[PATCH net-next v2 3/3] net: phy: mediatek-ge-soc: Propagate error code correctly in cal_cycle()

[Sky Huang <SkyLake.Huang@mediatek.com>]

From: "SkyLake.Huang" <skylake.huang@mediatek.com>

This patch propagates error code correctly in cal_cycle()
and improve with FIELD_GET().

Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
 drivers/net/phy/mediatek-ge-soc.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/mediatek-ge-soc.c b/drivers/net/phy/mediatek-ge-soc.c
index 1d7719b..a931832 100644
--- a/drivers/net/phy/mediatek-ge-soc.c
+++ b/drivers/net/phy/mediatek-ge-soc.c
@@ -110,7 +110,7 @@
 #define   MTK_PHY_CR_TX_AMP_OFFSET_D_MASK	GENMASK(6, 0)
 
 #define MTK_PHY_RG_AD_CAL_COMP			0x17a
-#define   MTK_PHY_AD_CAL_COMP_OUT_SHIFT		(8)
+#define   MTK_PHY_AD_CAL_COMP_OUT_MASK		GENMASK(8, 8)
 
 #define MTK_PHY_RG_AD_CAL_CLK			0x17b
 #define   MTK_PHY_DA_CAL_CLK			BIT(0)
@@ -351,8 +351,10 @@ static int cal_cycle(struct phy_device *phydev, int devad,
 
 	phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
 			   MTK_PHY_DA_CALIN_FLAG);
-	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
-			   MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP);
+	if (ret < 0)
+		return ret;
+	ret = FIELD_GET(MTK_PHY_AD_CAL_COMP_OUT_MASK, ret);
 	phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
 
 	return ret;
-- 
2.45.2