From: Jacob Keller <jacob.e.keller@intel.com>
To: Vladimir Oltean <olteanv@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Jacob Keller <jacob.e.keller@intel.com>
Subject: [PATCH net-next 7/8] ice: move prefetch enable to ice_setup_rx_ctx
Date: Fri, 11 Oct 2024 11:48:35 -0700 [thread overview]
Message-ID: <20241011-packing-pack-fields-and-ice-implementation-v1-7-d9b1f7500740@intel.com> (raw)
In-Reply-To: <20241011-packing-pack-fields-and-ice-implementation-v1-0-d9b1f7500740@intel.com>
The ice_write_rxq_ctx() function is responsible for programming the Rx
Queue context into hardware. It receives the configuration in unpacked form
via the ice_rlan_ctx structure.
This function unconditionally modifies the context to set the prefetch
enable bit. This was done by commit c31a5c25bb19 ("ice: Always set prefena
when configuring an Rx queue"). Setting this bit makes sense, since
prefetching descriptors is almost always the preferred behavior.
However, the ice_write_rxq_ctx() function is not the place that actually
defines the queue context. We initialize the Rx Queue context in
ice_setup_rx_ctx(). It is surprising to have the Rx queue context changed
by a function who's responsibility is to program the given context to
hardware.
Following the principle of least surprise, move the setting of the prefetch
enable bit out of ice_write_rxq_ctx() and into the ice_setup_rx_ctx().
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
---
drivers/net/ethernet/intel/ice/ice_base.c | 3 +++
drivers/net/ethernet/intel/ice/ice_common.c | 9 +++------
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c
index 9fb7761bad57..c9b2170a3f5c 100644
--- a/drivers/net/ethernet/intel/ice/ice_base.c
+++ b/drivers/net/ethernet/intel/ice/ice_base.c
@@ -453,6 +453,9 @@ static int ice_setup_rx_ctx(struct ice_rx_ring *ring)
/* Rx queue threshold in units of 64 */
rlan_ctx.lrxqthresh = 1;
+ /* Enable descriptor prefetch */
+ rlan_ctx.prefena = 1;
+
/* PF acts as uplink for switchdev; set flex descriptor with src_vsi
* metadata and flags to allow redirecting to PR netdev
*/
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 87db31b57c50..67e5f8729dc4 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -1435,14 +1435,13 @@ void __ice_pack_rxq_ctx(const struct ice_rlan_ctx *ctx, void *buf, size_t len)
}
/**
- * ice_write_rxq_ctx
+ * ice_write_rxq_ctx - Write Rx Queue context to hardware
* @hw: pointer to the hardware structure
* @rlan_ctx: pointer to the rxq context
* @rxq_index: the index of the Rx queue
*
- * Converts rxq context from sparse to dense structure and then writes
- * it to HW register space and enables the hardware to prefetch descriptors
- * instead of only fetching them on demand
+ * Pack the sparse Rx Queue context into dense hardware format and write it
+ * into the HW register space.
*/
int ice_write_rxq_ctx(struct ice_hw *hw, struct ice_rlan_ctx *rlan_ctx,
u32 rxq_index)
@@ -1452,8 +1451,6 @@ int ice_write_rxq_ctx(struct ice_hw *hw, struct ice_rlan_ctx *rlan_ctx,
if (!rlan_ctx)
return -EINVAL;
- rlan_ctx->prefena = 1;
-
ice_pack_rxq_ctx(rlan_ctx, ctx_buf);
return ice_copy_rxq_ctx_to_hw(hw, ctx_buf, rxq_index);
--
2.47.0.265.g4ca455297942
next prev parent reply other threads:[~2024-10-11 18:50 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-11 18:48 [PATCH net-next 0/8] lib: packing: introduce and use (un)pack_fields Jacob Keller
2024-10-11 18:48 ` [PATCH net-next 1/8] lib: packing: create __pack() and __unpack() variants without error checking Jacob Keller
2024-10-14 14:27 ` Vladimir Oltean
2024-10-14 18:52 ` Jacob Keller
2024-10-19 12:45 ` Vladimir Oltean
2024-10-22 19:12 ` Jacob Keller
2024-10-11 18:48 ` [PATCH net-next 2/8] lib: packing: demote truncation error in pack() to a warning in __pack() Jacob Keller
2024-10-11 18:48 ` [PATCH net-next 3/8] lib: packing: add pack_fields() and unpack_fields() Jacob Keller
2024-10-15 19:19 ` Jacob Keller
2024-10-16 13:02 ` Przemek Kitszel
2024-10-16 13:40 ` Vladimir Oltean
2024-10-16 22:31 ` Keller, Jacob E
2024-10-18 21:50 ` Jacob Keller
2024-10-19 12:20 ` Vladimir Oltean
2024-10-22 19:11 ` Jacob Keller
2024-10-24 13:49 ` Vladimir Oltean
2024-10-24 16:38 ` Jacob Keller
2024-10-24 20:14 ` Jacob Keller
2024-10-24 20:30 ` Vladimir Oltean
2024-10-11 18:48 ` [PATCH net-next 4/8] ice: remove int_q_state from ice_tlan_ctx Jacob Keller
2024-10-11 18:48 ` [PATCH net-next 5/8] ice: use <linux/packing.h> for Tx and Rx queue context data Jacob Keller
2024-10-19 13:39 ` Vladimir Oltean
2024-10-22 19:14 ` Jacob Keller
2024-10-11 18:48 ` [PATCH net-next 6/8] ice: reduce size of queue context fields Jacob Keller
2024-10-11 18:48 ` Jacob Keller [this message]
2024-10-11 18:48 ` [PATCH net-next 8/8] ice: cleanup Rx queue context programming functions Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241011-packing-pack-fields-and-ice-implementation-v1-7-d9b1f7500740@intel.com \
--to=jacob.e.keller@intel.com \
--cc=akpm@linux-foundation.org \
--cc=anthony.l.nguyen@intel.com \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®