From: Hironori KIKUCHI <kikuchan98@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Hironori KIKUCHI <kikuchan98@gmail.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <quic_jesszhan@quicinc.com>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Ryan Walklin <ryan@testtoast.com>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org
Subject: [PATCH 7/7] drm: panel: nv3052c: Add YLM-LBV0400001X-V1 panel
Date: Tue, 5 Nov 2024 14:52:35 +0900 [thread overview]
Message-ID: <20241105055239.1577275-8-kikuchan98@gmail.com> (raw)
In-Reply-To: <20241105055239.1577275-1-kikuchan98@gmail.com>
The YLM-LBV0400001X-V1 panel is a display panel used in the Anbernic
RG40XX series (H and V), a handheld gaming device from Anbernic. It is
4.00 inches in size (diagonally) with a resolution of 640x480.
It's similar to YLM-LBV0345001H-V2, but different in size and its
init-sequence. So add entry for the new panel.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
---
.../gpu/drm/panel/panel-newvision-nv3052c.c | 211 ++++++++++++++++++
1 file changed, 211 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 57f6d5b1288..71f81d21465 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -778,6 +778,189 @@ static const struct nv3052c_reg ylm_lbv0345001h_v2_panel_regs[] = {
{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
};
+static const struct nv3052c_reg ylm_lbv0400001x_v1_panel_regs[] = {
+ // EXTC Command set enable, select page 1
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
+ // Mostly unknown registers
+ { 0xe3, 0x00 },
+ { 0x0a, 0x01 },
+ { 0x23, 0xa0 },
+ { 0x25, 0x14 },
+ { 0x28, 0x47 },
+ { 0x29, 0x01 },
+ { 0x2a, 0xdf },
+ { 0x38, 0x9c },
+ { 0x39, 0xa7 },
+ { 0x3a, 0x47 },
+ { 0x91, 0x77 },
+ { 0x92, 0x77 },
+ { 0x99, 0x52 },
+ { 0x9b, 0x5b },
+ { 0xa0, 0x55 },
+ { 0xa1, 0x50 },
+ { 0xa4, 0x9c },
+ { 0xa7, 0x02 },
+ { 0xa8, 0x01 },
+ { 0xa9, 0x01 },
+ { 0xaa, 0xfc },
+ { 0xab, 0x28 },
+ { 0xac, 0x06 },
+ { 0xad, 0x06 },
+ { 0xae, 0x06 },
+ { 0xaf, 0x03 },
+ { 0xb0, 0x08 },
+ { 0xb1, 0x26 },
+ { 0xb2, 0x28 },
+ { 0xb3, 0x28 },
+ { 0xb4, 0x03 },
+ { 0xb5, 0x08 },
+ { 0xb6, 0x26 },
+ { 0xb7, 0x08 },
+ { 0xb8, 0x26 },
+ // EXTC Command set enable, select page 2
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+ // Set gray scale voltage to adjust gamma
+ { 0xb0, 0x05 }, // PGAMVR0
+ { 0xb1, 0x12 }, // PGAMVR1
+ { 0xb2, 0x13 }, // PGAMVR2
+ { 0xb3, 0x2c }, // PGAMVR3
+ { 0xb4, 0x2a }, // PGAMVR4
+ { 0xb5, 0x37 }, // PGAMVR5
+ { 0xb6, 0x27 }, // PGAMPR0
+ { 0xb7, 0x42 }, // PGAMPR1
+ { 0xb8, 0x0f }, // PGAMPK0
+ { 0xb9, 0x06 }, // PGAMPK1
+ { 0xba, 0x12 }, // PGAMPK2
+ { 0xbb, 0x12 }, // PGAMPK3
+ { 0xbc, 0x13 }, // PGAMPK4
+ { 0xbd, 0x15 }, // PGAMPK5
+ { 0xbe, 0x1b }, // PGAMPK6
+ { 0xbf, 0x14 }, // PGAMPK7
+ { 0xc0, 0x1d }, // PGAMPK8
+ { 0xc1, 0x09 }, // PGAMPK9
+ { 0xd0, 0x02 }, // NGAMVR0
+ { 0xd1, 0x1c }, // NGAMVR0
