From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>,
Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v19 2/2] ARM: dts: aspeed: yosemite4: add mctp config and sensors for NIC
Date: Fri, 20 Sep 2024 15:04:49 +0800 [thread overview]
Message-ID: <20240920070449.3871705-3-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240920070449.3871705-1-Delphine_CC_Chiu@wiwynn.com>
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
- Add MCTP config for NIC and remove the unnecessary MCTP config on bus
15.
- Add eeprom for NIC.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 30 +++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 6b4efb5fbd83..621e4e970790 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -937,7 +937,6 @@ &i2c15 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
- mctp-controller;
multi-master;
bus-frequency = <400000>;
@@ -951,46 +950,73 @@ i2c-mux@72 {
reg = <0x72>;
#address-cells = <1>;
#size-cells = <0>;
- i2c-mux-idle-disconnect;
imux24: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
+ mctp-controller;
+
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
imux25: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ mctp-controller;
+
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
imux26: i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
+ mctp-controller;
+
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
imux27: i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
+ mctp-controller;
+
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
};
};
--
2.25.1
next prev parent reply other threads:[~2024-09-20 7:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-20 7:04 [PATCH v19 0/2] Add i2c-mux and eeprom devices for Meta Yosemite4 Delphine CC Chiu
2024-09-20 7:04 ` [PATCH v19 1/2] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-09-23 1:01 ` Andrew Jeffery
2024-09-26 1:42 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-20 7:04 ` Delphine CC Chiu [this message]
2024-09-23 1:02 ` [PATCH v19 2/2] ARM: dts: aspeed: yosemite4: add mctp config and sensors for NIC Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240920070449.3871705-3-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=ricky.cx.wu.wiwynn@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®