[PATCH v2 20/36] drm/vc4: txp: Add support for BCM2712 MOP

[Dave Stevenson <dave.stevenson@raspberrypi.com>]

From: Maxime Ripard <mripard@kernel.org>

The BCM2712 has an evolution of what used to be called TXP in the
earlier SoCs, but is now called MOP.

There's a few differences still, so we can add a new compatible to deal
with them easily.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/gpu/drm/vc4/vc4_txp.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c
index 2979d141f3bb..0fb8a57652b5 100644
--- a/drivers/gpu/drm/vc4/vc4_txp.c
+++ b/drivers/gpu/drm/vc4/vc4_txp.c
@@ -386,6 +386,7 @@ static const struct drm_connector_funcs vc4_txp_connector_funcs = {
 static void vc4_txp_encoder_disable(struct drm_encoder *encoder)
 {
 	struct drm_device *drm = encoder->dev;
+	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	struct vc4_txp *txp = encoder_to_vc4_txp(encoder);
 	int idx;
 
@@ -404,7 +405,8 @@ static void vc4_txp_encoder_disable(struct drm_encoder *encoder)
 		WARN_ON(TXP_READ(TXP_DST_CTRL) & TXP_BUSY);
 	}
 
-	TXP_WRITE(TXP_DST_CTRL, TXP_POWERDOWN);
+	if (vc4->gen < VC4_GEN_6_C)
+		TXP_WRITE(TXP_DST_CTRL, TXP_POWERDOWN);
 
 	drm_dev_exit(idx);
 }
@@ -508,6 +510,20 @@ static irqreturn_t vc4_txp_interrupt(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static const struct vc4_txp_data bcm2712_mop_data = {
+	.base = {
+		.name = "mop",
+		.debugfs_name = "mop_regs",
+		.hvs_available_channels = BIT(2),
+		.hvs_output = 2,
+	},
+	.encoder_type = VC4_ENCODER_TYPE_TXP0,
+	.high_addr_ptr_reg = TXP_DST_PTR_HIGH_MOP,
+	.has_byte_enable = true,
+	.size_minus_one = true,
+	.supports_40bit_addresses = true,
+};
+
 const struct vc4_txp_data bcm2835_txp_data = {
 	.base = {
 		.name = "txp",
@@ -613,6 +629,7 @@ static void vc4_txp_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id vc4_txp_dt_match[] = {
+	{ .compatible = "brcm,bcm2712-mop", .data = &bcm2712_mop_data },
 	{ .compatible = "brcm,bcm2835-txp", .data = &bcm2835_txp_data },
 	{ /* sentinel */ },
 };

-- 
2.34.1