[PATCH v2 1/2] vdpa/mlx5: Set speed and duplex of vDPA devices to UNKNOWN

[Carlos Bilbao <carlos.bilbao.osdev@gmail.com>]

From: Carlos Bilbao <cbilbao@digitalocean.com>

Initialize the speed and duplex fields in virtio_net_config to UNKNOWN.
This is needed because mlx5_vdpa vDPA devicess currently do not support the
VIRTIO_NET_F_SPEED_DUPLEX feature which reports speed and duplex. Add
needed helper cpu_to_mlx5vdpa32() to convert endianness of speed.

Signed-off-by: Carlos Bilbao <cbilbao@digitalocean.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index b56aae3f7be3..5fce6d62af4f 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -173,6 +173,11 @@ static __virtio16 cpu_to_mlx5vdpa16(struct mlx5_vdpa_dev *mvdev, u16 val)
 	return __cpu_to_virtio16(mlx5_vdpa_is_little_endian(mvdev), val);
 }
 
+static __virtio32 cpu_to_mlx5vdpa32(struct mlx5_vdpa_dev *mvdev, u32 val)
+{
+    return __cpu_to_virtio32(mlx5_vdpa_is_little_endian(mvdev), val);
+}
+
 static u16 ctrl_vq_idx(struct mlx5_vdpa_dev *mvdev)
 {
 	if (!(mvdev->actual_features & BIT_ULL(VIRTIO_NET_F_MQ)))
@@ -3433,6 +3438,13 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
 	init_rwsem(&ndev->reslock);
 	config = &ndev->config;
 
+	/*
+	 * mlx5_vdpa vDPA devices currently don't support reporting or
+	 * setting the speed or duplex.
+	 */
+	config->speed  = cpu_to_mlx5vdpa32(mvdev, SPEED_UNKNOWN);
+	config->duplex = DUPLEX_UNKNOWN;
+
 	if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU)) {
 		err = config_func_mtu(mdev, add_config->net.mtu);
 		if (err)
-- 
2.34.1