From: Erez Geva <erezgeva@nwtime.org>
To: linux-mtd@lists.infradead.org,
Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <mwalle@kernel.org>
Cc: linux-kernel@vger.kernel.org,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
devicetree@vger.kernel.org, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Esben Haabendal <esben@geanix.com>,
Erez Geva <ErezGeva2@gmail.com>
Subject: [PATCH v5 3/5] dt-bindings: mtd: spi-nor: add OTP parameters
Date: Fri, 20 Sep 2024 20:12:29 +0200 [thread overview]
Message-ID: <20240920181231.20542-4-erezgeva@nwtime.org> (raw)
In-Reply-To: <20240920181231.20542-1-erezgeva@nwtime.org>
From: Erez Geva <ErezGeva2@gmail.com>
Some flash devices need OTP parameters in device tree.
As we can not deduce the parameters based on JEDEC ID or SFDP.
Signed-off-by: Erez Geva <ErezGeva2@gmail.com>
---
.../bindings/mtd/jedec,spi-nor.yaml | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 6e3afb42926e..4f7bb3f41cb1 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -90,6 +90,43 @@ properties:
the SRWD bit while writing the status register. WP# signal hard strapped to GND
can be a valid use case.
+ otp-n-regions:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Some flash devices need OTP parameters in the device tree.
+ As we can not deduce the parameters based on JEDEC ID or SFDP.
+ This parameter indicates the number of OTP regions.
+ The value must be larger or equal to 1 and mandatory for OTP.
+
+ otp-len:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Some flash devices need OTP parameters in the device tree.
+ As we can not deduce the parameters based on JEDEC ID or SFDP.
+ This parameter indicates the size (length) in bytes of an OTP region.
+ Currently the driver supports symmetric OTP,
+ which means all regions must use the same size.
+ The value must be positive and mandatory for OTP.
+
+ otp-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Some flash devices need OTP parameters in the device tree.
+ As we can not deduce the parameters based on JEDEC ID or SFDP.
+ This parameter indicates the offset in bytes of
+ an OTP region relative to its previous.
+ User can omit it if the offset equals the length.
+ Or in case we have a single OTP region.
+
+ otp-base:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Some flash devices need OTP parameters in the device tree.
+ As we can not deduce the parameters based on JEDEC ID or SFDP.
+ This parameter indicates the base in bytes of the first OTP region.
+ User can omit it if the base is zero.
+ I.e. the address of the first OTP region starts from 0.
+
reset-gpios:
description:
A GPIO line connected to the RESET (active low) signal of the device.
@@ -118,6 +155,8 @@ examples:
spi-max-frequency = <40000000>;
m25p,fast-read;
reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ otp-len = <512>;
+ otp-n-regions = <1>;
};
};
...
--
2.39.5
next prev parent reply other threads:[~2024-09-20 18:13 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-20 18:12 [PATCH v5 0/5] Add support for SPI-NOR Macronix OTP Erez Geva
2024-09-20 18:12 ` [PATCH v5 1/5] mtd: spi-nor: core: add manufacturer flags Erez Geva
2024-09-23 6:04 ` Tudor Ambarus
2024-09-23 10:31 ` Erez
2024-09-23 10:46 ` Michael Walle
2024-09-23 13:25 ` Erez
2024-09-23 16:19 ` Michael Walle
2024-09-23 16:31 ` Erez
2024-09-23 18:04 ` Tudor Ambarus
2024-09-23 18:21 ` Tudor Ambarus
2024-09-26 7:46 ` Esben Haabendal
2024-09-26 11:08 ` Erez
2024-09-26 11:37 ` Esben Haabendal
2024-09-26 13:16 ` Erez
2024-09-23 12:07 ` Tudor Ambarus
2024-09-23 13:01 ` Erez
2024-09-23 14:18 ` Tudor Ambarus
2024-09-23 14:51 ` Erez
2024-09-23 17:52 ` Tudor Ambarus
2024-09-23 19:30 ` Erez
2024-09-23 21:41 ` Erez
2024-09-24 6:04 ` Tudor Ambarus
2024-09-24 6:01 ` Tudor Ambarus
2024-09-20 18:12 ` [PATCH v5 2/5] mtd: spi-nor: core: add generic functions Erez Geva
2024-09-20 18:12 ` Erez Geva [this message]
2024-09-22 20:40 ` [PATCH v5 3/5] dt-bindings: mtd: spi-nor: add OTP parameters Krzysztof Kozlowski
2024-09-23 9:21 ` Erez
2024-09-23 15:42 ` Krzysztof Kozlowski
2024-09-23 15:49 ` Erez
2024-09-20 18:12 ` [PATCH v5 4/5] mtd: spi-nor: macronix: add support for OTP Erez Geva
2024-09-20 18:12 ` [PATCH v5 5/5] mtd: spi-nor: macronix: add manufacturer flags Erez Geva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240920181231.20542-4-erezgeva@nwtime.org \
--to=erezgeva@nwtime.org \
--cc=ErezGeva2@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=esben@geanix.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=mwalle@kernel.org \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®