documentation?token=An1vwTwKaigaXRkYfwmcznTXned [1]
Link: https://gitee.com/bianbu-linux/linux-6.1/blob/bl-v1.0.y/arch/riscv/boot/dts/spacemit/k1-x_pinctrl.dtsi [2]
Link: https://lore.kernel.org/all/b7a01cba-9f68-4a6f-9795-b9103ee81d8b@kernel.org/ [3]
Signed-off-by: Yixun Lan <dlan@gentoo.org>
---
Changes in v4:
- squash dts patch (drop patch #3)
- collect review tags
- Patch #2
- fix pin id mapping
- improve pinconf debugfs
- Link to v3: https://lore.kernel.org/r/20240828-02-k1-pinctrl-v3-0-1fed6a22be98@gentoo.org
Changes in v3:
- dt-bindings: drop vendor specific properties, fix format
- rework pinctrl's gpio request function
- fix logic of slew rate & drive strength
- add power-source check
- improve debugfs info
- Link to v2: https://lore.kernel.org/r/20240825-02-k1-pinctrl-v2-0-ddd38a345d12@gentoo.org
Changes in v2:
- drop using pinctrl-single driver for K1
- rewite as independent pinctrl driver
- rebase to v6.11-rc5
- Link to v1: https://lore.kernel.org/r/20240719-02-k1-pinctrl-v1-0-239ac5b77dd6@gentoo.org
---
Yixun Lan (3):
dt-bindings: pinctrl: spacemit: add support for K1 SoC
pinctrl: spacemit: add support for SpacemiT K1 SoC
riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
.../bindings/pinctrl/spacemit,k1-pinctrl.yaml | 124 +++
arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 3 +
arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi | 20 +
arch/riscv/boot/dts/spacemit/k1.dtsi | 5 +
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/spacemit/Kconfig | 17 +
drivers/pinctrl/spacemit/Makefile | 3 +
drivers/pinctrl/spacemit/pinctrl-k1.c | 1078 ++++++++++++++++++++
drivers/pinctrl/spacemit/pinctrl-k1.h | 40 +
10 files changed, 1292 insertions(+)
---
base-commit: 431c1646e1f86b949fa3685efc50b660a364c2b6
change-id: 20240708-02-k1-pinctrl-3a2b0ec13101
prerequisite-change-id: 20240626-k1-01-basic-dt-1aa31eeebcd2:v5
prerequisite-patch-id: 47dcf6861f7d434d25855b379e6d7ef4ce369c9c
prerequisite-patch-id: 77787fe82911923aff15ccf565e8fa451538c3a6
prerequisite-patch-id: b0bdb1742d96c5738f05262c3b0059102761390b
prerequisite-patch-id: 3927d39d8d77e35d5bfe53d9950da574ff8f2054
prerequisite-patch-id: a98039136a4796252a6029e474f03906f2541643
prerequisite-patch-id: c95f6dc0547a2a63a76e3cba0cf5c623b212b4e6
prerequisite-patch-id: 66e750e438ee959ddc2a6f0650814a2d8c989139
prerequisite-patch-id: 29a0fd8c36c1a4340f0d0b68a4c34d2b8abfb1ab
prerequisite-patch-id: 0bdfff661c33c380d1cf00a6c68688e05f88c0b3
prerequisite-patch-id: 99f15718e0bfbb7ed1a96dfa19f35841b004dae9
Best regards,
--
Yixun Lan <dlan@gentoo.org>
next reply other threads:[~2024-09-03 12:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-03 12:26 Yixun Lan [this message]
2024-09-03 12:26 ` [PATCH v4 1/3] dt-bindings: pinctrl: spacemit: add support for " Yixun Lan
2024-09-03 12:26 ` [PATCH v4 2/3] pinctrl: spacemit: add support for SpacemiT " Yixun Lan
2024-09-23 8:58 ` Linus Walleij
2024-09-25 2:30 ` Yixun Lan
2024-09-03 12:26 ` [PATCH v4 3/3] riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3 Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240903-02-k1-pinctrl-v4-0-d76c00a33b2b@gentoo.org \
--to=dlan@gentoo.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=cyy@cyyself.name \
--cc=devicetree@vger.kernel.org \
--cc=inochiama@outlook.com \
--cc=jszhang@kernel.org \
--cc=kevin.z.m@hotmail.com \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=uwu@icenowy.me \
--cc=zhangmeng.kevin@spacemit.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®