From: Martyn Welch <martyn.welch@collabora.com>
To: Claudiu Manoil <claudiu.manoil@nxp.com>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: kernel@collabora.com, Martyn Welch <martyn.welch@collabora.com>,
Vadim Fedorenko <vadim.fedorenko@linux.dev>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v4] net: enetc: Replace ifdef with IS_ENABLED
Date: Thu, 12 Sep 2024 18:37:40 +0100 [thread overview]
Message-ID: <20240912173742.484549-1-martyn.welch@collabora.com> (raw)
The enetc driver uses ifdefs when checking whether
CONFIG_FSL_ENETC_PTP_CLOCK is enabled in a number of places. This works
if the driver is built-in but fails if the driver is available as a
kernel module. Replace the instances of ifdef with use of the IS_ENABLED
macro, that will evaluate as true when this feature is built as a kernel
module and follows the kernel's coding style.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
---
Changes since v1:
- Switched from preprocessor conditionals to normal C conditionals.
Changes since v2:
- Reworked enetc_ethtool.c changes to fit around changes merged in
net-next.
Changes since v3:
- Correction of SOB ordering.
- Removal of unneeded `__maybe_unused` tags.
drivers/net/ethernet/freescale/enetc/enetc.c | 22 ++++++++-----------
drivers/net/ethernet/freescale/enetc/enetc.h | 9 +++-----
.../ethernet/freescale/enetc/enetc_ethtool.c | 12 ++++++----
3 files changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 5c45f42232d3..66e3e982882a 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -977,7 +977,6 @@ static int enetc_refill_rx_ring(struct enetc_bdr *rx_ring, const int buff_cnt)
return j;
}
-#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
static void enetc_get_rx_tstamp(struct net_device *ndev,
union enetc_rx_bd *rxbd,
struct sk_buff *skb)
@@ -1001,7 +1000,6 @@ static void enetc_get_rx_tstamp(struct net_device *ndev,
shhwtstamps->hwtstamp = ns_to_ktime(tstamp);
}
}
-#endif
static void enetc_get_offloads(struct enetc_bdr *rx_ring,
union enetc_rx_bd *rxbd, struct sk_buff *skb)
@@ -1041,10 +1039,9 @@ static void enetc_get_offloads(struct enetc_bdr *rx_ring,
__vlan_hwaccel_put_tag(skb, tpid, le16_to_cpu(rxbd->r.vlan_opt));
}
-#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
- if (priv->active_offloads & ENETC_F_RX_TSTAMP)
+ if (IS_ENABLED(CONFIG_FSL_ENETC_PTP_CLOCK) &&
+ (priv->active_offloads & ENETC_F_RX_TSTAMP))
enetc_get_rx_tstamp(rx_ring->ndev, rxbd, skb);
-#endif
}
/* This gets called during the non-XDP NAPI poll cycle as well as on XDP_PASS,
@@ -2882,7 +2879,6 @@ void enetc_set_features(struct net_device *ndev, netdev_features_t features)
}
EXPORT_SYMBOL_GPL(enetc_set_features);
-#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
static int enetc_hwtstamp_set(struct net_device *ndev, struct ifreq *ifr)
{
struct enetc_ndev_priv *priv = netdev_priv(ndev);
@@ -2951,17 +2947,17 @@ static int enetc_hwtstamp_get(struct net_device *ndev, struct ifreq *ifr)
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
-#endif
int enetc_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
struct enetc_ndev_priv *priv = netdev_priv(ndev);
-#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
- if (cmd == SIOCSHWTSTAMP)
- return enetc_hwtstamp_set(ndev, rq);
- if (cmd == SIOCGHWTSTAMP)
- return enetc_hwtstamp_get(ndev, rq);
-#endif
+
+ if (IS_ENABLED(CONFIG_FSL_ENETC_PTP_CLOCK)) {
+ if (cmd == SIOCSHWTSTAMP)
+ return enetc_hwtstamp_set(ndev, rq);
+ if (cmd == SIOCGHWTSTAMP)
+ return enetc_hwtstamp_get(ndev, rq);
+ }
if (!priv->phylink)
return -EOPNOTSUPP;
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h
index a9c2ff22431c..97524dfa234c 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
@@ -184,10 +184,9 @@ static inline union enetc_rx_bd *enetc_rxbd(struct enetc_bdr *rx_ring, int i)
{
int hw_idx = i;
-#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
- if (rx_ring->ext_en)
+ if (IS_ENABLED(CONFIG_FSL_ENETC_PTP_CLOCK) && rx_ring->ext_en)
hw_idx = 2 * i;
-#endif
+
return &(((union enetc_rx_bd *)rx_ring->bd_base)[hw_idx]);
}
@@ -199,10 +198,8 @@ static inline void enetc_rxbd_next(struct enetc_bdr *rx_ring,
new_rxbd++;
-#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
- if (rx_ring->ext_en)
+ if (IS_ENABLED(CONFIG_FSL_ENETC_PTP_CLOCK) && rx_ring->ext_en)
new_rxbd++;
-#endif
if (unlikely(++new_index == rx_ring->bd_count)) {
new_rxbd = rx_ring->bd_base;
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
index 47c478e08d44..2563eb8ac7b6 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
@@ -851,7 +851,12 @@ static int enetc_get_ts_info(struct net_device *ndev,
symbol_put(enetc_phc_index);
}
-#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
+ if (!IS_ENABLED(CONFIG_FSL_ENETC_PTP_CLOCK)) {
+ info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE;
+
+ return 0;
+ }
+
info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE |
@@ -860,11 +865,10 @@ static int enetc_get_ts_info(struct net_device *ndev,
info->tx_types = (1 << HWTSTAMP_TX_OFF) |
(1 << HWTSTAMP_TX_ON) |
(1 << HWTSTAMP_TX_ONESTEP_SYNC);
+
info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
(1 << HWTSTAMP_FILTER_ALL);
-#else
- info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE;
-#endif
+
return 0;
}
--
2.45.2
next reply other threads:[~2024-09-12 17:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-12 17:37 Martyn Welch [this message]
2024-09-13 10:40 ` Simon Horman
2024-09-14 3:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240912173742.484549-1-martyn.welch@collabora.com \
--to=martyn.welch@collabora.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kernel@collabora.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vadim.fedorenko@linux.dev \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®