From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>,
Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 04/10] ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider Board
Date: Tue, 1 Oct 2024 16:20:46 +0800 [thread overview]
Message-ID: <20241001082053.3455836-5-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20241001082053.3455836-1-Delphine_CC_Chiu@wiwynn.com>
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Add I2C mux for CPLD IOE on Spider Board.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 66 +++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index b813140b3c5b..26e0fcbed8d2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -30,6 +30,8 @@ aliases {
i2c25 = &imux25;
i2c26 = &imux26;
i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
i2c34 = &imux34;
i2c35 = &imux35;
};
@@ -773,8 +775,72 @@ eeprom@54 {
};
&i2c10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
+ i2c-mux@74 {
+ compatible = "nxp,pca9544";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ imux28: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "","","","",
+ "NIC0_MAIN_PWR_EN",
+ "NIC1_MAIN_PWR_EN",
+ "NIC2_MAIN_PWR_EN",
+ "NIC3_MAIN_PWR_EN",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
+ };
+ };
+
+ imux29: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
&i2c11 {
--
2.25.1
next prev parent reply other threads:[~2024-10-01 8:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-01 8:20 [PATCH v2 00/10] Add I2C mux devices for yosemite4 Delphine CC Chiu
2024-10-01 8:20 ` [PATCH v2 01/10] ARM: dts: aspeed: yosemite4: add i2c-mux for all Server Board slots Delphine CC Chiu
2024-10-01 8:20 ` [PATCH v2 02/10] ARM: dts: aspeed: yosemite4: Remove mctp property on I2C Bus 15 Delphine CC Chiu
2024-10-01 8:20 ` [PATCH v2 03/10] ARM: dts: aspeed: yosemite4: Add i2c-mux for four NICs Delphine CC Chiu
2024-10-01 8:20 ` Delphine CC Chiu [this message]
2024-10-01 8:20 ` [PATCH v2 05/10] ARM: dts: aspeed: yosemite4: Add required properties for IOE on fan boards Delphine CC Chiu
2024-10-01 8:20 ` [PATCH v2 06/10] ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two " Delphine CC Chiu
2024-10-01 8:20 ` [PATCH v2 07/10] ARM: dts: aspeed: yosemite4: correct the compatible string for max31790 Delphine CC Chiu
2024-10-02 1:45 ` Andrew Jeffery
2024-10-03 7:19 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-10-01 8:20 ` [PATCH v2 08/10] ARM: dts: aspeed: yosemite4: Change the address of Fan IC on fan boards Delphine CC Chiu
2024-10-01 8:20 ` [PATCH v2 09/10] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards Delphine CC Chiu
2024-10-01 8:20 ` [PATCH v2 10/10] ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241001082053.3455836-5-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=ricky.cx.wu.wiwynn@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®