mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "José Expósito" <jose.exposito89@gmail.com>
To: louis.chauvet@bootlin.com
Cc: airlied@gmail.com, daniel@ffwll.ch,
	dri-devel@lists.freedesktop.org, hamohammed.sa@gmail.com,
	linux-kernel@vger.kernel.org, maarten.lankhorst@linux.intel.com,
	mairacanal@riseup.net, melissa.srw@gmail.com, mripard@kernel.org,
	rodrigosiqueiramelo@gmail.com, thomas.petazzoni@bootlin.com,
	tzimmermann@suse.de
Subject: [PATCH] drm/vkms: Remove index parameter from init_vkms_output
Date: Tue, 17 Sep 2024 18:02:16 +0200	[thread overview]
Message-ID: <20240917160216.2921-1-jose.exposito89@gmail.com> (raw)
In-Reply-To: <20240906-vkms-remove-index-v1-1-3cfedd8ccb2f@bootlin.com>

Hi Louis,

> VKMS currently supports only one CRTC, so it make no sense to have this
> index configurable. To avoid issues, replace this hardcoded index by
> drm_crtc_mask when applicable.
> 
> There is no need to manually set a crtc mask on primary and cursor plane
> as it is automatically set by drmm_crtc_alloc_with_planes.
> 
> In addition, this will remove the use of an uninitialized structure in
> vkms_add_overlay_plane. This currently works by chance because two things:
> - vkms_plane_init always set a possible_crtcs value, so the problematic
>   branch is never used;
> - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
>   always have this id.
> 
> Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
> ---
>  drivers/gpu/drm/vkms/vkms_drv.c    |  2 +-
>  drivers/gpu/drm/vkms/vkms_drv.h    |  4 ++--
>  drivers/gpu/drm/vkms/vkms_output.c | 42 +++++++++++++-------------------------
>  drivers/gpu/drm/vkms/vkms_plane.c  |  4 ++--
>  4 files changed, 19 insertions(+), 33 deletions(-)
> 
> 
> ---
> base-commit: a6bb1f77a94335de67dba12e7f52651c115b82d2
> change-id: 20240906-vkms-remove-index-3a6e04c38e02
> 
> Best regards,
> 
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> index 0c1a713b7b7b..1226a790bece 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.c
> +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> @@ -172,7 +172,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
>  	dev->mode_config.preferred_depth = 0;
>  	dev->mode_config.helper_private = &vkms_mode_config_helpers;
>  
> -	return vkms_output_init(vkmsdev, 0);
> +	return vkms_output_init(vkmsdev);
>  }
>  
>  static int vkms_create(struct vkms_config *config)
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> index 5e46ea5b96dc..dac063f11dcd 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.h
> +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> @@ -148,10 +148,10 @@ struct vkms_device {
>  int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
>  		   struct drm_plane *primary, struct drm_plane *cursor);
>  
> -int vkms_output_init(struct vkms_device *vkmsdev, int index);
> +int vkms_output_init(struct vkms_device *vkmsdev);
>  
>  struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> -				   enum drm_plane_type type, int index);
> +				   enum drm_plane_type type);
>  
>  /* CRC Support */
>  const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
> diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> index 5ce70dd946aa..a6a942b4f84f 100644
> --- a/drivers/gpu/drm/vkms/vkms_output.c
> +++ b/drivers/gpu/drm/vkms/vkms_output.c
> @@ -31,47 +31,24 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
>  	.get_modes    = vkms_conn_get_modes,
>  };
>  
> -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
> -				  struct drm_crtc *crtc)
> -{
> -	struct vkms_plane *overlay;
> -
> -	overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
> -	if (IS_ERR(overlay))
> -		return PTR_ERR(overlay);
> -
> -	if (!overlay->base.possible_crtcs)
> -		overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> -
> -	return 0;
> -}
> -
> -int vkms_output_init(struct vkms_device *vkmsdev, int index)
> +int vkms_output_init(struct vkms_device *vkmsdev)
>  {
>  	struct vkms_output *output = &vkmsdev->output;
>  	struct drm_device *dev = &vkmsdev->drm;
>  	struct drm_connector *connector = &output->connector;
>  	struct drm_encoder *encoder = &output->encoder;
>  	struct drm_crtc *crtc = &output->crtc;
> -	struct vkms_plane *primary, *cursor = NULL;
> +	struct vkms_plane *primary, *overlay, *cursor = NULL;
>  	int ret;
>  	int writeback;
>  	unsigned int n;
>  
> -	primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
> +	primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
>  	if (IS_ERR(primary))
>  		return PTR_ERR(primary);
>  
> -	if (vkmsdev->config->overlay) {
> -		for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> -			ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
> -			if (ret)
> -				return ret;
> -		}
> -	}
> -
>  	if (vkmsdev->config->cursor) {
> -		cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
> +		cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
>  		if (IS_ERR(cursor))
>  			return PTR_ERR(cursor);
>  	}
> @@ -80,6 +57,15 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
>  	if (ret)
>  		return ret;
>  
> +	if (vkmsdev->config->overlay) {
> +		for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> +			overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY);
> +			if (IS_ERR(overlay))
> +				return PTR_ERR(overlay);

At this point the CRTC is initialized and, in case of error, it
would need to be freed with drm_crtc_cleanup().

Instead of returning, you'd need to jump to "err_connector", which
would need to be renamed to something else that makes sense.

Jose

> +			overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> +		}
> +	}
> +
>  	ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
>  				 DRM_MODE_CONNECTOR_VIRTUAL);
>  	if (ret) {
> @@ -95,7 +81,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
>  		DRM_ERROR("Failed to init encoder\n");
>  		goto err_encoder;
>  	}
> -	encoder->possible_crtcs = 1;
> +	encoder->possible_crtcs = drm_crtc_mask(crtc);
>  
>  	ret = drm_connector_attach_encoder(connector, encoder);
>  	if (ret) {
> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> index e5c625ab8e3e..ad137c9a75f5 100644
> --- a/drivers/gpu/drm/vkms/vkms_plane.c
> +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs vkms_plane_helper_funcs = {
>  };
>  
>  struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> -				   enum drm_plane_type type, int index)
> +				   enum drm_plane_type type)
>  {
>  	struct drm_device *dev = &vkmsdev->drm;
>  	struct vkms_plane *plane;
>  
> -	plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,
> +	plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
>  					   &vkms_plane_funcs,
>  					   vkms_formats, ARRAY_SIZE(vkms_formats),
>  					   NULL, type, NULL);
> 

  reply	other threads:[~2024-09-17 16:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-06 16:23 Louis Chauvet
2024-09-17 16:02 ` José Expósito [this message]
2024-09-18 13:41   ` Louis Chauvet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240917160216.2921-1-jose.exposito89@gmail.com \
    --to=jose.exposito89@gmail.com \
    --cc=airlied@gmail.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hamohammed.sa@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=louis.chauvet@bootlin.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mairacanal@riseup.net \
    --cc=melissa.srw@gmail.com \
    --cc=mripard@kernel.org \
    --cc=rodrigosiqueiramelo@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®