+ { 0xd2, 0x1d }, // NGAMVR1
+ { 0xd3, 0x36 }, // NGAMVR2
+ { 0xd4, 0x34 }, // NGAMVR3
+ { 0xd5, 0x32 }, // NGAMVR4
+ { 0xd6, 0x25 }, // NGAMPR0
+ { 0xd7, 0x40 }, // NGAMPR1
+ { 0xd8, 0x0d }, // NGAMPK0
+ { 0xd9, 0x04 }, // NGAMPK1
+ { 0xda, 0x12 }, // NGAMPK2
+ { 0xdb, 0x12 }, // NGAMPK3
+ { 0xdc, 0x13 }, // NGAMPK4
+ { 0xdd, 0x15 }, // NGAMPK5
+ { 0xde, 0x15 }, // NGAMPK6
+ { 0xdf, 0x0c }, // NGAMPK7
+ { 0xe0, 0x13 }, // NGAMPK8
+ { 0xe1, 0x07 }, // NGAMPK9
+ // EXTC Command set enable, select page 3
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x03 },
+ // Mostly unknown registers
+ { 0x08, 0x0a },
+ { 0x09, 0x0b },
+ { 0x30, 0x00 },
+ { 0x31, 0x00 },
+ { 0x32, 0x00 },
+ { 0x33, 0x00 },
+ { 0x34, 0x61 },
+ { 0x35, 0xd4 },
+ { 0x36, 0x24 },
+ { 0x37, 0x03 },
+ { 0x40, 0x0d },
+ { 0x41, 0x0e },
+ { 0x42, 0x0f },
+ { 0x43, 0x10 },
+ { 0x44, 0x11 },
+ { 0x45, 0xf4 },
+ { 0x46, 0xf5 },
+ { 0x47, 0x11 },
+ { 0x48, 0xf6 },
+ { 0x49, 0xf7 },
+ { 0x50, 0x11 },
+ { 0x51, 0x12 },
+ { 0x52, 0x13 },
+ { 0x53, 0x14 },
+ { 0x54, 0x11 },
+ { 0x55, 0xf8 },
+ { 0x56, 0xf9 },
+ { 0x57, 0x11 },
+ { 0x58, 0xfa },
+ { 0x59, 0xfb },
+ { 0x60, 0x05 },
+ { 0x61, 0x05 },
+ { 0x65, 0x0a },
+ { 0x66, 0x0a },
+ { 0x82, 0x1e },
+ { 0x83, 0x1f },
+ { 0x84, 0x11 },
+ { 0x85, 0x02 },
+ { 0x86, 0x1e },
+ { 0x87, 0x1e },
+ { 0x88, 0x1f },
+ { 0x89, 0x0e },
+ { 0x8a, 0x0e },
+ { 0x8b, 0x10 },
+ { 0x8c, 0x10 },
+ { 0x8d, 0x0a },
+ { 0x8e, 0x0a },
+ { 0x8f, 0x0c },
+ { 0x90, 0x0c },
+ { 0x98, 0x1e },
+ { 0x99, 0x1f },
+ { 0x9a, 0x11 },
+ { 0x9b, 0x01 },
+ { 0x9c, 0x1e },
+ { 0x9d, 0x1e },
+ { 0x9e, 0x1f },
+ { 0x9f, 0x0d },
+ { 0xa0, 0x0d },
+ { 0xa1, 0x0f },
+ { 0xa2, 0x0f },
+ { 0xa3, 0x09 },
+ { 0xa4, 0x09 },
+ { 0xa5, 0x0b },
+ { 0xa6, 0x0b },
+ { 0xb2, 0x1f },
+ { 0xb3, 0x1e },
+ { 0xb4, 0x11 },
+ { 0xb5, 0x01 },
+ { 0xb6, 0x1e },
+ { 0xb7, 0x1e },
+ { 0xb8, 0x1f },
+ { 0xb9, 0x0b },
+ { 0xba, 0x0b },
+ { 0xbb, 0x09 },
+ { 0xbc, 0x09 },
+ { 0xbd, 0x0f },
+ { 0xbe, 0x0f },
+ { 0xbf, 0x0d },
+ { 0xc0, 0x0d },
+ { 0xc8, 0x1f },
+ { 0xc9, 0x1e },
+ { 0xca, 0x11 },
+ { 0xcb, 0x02 },
+ { 0xcc, 0x1e },
+ { 0xcd, 0x1e },
+ { 0xce, 0x1f },
+ { 0xcf, 0x0c },
+ { 0xd0, 0x0c },
+ { 0xd1, 0x0a },
+ { 0xd2, 0x0a },
+ { 0xd3, 0x10 },
+ { 0xd4, 0x10 },
+ { 0xd5, 0x0e },
+ { 0xd6, 0x0e },
+ // EXTC Command set enable, select page 0
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x00 },
+ // Interface Pixel Format
+ { 0x3a, 0x77 },
+ // Display Access Control
+ { 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
+};
+
static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
{
return container_of(panel, struct nv3052c, panel);
@@ -1045,6 +1228,21 @@ static const struct drm_display_mode ylm_lbv0345001h_v2_mode[] = {
},
};
+static const struct drm_display_mode ylm_lbv0400001x_v1_mode[] = {
+ {
+ .clock = 24000,
+ .hdisplay = 640,
+ .hsync_start = 640 + 64,
+ .hsync_end = 640 + 64 + 20,
