[PATCH] arm64: dts: rockchip: enable automatic fan control on Orange Pi 5+

[Florian Klink <flokli@flokli.de>]

This links the PWM fan on Orange Pi 5+ as an active cooling device
managed automatically by the thermal subsystem, with a target SoC
temperature of 65C and a minimum-spin interval from 55C to 65C to
ensure airflow when the system gets warm.

This is pretty much the same as '4a152231b050 ("arm64: dts: rockchip:
enable automatic fan control on Rock 5B")', except for the Orange Pi
5+ board.

Signed-off-by: Florian Klink <flokli@flokli.de>
---
 .../dts/rockchip/rk3588-orangepi-5-plus.dts   | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index e74871491ef5..8569e862b6ee 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -351,6 +351,36 @@ &i2s2m0_sdi
 	status = "okay";
 };
 
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map2 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 /* phy1 - M.KEY socket */
 &pcie2x1l0 {
 	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
-- 
2.46.0