[PATCH 8/8] arm64: dts: rockchip: Add UART clocks for RK3528 SoC

[Yao Zi <ziyao@disroot.org>]

Add missing clocks in UART nodes for RK3528 SoC.

Signed-off-by: Yao Zi <ziyao@disroot.org>
---
 arch/arm64/boot/dts/rockchip/rk3528.dtsi | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index c0552ff7cd31..9c28e1d0d7ea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -166,7 +166,8 @@ cru: clock-controller@ff4a0000 {
 		uart0: serial@ff9f0000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xff9f0000 0x0 0x100>;
-			clock-frequency = <24000000>;
+			clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -176,6 +177,8 @@ uart0: serial@ff9f0000 {
 		uart1: serial@ff9f8000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xff9f8000 0x0 0x100>;
+			clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -185,6 +188,8 @@ uart1: serial@ff9f8000 {
 		uart2: serial@ffa00000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa00000 0x0 0x100>;
+			clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -193,6 +198,8 @@ uart2: serial@ffa00000 {
 
 		uart3: serial@ffa08000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
+			clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+			clock-names = "baudclk", "apb_pclk";
 			reg = <0x0 0xffa08000 0x0 0x100>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -202,6 +209,8 @@ uart3: serial@ffa08000 {
 		uart4: serial@ffa10000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa10000 0x0 0x100>;
+			clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -211,6 +220,8 @@ uart4: serial@ffa10000 {
 		uart5: serial@ffa18000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa18000 0x0 0x100>;
+			clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -220,6 +231,8 @@ uart5: serial@ffa18000 {
 		uart6: serial@ffa20000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa20000 0x0 0x100>;
+			clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -229,6 +242,8 @@ uart6: serial@ffa20000 {
 		uart7: serial@ffa28000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa28000 0x0 0x100>;
+			clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
-- 
2.46.0