From: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v2 1/5] pinctrl: renesas: rzg2l: Remove RZG2L_TINT_IRQ_START_INDEX
Date: Mon, 30 Sep 2024 15:52:40 +0100 [thread overview]
Message-ID: <20240930145244.356565-2-fabrizio.castro.jz@renesas.com> (raw)
In-Reply-To: <20240930145244.356565-1-fabrizio.castro.jz@renesas.com>
The RZ/V2H(P) has 16 IRQ interrupts, while every other platforms
has 8, and this affects the start index of TINT interrupts
(1 + 16 = 17, rather than 1 + 8 = 9).
Macro RZG2L_TINT_IRQ_START_INDEX cannot work anymore, replace
it with a new member within struct rzg2l_hwcfg.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
---
v1->v2:
* No change
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 5a403915fed2..0aba75dce229 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -168,7 +168,6 @@
#define RZG2L_PIN_ID_TO_PIN(id) ((id) % RZG2L_PINS_PER_PORT)
#define RZG2L_TINT_MAX_INTERRUPT 32
-#define RZG2L_TINT_IRQ_START_INDEX 9
#define RZG2L_PACK_HWIRQ(t, i) (((t) << 16) | (i))
/* Custom pinconf parameters */
@@ -251,6 +250,7 @@ enum rzg2l_iolh_index {
* @func_base: base number for port function (see register PFC)
* @oen_max_pin: the maximum pin number supporting output enable
* @oen_max_port: the maximum port number supporting output enable
+ * @tint_start_index: the start index for the TINT interrupts
*/
struct rzg2l_hwcfg {
const struct rzg2l_register_offsets regs;
@@ -262,6 +262,7 @@ struct rzg2l_hwcfg {
u8 func_base;
u8 oen_max_pin;
u8 oen_max_port;
+ unsigned int tint_start_index;
};
struct rzg2l_dedicated_configs {
@@ -2379,7 +2380,7 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
rzg2l_gpio_irq_endisable(pctrl, child, true);
pctrl->hwirq[irq] = child;
- irq += RZG2L_TINT_IRQ_START_INDEX;
+ irq += pctrl->data->hwcfg->tint_start_index;
/* All these interrupts are level high in the CPU */
*parent_type = IRQ_TYPE_LEVEL_HIGH;
@@ -3035,6 +3036,7 @@ static const struct rzg2l_hwcfg rzg2l_hwcfg = {
},
.iolh_groupb_oi = { 100, 66, 50, 33, },
.oen_max_pin = 0,
+ .tint_start_index = 9,
};
static const struct rzg2l_hwcfg rzg3s_hwcfg = {
@@ -3067,12 +3069,14 @@ static const struct rzg2l_hwcfg rzg3s_hwcfg = {
.func_base = 1,
.oen_max_pin = 1, /* Pin 1 of P0 and P7 is the maximum OEN pin. */
.oen_max_port = 7, /* P7_1 is the maximum OEN port. */
+ .tint_start_index = 9,
};
static const struct rzg2l_hwcfg rzv2h_hwcfg = {
.regs = {
.pwpr = 0x3c04,
},
+ .tint_start_index = 17,
};
static struct rzg2l_pinctrl_data r9a07g043_data = {
--
2.34.1
next prev parent reply other threads:[~2024-09-30 14:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-30 14:52 [PATCH v2 0/5] Add support for the RZ/V2H Interrupt Control Unit Fabrizio Castro
2024-09-30 14:52 ` Fabrizio Castro [this message]
2024-10-04 9:57 ` [PATCH v2 1/5] pinctrl: renesas: rzg2l: Remove RZG2L_TINT_IRQ_START_INDEX Geert Uytterhoeven
2024-10-09 8:00 ` claudiu beznea
2024-10-09 10:22 ` Geert Uytterhoeven
2024-10-09 22:00 ` Fabrizio Castro
2024-09-30 14:52 ` [PATCH v2 2/5] dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller Fabrizio Castro
2024-10-02 20:22 ` Rob Herring (Arm)
2024-10-04 10:26 ` Geert Uytterhoeven
2024-10-09 22:10 ` Fabrizio Castro
2024-09-30 14:52 ` [PATCH v2 3/5] clk: renesas: r9a09g057: Add clock and reset entries for ICU Fabrizio Castro
2024-10-04 10:05 ` Geert Uytterhoeven
2024-09-30 14:52 ` [PATCH v2 4/5] irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver Fabrizio Castro
2024-09-30 14:52 ` [PATCH v2 5/5] arm64: dts: renesas: r9a09g057: Add ICU node Fabrizio Castro
2024-10-04 10:27 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240930145244.356565-2-fabrizio.castro.jz@renesas.com \
--to=fabrizio.castro.jz@renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®