From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net, Michal Kubecek <mkubecek@suse.cz>
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, Andrew Lunn <andrew@lunn.ch>,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Christophe Leroy <christophe.leroy@csgroup.eu>,
Herve Codina <herve.codina@bootlin.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Oleksij Rempel <o.rempel@pengutronix.de>,
Simon Horman <horms@kernel.org>
Subject: [PATCH ethtool-next v3 1/3] update UAPI header copies
Date: Thu, 5 Sep 2024 12:24:14 +0200 [thread overview]
Message-ID: <20240905102417.232890-2-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20240905102417.232890-1-maxime.chevallier@bootlin.com>
Update to kernel commit 7d3aed652d09.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
uapi/linux/ethtool.h | 16 ++++++++++++++++
uapi/linux/ethtool_netlink.h | 25 +++++++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/uapi/linux/ethtool.h b/uapi/linux/ethtool.h
index fef07da..7022fcc 100644
--- a/uapi/linux/ethtool.h
+++ b/uapi/linux/ethtool.h
@@ -2531,4 +2531,20 @@ struct ethtool_link_settings {
* __u32 map_lp_advertising[link_mode_masks_nwords];
*/
};
+
+/**
+ * enum phy_upstream - Represents the upstream component a given PHY device
+ * is connected to, as in what is on the other end of the MII bus. Most PHYs
+ * will be attached to an Ethernet MAC controller, but in some cases, there's
+ * an intermediate PHY used as a media-converter, which will driver another
+ * MII interface as its output.
+ * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port,
+ * or ethernet controller)
+ * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter)
+ */
+enum phy_upstream {
+ PHY_UPSTREAM_MAC,
+ PHY_UPSTREAM_PHY,
+};
+
#endif /* _LINUX_ETHTOOL_H */
diff --git a/uapi/linux/ethtool_netlink.h b/uapi/linux/ethtool_netlink.h
index dfc25a0..f865c7c 100644
--- a/uapi/linux/ethtool_netlink.h
+++ b/uapi/linux/ethtool_netlink.h
@@ -58,6 +58,7 @@ enum {
ETHTOOL_MSG_MM_GET,
ETHTOOL_MSG_MM_SET,
ETHTOOL_MSG_MODULE_FW_FLASH_ACT,
+ ETHTOOL_MSG_PHY_GET,
/* add new constants above here */
__ETHTOOL_MSG_USER_CNT,
@@ -111,6 +112,8 @@ enum {
ETHTOOL_MSG_MM_GET_REPLY,
ETHTOOL_MSG_MM_NTF,
ETHTOOL_MSG_MODULE_FW_FLASH_NTF,
+ ETHTOOL_MSG_PHY_GET_REPLY,
+ ETHTOOL_MSG_PHY_NTF,
/* add new constants above here */
__ETHTOOL_MSG_KERNEL_CNT,
@@ -134,6 +137,7 @@ enum {
ETHTOOL_A_HEADER_DEV_INDEX, /* u32 */
ETHTOOL_A_HEADER_DEV_NAME, /* string */
ETHTOOL_A_HEADER_FLAGS, /* u32 - ETHTOOL_FLAG_* */
+ ETHTOOL_A_HEADER_PHY_INDEX, /* u32 */
/* add new constants above here */
__ETHTOOL_A_HEADER_CNT,
@@ -556,6 +560,10 @@ enum {
* a regular 100 Ohm cable and a part with the abnormal impedance value
*/
ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH,
+ /* TDR not possible due to high noise level */
+ ETHTOOL_A_CABLE_RESULT_CODE_NOISE,
+ /* TDR resolution not possible / out of distance */
+ ETHTOOL_A_CABLE_RESULT_CODE_RESOLUTION_NOT_POSSIBLE,
};
enum {
@@ -965,6 +973,7 @@ enum {
ETHTOOL_A_RSS_INDIR, /* binary */
ETHTOOL_A_RSS_HKEY, /* binary */
ETHTOOL_A_RSS_INPUT_XFRM, /* u32 */
+ ETHTOOL_A_RSS_START_CONTEXT, /* u32 */
__ETHTOOL_A_RSS_CNT,
ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1),
@@ -1049,6 +1058,22 @@ enum {
ETHTOOL_A_MODULE_FW_FLASH_MAX = (__ETHTOOL_A_MODULE_FW_FLASH_CNT - 1)
};
+enum {
+ ETHTOOL_A_PHY_UNSPEC,
+ ETHTOOL_A_PHY_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_PHY_INDEX, /* u32 */
+ ETHTOOL_A_PHY_DRVNAME, /* string */
+ ETHTOOL_A_PHY_NAME, /* string */
+ ETHTOOL_A_PHY_UPSTREAM_TYPE, /* u32 */
+ ETHTOOL_A_PHY_UPSTREAM_INDEX, /* u32 */
+ ETHTOOL_A_PHY_UPSTREAM_SFP_NAME, /* string */
+ ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME, /* string */
+
+ /* add new constants above here */
+ __ETHTOOL_A_PHY_CNT,
+ ETHTOOL_A_PHY_MAX = (__ETHTOOL_A_PHY_CNT - 1)
+};
+
/* generic netlink info */
#define ETHTOOL_GENL_NAME "ethtool"
#define ETHTOOL_GENL_VERSION 1
--
2.46.0
next prev parent reply other threads:[~2024-09-05 10:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-05 10:24 [PATCH ethtool-next v3 0/3] Introduce PHY listing and targeting Maxime Chevallier
2024-09-05 10:24 ` Maxime Chevallier [this message]
2024-09-05 10:24 ` [PATCH ethtool-next v3 2/3] ethtool: Allow passing a PHY index for phy-targetting commands Maxime Chevallier
2024-09-05 10:24 ` [PATCH ethtool-next v3 3/3] ethtool: Introduce a command to list PHYs Maxime Chevallier
2024-09-05 15:43 ` Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240905102417.232890-2-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=christophe.leroy@csgroup.eu \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®