Re: [PATCH v3] iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()

[Jonathan Cameron <jic23@kernel.org>]

On Sun,  6 Oct 2024 01:34:35 +0530
Mohammed Anees <pvmohammedanees2003@gmail.com> wrote:

> In the current implementation of the ltc2664_channel_config() function,
> a variable named span is declared and initialized to 0, intended to
> capture the return value of the ltc2664_set_span() function. However,
> the output of ltc2664_set_span() is directly assigned to chan->span,
> leaving span unchanged. As a result, when the function later checks
> if (span < 0), this condition will never trigger an error since
> span remains 0, this flaw leads to ineffective error handling. Resolve
> this issue by using the ret variable to get the return value and later
> assign it if successful and remove unused span variable.
> 
> Fixes: 4cc2fc445d2e ("iio: dac: ltc2664: Add driver for LTC2664 and LTC2672")
> Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
> ---
Hmm. I failed to send a reply to say I applied this.

Anyhow better late than never. Applied. Thanks!

Jonathan

> v3
> - Fixed Styling issues
> ---
>  drivers/iio/dac/ltc2664.c | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/dac/ltc2664.c b/drivers/iio/dac/ltc2664.c
> index 5be5345ac5c8..67f14046cf77 100644
> --- a/drivers/iio/dac/ltc2664.c
> +++ b/drivers/iio/dac/ltc2664.c
> @@ -516,7 +516,7 @@ static int ltc2664_channel_config(struct ltc2664_state *st)
>  	const struct ltc2664_chip_info *chip_info = st->chip_info;
>  	struct device *dev = &st->spi->dev;
>  	u32 reg, tmp[2], mspan;
> -	int ret, span = 0;
> +	int ret;
>  
>  	mspan = LTC2664_MSPAN_SOFTSPAN;
>  	ret = device_property_read_u32(dev, "adi,manual-span-operation-config",
> @@ -579,20 +579,21 @@ static int ltc2664_channel_config(struct ltc2664_state *st)
>  		ret = fwnode_property_read_u32_array(child, "output-range-microvolt",
>  						     tmp, ARRAY_SIZE(tmp));
>  		if (!ret && mspan == LTC2664_MSPAN_SOFTSPAN) {
> -			chan->span = ltc2664_set_span(st, tmp[0] / 1000,
> -						      tmp[1] / 1000, reg);
> -			if (span < 0)
> -				return dev_err_probe(dev, span,
> +			ret = ltc2664_set_span(st, tmp[0] / 1000, tmp[1] / 1000, reg);
> +			if (ret < 0)
> +				return dev_err_probe(dev, ret,
>  						     "Failed to set span\n");
> +			chan->span = ret;
>  		}
>  
>  		ret = fwnode_property_read_u32_array(child, "output-range-microamp",
>  						     tmp, ARRAY_SIZE(tmp));
>  		if (!ret) {
> -			chan->span = ltc2664_set_span(st, 0, tmp[1] / 1000, reg);
> -			if (span < 0)
> -				return dev_err_probe(dev, span,
> +			ret = ltc2664_set_span(st, 0, tmp[1] / 1000, reg);
> +			if (ret < 0)
> +				return dev_err_probe(dev, ret,
>  						     "Failed to set span\n");
> +			chan->span = ret;
>  		}
>  	}
>