From: Ravi Bangoria <ravi.bangoria@amd.com>
To: <peterz@infradead.org>, <mingo@redhat.com>, <namhyung@kernel.org>
Cc: <ravi.bangoria@amd.com>, <acme@kernel.org>, <eranian@google.com>,
<mark.rutland@arm.com>, <alexander.shishkin@linux.intel.com>,
<jolsa@kernel.org>, <irogers@google.com>,
<adrian.hunter@intel.com>, <kan.liang@linux.intel.com>,
<tglx@linutronix.de>, <bp@alien8.de>,
<dave.hansen@linux.intel.com>, <x86@kernel.org>, <hpa@zytor.com>,
<linux-perf-users@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <santosh.shukla@amd.com>,
<ananth.narayan@amd.com>, <sandipan.das@amd.com>
Subject: [PATCH 6/8] perf/amd/ibs: Add pmu specific minimum period
Date: Mon, 7 Oct 2024 03:48:08 +0000 [thread overview]
Message-ID: <20241007034810.754-7-ravi.bangoria@amd.com> (raw)
In-Reply-To: <20241007034810.754-1-ravi.bangoria@amd.com>
0x10 is the minimum sample period for IBS Fetch and 0x90 for IBS Op.
Current IBS pmu driver uses 0x10 for both the pmus, which is incorrect.
Fix it by adding pmu specific minimum period values in struct perf_ibs.
Also, bail out opening a 'sample period mode' event if the user requested
sample period is less than pmu supported minimum value. For a 'freq mode'
event, start calibrating sample period from pmu specific minimum period.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
---
arch/x86/events/amd/ibs.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 368ed839b612..e7522ba45a7e 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -83,6 +83,7 @@ struct perf_ibs {
u64 cnt_mask;
u64 enable_mask;
u64 valid_mask;
+ u16 min_period;
u64 max_period;
unsigned long offset_mask[1];
int offset_max;
@@ -295,10 +296,14 @@ static int perf_ibs_init(struct perf_event *event)
/* raw max_cnt may not be set */
return -EINVAL;
- /* Silently mask off lower nibble. IBS hw mandates it. */
- hwc->sample_period &= ~0x0FULL;
- if (!hwc->sample_period)
- hwc->sample_period = 0x10;
+ if (event->attr.freq) {
+ hwc->sample_period = perf_ibs->min_period;
+ } else {
+ /* Silently mask off lower nibble. IBS hw mandates it. */
+ hwc->sample_period &= ~0x0FULL;
+ if (hwc->sample_period < perf_ibs->min_period)
+ return -EINVAL;
+ }
} else {
u64 period = 0;
@@ -316,10 +321,10 @@ static int perf_ibs_init(struct perf_event *event)
config &= ~perf_ibs->cnt_mask;
event->attr.sample_period = period;
hwc->sample_period = period;
- }
- if (!hwc->sample_period)
- return -EINVAL;
+ if (hwc->sample_period < perf_ibs->min_period)
+ return -EINVAL;
+ }
/*
* If we modify hwc->sample_period, we also need to update
@@ -340,7 +345,8 @@ static int perf_ibs_set_period(struct perf_ibs *perf_ibs,
int overflow;
/* ignore lower 4 bits in min count: */
- overflow = perf_event_set_period(hwc, 1<<4, perf_ibs->max_period, period);
+ overflow = perf_event_set_period(hwc, perf_ibs->min_period,
+ perf_ibs->max_period, period);
local64_set(&hwc->prev_count, 0);
return overflow;
@@ -677,6 +683,7 @@ static struct perf_ibs perf_ibs_fetch = {
.cnt_mask = IBS_FETCH_MAX_CNT,
.enable_mask = IBS_FETCH_ENABLE,
.valid_mask = IBS_FETCH_VAL,
+ .min_period = 0x10,
.max_period = IBS_FETCH_MAX_CNT << 4,
.offset_mask = { MSR_AMD64_IBSFETCH_REG_MASK },
.offset_max = MSR_AMD64_IBSFETCH_REG_COUNT,
@@ -702,6 +709,7 @@ static struct perf_ibs perf_ibs_op = {
IBS_OP_CUR_CNT_RAND,
.enable_mask = IBS_OP_ENABLE,
.valid_mask = IBS_OP_VAL,
+ .min_period = 0x90,
.max_period = IBS_OP_MAX_CNT << 4,
.offset_mask = { MSR_AMD64_IBSOP_REG_MASK },
.offset_max = MSR_AMD64_IBSOP_REG_COUNT,
--
2.46.2
next prev parent reply other threads:[~2024-10-07 3:49 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-07 3:48 [PATCH 0/8] perf/amd/ibs: Fix sample period computations Ravi Bangoria
2024-10-07 3:48 ` [PATCH 1/8] perf/amd/ibs: Remove IBS_{FETCH|OP}_CONFIG_MASK macros Ravi Bangoria
2024-10-07 3:48 ` [PATCH 2/8] perf/amd/ibs: Remove pointless sample period check Ravi Bangoria
2024-10-07 19:16 ` Namhyung Kim
2024-10-07 3:48 ` [PATCH 3/8] perf/amd/ibs: Fix ->config to sample period calculation for OP pmu Ravi Bangoria
2024-10-07 3:48 ` [PATCH 4/8] perf/amd/ibs: Fix perf_ibs_op.cnt_mask for CurCnt Ravi Bangoria
2024-10-07 3:48 ` [PATCH 5/8] perf/amd/ibs: Don't allow freq mode event creation through ->config interface Ravi Bangoria
2024-10-07 19:24 ` Namhyung Kim
2024-10-08 5:30 ` Ravi Bangoria
2024-10-09 6:27 ` Namhyung Kim
2024-10-07 3:48 ` Ravi Bangoria [this message]
2024-10-07 19:30 ` [PATCH 6/8] perf/amd/ibs: Add pmu specific minimum period Namhyung Kim
2024-10-08 5:46 ` Ravi Bangoria
2024-10-09 6:32 ` Namhyung Kim
2024-10-07 3:48 ` [PATCH 7/8] perf/amd/ibs: Add ->check_period() callback Ravi Bangoria
2024-10-07 19:33 ` Namhyung Kim
2024-10-07 3:48 ` [PATCH 8/8] perf/core: Introduce pmu->adjust_period() callback Ravi Bangoria
2024-10-09 6:33 ` [PATCH 0/8] perf/amd/ibs: Fix sample period computations Namhyung Kim
2024-11-19 13:35 ` Ravi Bangoria
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241007034810.754-7-ravi.bangoria@amd.com \
--to=ravi.bangoria@amd.com \
--cc=acme@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=ananth.narayan@amd.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=eranian@google.com \
--cc=hpa@zytor.com \
--cc=irogers@google.com \
--cc=jolsa@kernel.org \
--cc=kan.liang@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mingo@redhat.com \
--cc=namhyung@kernel.org \
--cc=peterz@infradead.org \
--cc=sandipan.das@amd.com \
--cc=santosh.shukla@amd.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®