From: Jonas Karlman <jonas@kwiboo.se>
To: Sebastian Fricke <sebastian.fricke@collabora.com>,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Alex Bee <knaerzche@gmail.com>,
Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Detlev Casanova <detlev.casanova@collabora.com>,
Dan Carpenter <dan.carpenter@linaro.org>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Jonas Karlman <jonas@kwiboo.se>
Subject: [PATCH v6 00/11] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support
Date: Mon, 9 Sep 2024 19:24:58 +0000 [thread overview]
Message-ID: <20240909192522.1076704-1-jonas@kwiboo.se> (raw)
This series add H.264 High 10 and 4:2:2 profile support to the Rockchip
Video Decoder driver.
Patch 1 add helpers for calculating plane bytesperline and sizeimage.
Patch 2 add two new pixelformats for semi-planer 10-bit 4:2:0/4:2:2 YUV.
Patch 3 change to use bytesperline and buffer height to configure strides.
Patch 4 change to use values from SPS/PPS control to configure the HW.
Patch 5-9 refactor code to support filtering of CAPUTRE formats based
on the image format returned from a get_image_fmt ops.
Patch 10 add final bits to support H.264 High 10 and 4:2:2 profiles.
Patch 11 add a fix for enumerated frame sizes returned to userspace.
Tested on a ROCK Pi 4 (RK3399) and Rock64 (RK3328):
v4l2-compliance 1.28.1, 64 bits, 64-bit time_t
...
Total for rkvdec device /dev/video1: 48, Succeeded: 48, Failed: 0, Warnings: 0
Running test suite JVT-FR-EXT with decoder FFmpeg-H.264-v4l2request
...
Ran 65/69 tests successfully
Running test suite JVT-AVC_V1 with decoder FFmpeg-H.264-v4l2request
...
Ran 129/135 tests successfully
Before this series:
Running test suite JVT-FR-EXT with decoder FFmpeg-H.264-v4l2request
...
Ran 44/69 tests successfully
Changes in v6:
- Change to use fmt_idx instead of j++ tucked inside a condition (Dan)
- Add patch to fix enumerated frame sizes returned to userspace (Alex)
- Fluster test score is same as v4 and v5, see [4] and [5]
Link to v5: https://lore.kernel.org/linux-media/20240618194647.742037-1-jonas@kwiboo.se/
Changes in v5:
- Drop Remove SPS validation at streaming start patch
- Move buffer align from rkvdec_fill_decoded_pixfmt to min/step_width
- Use correct profiles for V4L2_CID_MPEG_VIDEO_H264_PROFILE
- Collect r-b and t-b tags
- Fluster test score is same as v4, see [4] and [5]
Link to v4: https://lore.kernel.org/linux-media/20231105165521.3592037-1-jonas@kwiboo.se/
Changes in v4:
- Fix failed v4l2-compliance tests related to CAPTURE queue
- Rework CAPTURE format filter anv validate to use an image format
- Run fluster test suite JVT-FR-EXT [4] and JVT-AVC_V1 [5]
Link to v3: https://lore.kernel.org/linux-media/20231029183427.1781554-1-jonas@kwiboo.se/
Changes in v3:
- Drop merged patches
- Use bpp and bpp_div instead of prior misuse of block_w/block_h
- New patch to use values from SPS/PPS control to configure the HW
- New patch to remove an unnecessary call to validate sps at streaming start
- Reworked pixel format validation
Link to v2: https://lore.kernel.org/linux-media/20200706215430.22859-1-jonas@kwiboo.se/
Changes in v2:
- Collect r-b tags
- SPS pic width and height in mbs validation moved to rkvdec_try_ctrl
- New patch to not override output buffer sizeimage
- Reworked pixel format validation
- Only align decoded buffer instead of changing frmsize step_width
Link to v1: https://lore.kernel.org/linux-media/20200701215616.30874-1-jonas@kwiboo.se/
To fully runtime test this series you may need FFmpeg patches from [1]
and fluster patches from [2], this series is also available at [3].
