From: Wadim Egorov <w.egorov@phytec.de>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <upstream@lists.phytec.de>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/4] arm64: dts: ti: k3-am62-phycore-som: Define vcc-supply for I2C EEPROM
Date: Fri, 1 Nov 2024 14:14:26 +0100 [thread overview]
Message-ID: <20241101131427.3815341-3-w.egorov@phytec.de> (raw)
In-Reply-To: <20241101131427.3815341-1-w.egorov@phytec.de>
Specify the regulator for the EEPROM supply voltage and associate it
with the EEPROM device. This resolves the following warning:
at24 0-0050: supply vcc not found, using dummy regulator
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 43488cc8bcb1..1d6637ff9c41 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -83,6 +83,16 @@ vdd_1v8: regulator-vdd-1v8 {
regulator-boot-on;
};
+ vddshv_3v3: regulator-vddshv-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDSHV0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -287,6 +297,7 @@ eeprom@50 {
compatible = "atmel,24c32";
pagesize = <32>;
reg = <0x50>;
+ vcc-supply = <&vddshv_3v3>;
};
i2c_som_rtc: rtc@52 {
--
2.34.1
next prev parent reply other threads:[~2024-11-01 13:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-01 13:14 [PATCH 1/4] arm64: dts: ti: k3-am62x-phyboard-lyra: Set RGB input to 16-bit for HDMI bridge Wadim Egorov
2024-11-01 13:14 ` [PATCH 2/4] arm64: dts: ti: k3-am62x-phyboard-lyra: Add HDMI bridge regulators Wadim Egorov
2024-11-01 13:14 ` Wadim Egorov [this message]
2024-11-01 13:14 ` [PATCH 4/4] arm64: dts: ti: am62-phyboard-lyra: Provide a vcc-supply for the I2C EEPROM Wadim Egorov
2024-12-26 17:30 ` [PATCH 1/4] arm64: dts: ti: k3-am62x-phyboard-lyra: Set RGB input to 16-bit for HDMI bridge Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241101131427.3815341-3-w.egorov@phytec.de \
--to=w.egorov@phytec.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=upstream@lists.phytec.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®