From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: guoniu.zhou@oss.nxp.com
Cc: rmfrfs@gmail.com, martink@posteo.de, kernel@puri.sm,
mchehab@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, imx@lists.linux.dev,
linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] media: nxp: imx8mq-mipi-csi2: Fix CSI clocks always enabled issue
Date: Sun, 29 Sep 2024 15:00:51 +0300 [thread overview]
Message-ID: <20240929120051.GA31662@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20240929101635.1648234-1-guoniu.zhou@oss.nxp.com>
Hi Guoniu,
Thank you for the patch.
On Sun, Sep 29, 2024 at 06:16:35PM +0800, guoniu.zhou@oss.nxp.com wrote:
> From: "Guoniu.zhou" <guoniu.zhou@nxp.com>
>
> Fix CSI clocks always enabled issue after run system suspend/resume.
>
> The clocks for CSI will be enabled in imx8mq_mipi_csi_pm_resume()
> when system resume and the state of CSI will be set to ST_POWERED.
> It not only cause clock always enabled issue but also system hang
> issue on iMX8ULP platform since imx8mq_mipi_csi_pm_suspend() will
> access CSI registers if run system suspend/resume again, but the
> CSI power domain is not active.
>
> In order to fix this issue, using pm_runtime_force_suspend/resume
> instead of calling imx8mq_mipi_csi_pm_suspend/resume directly.
I think you can simplify suspend/resume handling in the driver by
dropping the system suspend/resume handlers. At system suspend time the
device should already be stopped, because the top-level driver (the CSI
bridge in the i.MX8MQ) should have stopped the pipeline. Similarly, at
system resume time, there should be no need to restart streaming, as the
top-level driver will control that.
I'll send a patch and CC you, could you give it a try ?
> Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
> ---
> drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> index d4a6c5532969..15029bb81b35 100644
> --- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> +++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> @@ -697,8 +697,11 @@ static int imx8mq_mipi_csi_suspend(struct device *dev)
> {
> struct v4l2_subdev *sd = dev_get_drvdata(dev);
> struct csi_state *state = mipi_sd_to_csi2_state(sd);
> + int ret;
>
> - imx8mq_mipi_csi_pm_suspend(dev);
> + ret = pm_runtime_force_suspend(dev);
> + if (ret < 0)
> + return ret;
>
> state->state |= ST_SUSPENDED;
>
> @@ -713,7 +716,7 @@ static int imx8mq_mipi_csi_resume(struct device *dev)
> if (!(state->state & ST_SUSPENDED))
> return 0;
>
> - return imx8mq_mipi_csi_pm_resume(dev);
> + return pm_runtime_force_resume(dev);
> }
>
> static int imx8mq_mipi_csi_runtime_suspend(struct device *dev)
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2024-09-29 12:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-29 10:16 guoniu.zhou
2024-09-29 12:00 ` Laurent Pinchart [this message]
2024-09-29 12:40 ` G.N. Zhou (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240929120051.GA31662@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=festevam@gmail.com \
--cc=guoniu.zhou@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®