[1] https://github.com/Kwiboo/FFmpeg/commits/v4l2request-2024-v2-rkvdec/
[2] https://github.com/Kwiboo/fluster/commits/ffmpeg-v4l2request-rkvdec/
[3] https://github.com/Kwiboo/linux-rockchip/commits/linuxtv-rkvdec-high-10-v6/
[4] https://gist.github.com/Kwiboo/f4ac15576b2c72887ae2bc5d58b5c865
[5] https://gist.github.com/Kwiboo/459a1c8f1dcb56e45dc7a7a29cc28adf
Regards,
Jonas
Alex Bee (1):
media: rkvdec: h264: Don't hardcode SPS/PPS parameters
Jonas Karlman (10):
media: v4l2-common: Add helpers to calculate bytesperline and
sizeimage
media: v4l2: Add NV15 and NV20 pixel formats
media: rkvdec: h264: Use bytesperline and buffer height as virstride
media: rkvdec: Extract rkvdec_fill_decoded_pixfmt into helper
media: rkvdec: Move rkvdec_reset_decoded_fmt helper
media: rkvdec: Extract decoded format enumeration into helper
media: rkvdec: Add image format concept
media: rkvdec: Add get_image_fmt ops
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Fix enumerate frame sizes
.../media/v4l/pixfmt-yuv-planar.rst | 128 ++++++++++
drivers/media/v4l2-core/v4l2-common.c | 80 +++---
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +
drivers/staging/media/rkvdec/rkvdec-h264.c | 64 +++--
drivers/staging/media/rkvdec/rkvdec.c | 239 +++++++++++++-----
drivers/staging/media/rkvdec/rkvdec.h | 18 +-
include/uapi/linux/videodev2.h | 2 +
7 files changed, 410 insertions(+), 123 deletions(-)
--
2.46.0
next reply other threads:[~2024-09-09 19:25 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-09 19:24 Jonas Karlman [this message]
2024-09-09 19:24 ` [PATCH v6 01/11] media: v4l2-common: Add helpers to calculate bytesperline and sizeimage Jonas Karlman
2024-10-25 17:20 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 02/11] media: v4l2: Add NV15 and NV20 pixel formats Jonas Karlman
2024-10-25 17:31 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 03/11] media: rkvdec: h264: Use bytesperline and buffer height as virstride Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 04/11] media: rkvdec: h264: Don't hardcode SPS/PPS parameters Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 05/11] media: rkvdec: Extract rkvdec_fill_decoded_pixfmt into helper Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 06/11] media: rkvdec: Move rkvdec_reset_decoded_fmt helper Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 07/11] media: rkvdec: Extract decoded format enumeration into helper Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 08/11] media: rkvdec: Add image format concept Jonas Karlman
2024-09-10 9:41 ` Dan Carpenter
2024-10-25 17:36 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 09/11] media: rkvdec: Add get_image_fmt ops Jonas Karlman
2024-10-25 17:38 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 10/11] media: rkvdec: h264: Support High 10 and 4:2:2 profiles Jonas Karlman
2024-10-25 17:45 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 11/11] media: rkvdec: Fix enumerate frame sizes Jonas Karlman
2024-10-25 17:46 ` Nicolas Dufresne
2024-10-03 12:23 ` [PATCH v6 00/11] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Diederik de Haas
2024-10-25 8:20 ` Jonas Karlman
2024-10-25 10:30 ` Sebastian Fricke
2024-10-25 12:54 ` Nicolas Dufresne
2024-10-25 17:47 ` Nicolas Dufresne
2024-10-25 20:13 ` Jonas Karlman
2024-11-07 15:11 ` Nicolas Dufresne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240909192522.1076704-1-jonas@kwiboo.se \
--to=jonas@kwiboo.se \
--cc=benjamin.gaignard@collabora.com \
--cc=dan.carpenter@linaro.org \
--cc=detlev.casanova@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=knaerzche@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=nicolas.dufresne@collabora.com \
--cc=sebastian.fricke@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®