From: Frank Li <Frank.Li@nxp.com>
To: "Rob Herring" <robh@kernel.org>,
"Saravana Kannan" <saravanak@google.com>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Richard Zhu" <hongxing.zhu@nxp.com>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
imx@lists.linux.dev, Frank Li <Frank.Li@nxp.com>
Subject: [PATCH 2/3] PCI: dwc: Using for_each_of_range_untranslate to elminate cpu_addr_fixup()
Date: Tue, 24 Sep 2024 17:54:20 -0400 [thread overview]
Message-ID: <20240924-pci_fixup_addr-v1-2-57d14a91ec4f@nxp.com> (raw)
In-Reply-To: <20240924-pci_fixup_addr-v1-0-57d14a91ec4f@nxp.com>
for_each_of_range_untranslate() can get address informaiton just ahead of
PCIe controller. Most system it is the same as CPU address, but some
hardware like i.MX8QXP convert it to difference address by bus fabric. See
below diagram:
┌─────────┐ ┌────────────┐
┌─────┐ │ │ IA: 0x8ff0_0000 │ │
│ CPU ├───►│ BUS ├─────────────────┐ │ PCI │
└─────┘ │ │ IA: 0x8ff8_0000 │ │ │
CPU Addr │ Fabric ├─────────────┐ │ │ Controller │
0x7000_0000 │ │ │ │ │ │
│ │ │ │ │ │ PCI Addr
│ │ │ └──► CfgSpace ─┼────────────►
│ ├─────────┐ │ │ │ 0
│ │ │ │ │ │
└─────────┘ │ └──────► IOSpace ─┼────────────►
│ │ │ 0
│ │ │
└──────────► MemSpace ─┼────────────►
IA: 0x8000_0000 │ │ 0x8000_0000
└────────────┘
bus@5f000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5f000000 0x0 0x5f000000 0x21000000>,
<0x80000000 0x0 0x70000000 0x10000000>;
pcie@5f010000 {
compatible = "fsl,imx8q-pcie";
reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
<0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
...
};
};
Term 'IA' here means the address just before PCIe controle. After ATU use
this IA instead CPU address, cpu_addr_fixup() can be removed.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pcie-designware-host.c | 33 +++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 3e41865c72904..68c679a2e1737 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -418,6 +418,27 @@ static void dw_pcie_host_request_msg_tlp_res(struct dw_pcie_rp *pp)
}
}
+static int dw_pcie_get_untranslate_addr(struct device_node *np, resource_size_t pci_addr,
+ resource_size_t *i_addr)
+{
+ struct of_range_parser parser;
+ struct of_range range;
+ int ret;
+
+ ret = of_range_parser_init(&parser, np);
+ if (ret)
+ return ret;
+
+ for_each_of_pci_range_untranslate(&parser, &range) {
+ if (pci_addr == range.bus_addr) {
+ *i_addr = range.cpu_addr;
+ break;
+ }
+ }
+
+ return 0;
+}
+
int dw_pcie_host_init(struct dw_pcie_rp *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -427,6 +448,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
struct resource_entry *win;
struct pci_host_bridge *bridge;
struct resource *res;
+ int index;
int ret;
raw_spin_lock_init(&pp->lock);
@@ -440,6 +462,11 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
pp->cfg0_size = resource_size(res);
pp->cfg0_base = res->start;
+ index = of_property_match_string(np, "reg-names", "config");
+ if (index < 0)
+ return -EINVAL;
+ of_property_read_reg(np, index, &pp->cfg0_base, NULL);
+
pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res);
if (IS_ERR(pp->va_cfg0_base))
return PTR_ERR(pp->va_cfg0_base);
@@ -462,6 +489,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
pp->io_base = pci_pio_to_address(win->res->start);
}
+ if (dw_pcie_get_untranslate_addr(np, pp->io_bus_addr, &pp->io_base))
+ return -ENODEV;
+
/* Set default bus ops */
bridge->ops = &dw_pcie_ops;
bridge->child_ops = &dw_child_pcie_ops;
@@ -733,6 +763,9 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
atu.cpu_addr = entry->res->start;
atu.pci_addr = entry->res->start - entry->offset;
+ if (dw_pcie_get_untranslate_addr(pci->dev->of_node, atu.pci_addr, &atu.cpu_addr))
+ return -EINVAL;
+
/* Adjust iATU size if MSG TLP region was allocated before */
if (pp->msg_res && pp->msg_res->parent == entry->res)
atu.size = resource_size(entry->res) -
--
2.34.1
next prev parent reply other threads:[~2024-09-24 21:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-24 21:54 [PATCH 0/3] PCI: dwc: opitimaze RC host pci_fixup_addr() Frank Li
2024-09-24 21:54 ` [PATCH 1/3] of: address: Add helper function to get untranslated 'ranges' information Frank Li
2024-09-26 2:26 ` Rob Herring
2024-09-26 3:21 ` Frank Li
2024-09-24 21:54 ` Frank Li [this message]
2024-09-24 21:54 ` [PATCH 3/3] PCI: imx6: Remove cpu_addr_fixup() Frank Li
2024-09-25 3:00 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240924-pci_fixup_addr-v1-2-57d14a91ec4f@nxp.com \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=jingoohan1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=saravanak@google.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®