+ .htotal = 640 + 64 + 20 + 46,
+ .vdisplay = 480,
+ .vsync_start = 480 + 21,
+ .vsync_end = 480 + 21 + 4,
+ .vtotal = 480 + 21 + 4 + 15,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+ },
+};
+
static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
.display_modes = ltk035c5444t_modes,
.num_modes = ARRAY_SIZE(ltk035c5444t_modes),
@@ -1089,11 +1287,23 @@ static const struct nv3052c_panel_info ylm_lbv0345001h_v2_panel_info = {
.panel_regs_len = ARRAY_SIZE(ylm_lbv0345001h_v2_panel_regs),
};
+static const struct nv3052c_panel_info ylm_lbv0400001x_v1_panel_info = {
+ .display_modes = ylm_lbv0400001x_v1_mode,
+ .num_modes = ARRAY_SIZE(ylm_lbv0400001x_v1_mode),
+ .width_mm = 81,
+ .height_mm = 61,
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .panel_regs = ylm_lbv0400001x_v1_panel_regs,
+ .panel_regs_len = ARRAY_SIZE(ylm_lbv0400001x_v1_panel_regs),
+};
+
static const struct spi_device_id nv3052c_ids[] = {
{ "ltk035c5444t", },
{ "fs035vg158", },
{ "wl-355608-a8", },
{ "ylm-lbv0345001h-v2", },
+ { "ylm-lbv0400001x-v1", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, nv3052c_ids);
@@ -1103,6 +1313,7 @@ static const struct of_device_id nv3052c_of_match[] = {
{ .compatible = "fascontek,fs035vg158", .data = &fs035vg158_panel_info },
{ .compatible = "anbernic,wl-355608-a8", .data = &wl_355608_a8_panel_info },
{ .compatible = "anbernic,ylm-lbv0345001h-v2", .data = &ylm_lbv0345001h_v2_panel_info },
+ { .compatible = "anbernic,ylm-lbv0400001x-v1", .data = &ylm_lbv0400001x_v1_panel_info },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, nv3052c_of_match);
--
2.47.0
prev parent reply other threads:[~2024-11-05 5:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-05 5:52 [PATCH 0/7] drm/panel: nv3052c: Fix Anbernic RG35XX panel support (and add RG40XX panel) Hironori KIKUCHI
2024-11-05 5:52 ` [PATCH 1/7] dt-bindings: display: panel: Rename rg35xx-plus-panel back to WL-355608-A8 Hironori KIKUCHI
2024-11-05 14:19 ` Rob Herring
2024-11-05 18:27 ` Conor Dooley
[not found] ` <CAG40kxGhaY_i9_zX_tM4MtCGwUUC2hwpJBAT7XF4Oe6STzA1hw@mail.gmail.com>
2024-11-06 14:29 ` Neil Armstrong
2024-11-05 5:52 ` [PATCH 2/7] drm: panel: nv3052c: " Hironori KIKUCHI
2024-11-05 5:52 ` [PATCH 3/7] drm: panel: nv3052c: Fix size of WL-355608-A8 Hironori KIKUCHI
2024-11-05 5:52 ` [PATCH 4/7] dt-bindings: display: panel: Add YLM-LBV0345001H-V2 panel Hironori KIKUCHI
2024-11-06 7:08 ` kernel test robot
2024-11-05 5:52 ` [PATCH 5/7] drm: panel: nv3052c: " Hironori KIKUCHI
2024-11-05 5:52 ` [PATCH 6/7] dt-bindings: display: panel: Add YLM-LBV0400001X-V1 panel Hironori KIKUCHI
2024-11-05 5:52 ` Hironori KIKUCHI [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241105055239.1577275-8-kikuchan98@gmail.com \
--to=kikuchan98@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh@kernel.org \
--cc=ryan@testtoast.com \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®