mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dhruva Gole <d-gole@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	"Rafael J . Wysocki" <rafael@kernel.org>
Cc: <linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Dhruva Gole <d-gole@ti.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Bryan Brattlof <bb@ti.com>
Subject: [PATCH V4 3/6] arm64: dts: ti: k3-am62p: add opp frequencies
Date: Thu, 19 Sep 2024 13:58:07 +0530	[thread overview]
Message-ID: <20240919082809.174589-4-d-gole@ti.com> (raw)
In-Reply-To: <20240919082809.174589-1-d-gole@ti.com>

From: Bryan Brattlof <bb@ti.com>

One power management technique available to the Cortex-A53s is their
ability to dynamically scale their frequency across the device's
Operating Performance Points (OPP)

The OPPs available for the Cortex-A53s on the AM62Px can vary based on
the silicon variant used. The SoC variant is encoded into the
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
the OPP entries the SoC supports. A table of all these variants can be
found in its data sheet[0] for the AM62Px processor family.

Add the OPP table into the SoC's fdti file along with the syscon node to
describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
the SoC variant.

[0] https://www.ti.com/lit/ds/symlink/am62p-q1.pdf

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 .../dts/ti/k3-am62p-j722s-common-wakeup.dtsi  |  5 ++
 arch/arm64/boot/dts/ti/k3-am62p5.dtsi         | 47 +++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
index 315d0092e736..6f32135f00a5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
@@ -20,6 +20,11 @@ chipid: chipid@14 {
 			bootph-all;
 		};
 
+		opp_efuse_table: syscon@18 {
+			compatible = "ti,am62-opp-efuse-table", "syscon";
+			reg = <0x18 0x4>;
+		};
+
 		cpsw_mac_syscon: ethernet-mac-syscon@200 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x200 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
index 41f479dca455..140587d02e88 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
@@ -47,6 +47,7 @@ cpu0: cpu@0 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 135 0>;
 		};
 
@@ -62,6 +63,7 @@ cpu1: cpu@1 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 136 0>;
 		};
 
@@ -77,6 +79,7 @@ cpu2: cpu@2 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 137 0>;
 		};
 
@@ -92,10 +95,54 @@ cpu3: cpu@3 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 138 0>;
 		};
 	};
 
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&opp_efuse_table>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
+		};
+	};
+
 	l2_0: l2-cache0 {
 		compatible = "cache";
 		cache-unified;
-- 
2.34.1


  parent reply	other threads:[~2024-09-19  8:31 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-19  8:28 [PATCH V4 0/6] ti: k3-am62{a,p}x-sk: " Dhruva Gole
2024-09-19  8:28 ` [PATCH V4 1/6] arm64: dts: ti: k3-am62a: " Dhruva Gole
2024-09-19  8:28 ` [PATCH V4 2/6] arm64: dts: ti: k3-am62a7-sk: add 1.4ghz opp entry Dhruva Gole
2024-09-19  8:28 ` Dhruva Gole [this message]
2024-09-19  8:28 ` [PATCH V4 4/6] arm64: dts: ti: k3-am62p5-sk: " Dhruva Gole
2024-09-19  8:28 ` [PATCH V4 5/6] arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table syscon Dhruva Gole
2024-09-19 16:40   ` Andrew Davis
2024-09-20 10:37     ` Dhruva Gole
2024-09-19  8:28 ` [PATCH V4 6/6] cpufreq: ti-cpufreq: Update efuse/rev offsets in AM62 family Dhruva Gole
2024-10-01  6:29   ` Viresh Kumar
2024-10-01  7:52     ` Dhruva Gole

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240919082809.174589-4-d-gole@ti.com \
    --to=d-gole@ti.com \
    --cc=bb@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome