mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: linux-mips@vger.kernel.org
Cc: daniel.lezcano@linaro.org, tglx@linutronix.de,
	tsbogend@alpha.franken.de, john@phrozen.org,
	linux-kernel@vger.kernel.org, yangshiji66@outlook.com
Subject: [PATCH 1/2] clocksource: Add Ralink System Tick Counter driver
Date: Fri, 20 Sep 2024 09:53:05 +0200	[thread overview]
Message-ID: <20240920075306.704665-2-sergio.paracuellos@gmail.com> (raw)
In-Reply-To: <20240920075306.704665-1-sergio.paracuellos@gmail.com>

System Tick Counter is present on Ralink SoCs RT3352 and MT7620. This
driver has been in 'arch/mips/ralink' directory since the beggining of
Ralink architecture support. However, it can be moved into a more proper
place in 'drivers/clocksource'. Hence add it here adding also support for
compile test targets.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/clocksource/Kconfig        |  10 ++
 drivers/clocksource/Makefile       |   1 +
 drivers/clocksource/timer-ralink.c | 150 +++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/clocksource/timer-ralink.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 95dd4660b5b6..50339f4d3201 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -753,4 +753,14 @@ config EP93XX_TIMER
 	  Enables support for the Cirrus Logic timer block
 	  EP93XX.
 
+config CLKSRC_RALINK
+	bool "Ralink System Tick Counter"
+	depends on SOC_RT305X || SOC_MT7620 || COMPILE_TEST
+	default y if SOC_RT305X || SOC_MT7620
+	select CLKSRC_MMIO
+	select TIMER_OF
+	help
+	  Enables support for system tick counter present on
+	  Ralink SoCs RT3352 and MT7620.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 22743785299e..c9214afcb712 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -91,3 +91,4 @@ obj-$(CONFIG_GOLDFISH_TIMER)		+= timer-goldfish.o
 obj-$(CONFIG_GXP_TIMER)			+= timer-gxp.o
 obj-$(CONFIG_CLKSRC_LOONGSON1_PWM)	+= timer-loongson1-pwm.o
 obj-$(CONFIG_EP93XX_TIMER)		+= timer-ep93xx.o
+obj-$(CONFIG_CLKSRC_RALINK)		+= timer-ralink.o
diff --git a/drivers/clocksource/timer-ralink.c b/drivers/clocksource/timer-ralink.c
new file mode 100644
index 000000000000..6ecdb4228f76
--- /dev/null
+++ b/drivers/clocksource/timer-ralink.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ralink System Tick Counter driver present on RT3352 and MT7620 SoCs.
+ *
+ * Copyright (C) 2013 by John Crispin <john@phrozen.org>
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#define SYSTICK_FREQ		(50 * 1000)
+
+#define SYSTICK_CONFIG		0x00
+#define SYSTICK_COMPARE		0x04
+#define SYSTICK_COUNT		0x08
+
+/* route systick irq to mips irq 7 instead of the r4k-timer */
+#define CFG_EXT_STK_EN		0x2
+/* enable the counter */
+#define CFG_CNT_EN		0x1
+
+struct systick_device {
+	void __iomem *membase;
+	struct clock_event_device dev;
+	int irq_requested;
+	int freq_scale;
+};
+
+static int systick_set_oneshot(struct clock_event_device *evt);
+static int systick_shutdown(struct clock_event_device *evt);
+
+static int systick_next_event(unsigned long delta,
+			      struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+	u32 count;
+
+	sdev = container_of(evt, struct systick_device, dev);
+	count = ioread32(sdev->membase + SYSTICK_COUNT);
+	count = (count + delta) % SYSTICK_FREQ;
+	iowrite32(count, sdev->membase + SYSTICK_COMPARE);
+
+	return 0;
+}
+
+static void systick_event_handler(struct clock_event_device *dev)
+{
+	/* noting to do here */
+}
+
+static irqreturn_t systick_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *dev = (struct clock_event_device *)dev_id;
+
+	dev->event_handler(dev);
+
+	return IRQ_HANDLED;
+}
+
+static struct systick_device systick = {
+	.dev = {
+		/*
+		 * cevt-r4k uses 300, make sure systick
+		 * gets used if available
+		 */
+		.rating			= 310,
+		.features		= CLOCK_EVT_FEAT_ONESHOT,
+		.set_next_event		= systick_next_event,
+		.set_state_shutdown	= systick_shutdown,
+		.set_state_oneshot	= systick_set_oneshot,
+		.event_handler		= systick_event_handler,
+	},
+};
+
+static int systick_shutdown(struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+
+	sdev = container_of(evt, struct systick_device, dev);
+
+	if (sdev->irq_requested)
+		free_irq(systick.dev.irq, &systick.dev);
+	sdev->irq_requested = 0;
+	iowrite32(0, systick.membase + SYSTICK_CONFIG);
+
+	return 0;
+}
+
+static int systick_set_oneshot(struct clock_event_device *evt)
+{
+	const char *name = systick.dev.name;
+	struct systick_device *sdev;
+	int irq = systick.dev.irq;
+
+	sdev = container_of(evt, struct systick_device, dev);
+
+	if (!sdev->irq_requested) {
+		if (request_irq(irq, systick_interrupt,
+				IRQF_PERCPU | IRQF_TIMER, name, &systick.dev))
+			pr_err("Failed to request irq %d (%s)\n", irq, name);
+	}
+	sdev->irq_requested = 1;
+	iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
+		  systick.membase + SYSTICK_CONFIG);
+
+	return 0;
+}
+
+static int __init ralink_systick_init(struct device_node *np)
+{
+	int ret;
+
+	systick.membase = of_iomap(np, 0);
+	if (!systick.membase)
+		return -ENXIO;
+
+	systick.dev.name = np->name;
+	clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+	systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+	systick.dev.max_delta_ticks = 0x7fff;
+	systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
+	systick.dev.min_delta_ticks = 0x3;
+	systick.dev.irq = irq_of_parse_and_map(np, 0);
+	if (!systick.dev.irq) {
+		pr_err("%pOFn: request_irq failed", np);
+		return -EINVAL;
+	}
+
+	ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+				    SYSTICK_FREQ, 301, 16,
+				    clocksource_mmio_readl_up);
+	if (ret)
+		return ret;
+
+	clockevents_register_device(&systick.dev);
+
+	pr_info("%pOFn: running - mult: %d, shift: %d\n",
+			np, systick.dev.mult, systick.dev.shift);
+
+	return 0;
+}
+
+TIMER_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
-- 
2.25.1


  reply	other threads:[~2024-09-20  7:53 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-20  7:53 [PATCH 0/2] clocksource: move System Tick Counter from 'arch/mips/ralink' Sergio Paracuellos
2024-09-20  7:53 ` Sergio Paracuellos [this message]
2024-10-28 16:29   ` [PATCH 1/2] clocksource: Add Ralink System Tick Counter driver Daniel Lezcano
2024-10-28 18:04     ` Sergio Paracuellos
2024-10-28 18:44       ` Daniel Lezcano
2024-10-28 19:02         ` Sergio Paracuellos
2024-10-28 19:40           ` Daniel Lezcano
2024-09-20  7:53 ` [PATCH 2/2] MIPS: ralink: remove " Sergio Paracuellos
2024-10-28 14:14 ` [PATCH 0/2] clocksource: move System Tick Counter from 'arch/mips/ralink' Sergio Paracuellos
2024-10-28 14:16   ` Daniel Lezcano
2024-10-28 14:18     ` Sergio Paracuellos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240920075306.704665-2-sergio.paracuellos@gmail.com \
    --to=sergio.paracuellos@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=john@phrozen.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    --cc=yangshiji66@outlook.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®