[PATCH v5 net-next 2/3] octeontx2-af: Knobs for NPC default rule counters

[Linu Cherian <lcherian@marvell.com>]

Add devlink knobs to enable/disable counters on NPC
default rule entries.

Sample command to enable default rule counters:
devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime

Sample command to read the counter:
cat /sys/kernel/debug/cn10k/npc/mcam_rules

Signed-off-by: Linu Cherian <lcherian@marvell.com>
---
Changelog from v4:
Few code cleanups in npc_config_cntr_default_entries,
- Minor code refactoring to make it explicit that counter reset is done
  only for newly enabled counters
- Removed redundant init for rsp variable
- Removed braces that are not required
- "Reviewed-by" from Simon not added due to above changes.

 .../net/ethernet/marvell/octeontx2/af/rvu.h   |  2 +
 .../marvell/octeontx2/af/rvu_devlink.c        | 32 ++++++++++++++
 .../ethernet/marvell/octeontx2/af/rvu_npc.c   | 43 +++++++++++++++++++
 3 files changed, 77 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index d92a5f47a476..e8c6a6fe9bd5 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -525,6 +525,7 @@ struct rvu {
 	struct mutex		alias_lock; /* Serialize bar2 alias access */
 	int			vfs; /* Number of VFs attached to RVU */
 	u16			vf_devid; /* VF devices id */
+	bool			def_rule_cntr_en;
 	int			nix_blkaddr[MAX_NIX_BLKS];
 
 	/* Mbox */
@@ -989,6 +990,7 @@ void npc_set_mcam_action(struct rvu *rvu, struct npc_mcam *mcam,
 void npc_read_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam,
 			 int blkaddr, u16 src, struct mcam_entry *entry,
 			 u8 *intf, u8 *ena);
+int npc_config_cntr_default_entries(struct rvu *rvu, bool enable);
 bool is_cgx_config_permitted(struct rvu *rvu, u16 pcifunc);
 bool is_mac_feature_supported(struct rvu *rvu, int pf, int feature);
 u32  rvu_cgx_get_fifolen(struct rvu *rvu);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
index 7498ab429963..9c26e19a860b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
@@ -1238,6 +1238,7 @@ enum rvu_af_dl_param_id {
 	RVU_AF_DEVLINK_PARAM_ID_DWRR_MTU,
 	RVU_AF_DEVLINK_PARAM_ID_NPC_MCAM_ZONE_PERCENT,
 	RVU_AF_DEVLINK_PARAM_ID_NPC_EXACT_FEATURE_DISABLE,
+	RVU_AF_DEVLINK_PARAM_ID_NPC_DEF_RULE_CNTR_ENABLE,
 	RVU_AF_DEVLINK_PARAM_ID_NIX_MAXLF,
 };
 
@@ -1358,6 +1359,32 @@ static int rvu_af_dl_npc_mcam_high_zone_percent_validate(struct devlink *devlink
 	return 0;
 }
 
+static int rvu_af_dl_npc_def_rule_cntr_get(struct devlink *devlink, u32 id,
+					   struct devlink_param_gset_ctx *ctx)
+{
+	struct rvu_devlink *rvu_dl = devlink_priv(devlink);
+	struct rvu *rvu = rvu_dl->rvu;
+
+	ctx->val.vbool = rvu->def_rule_cntr_en;
+
+	return 0;
+}
+
+static int rvu_af_dl_npc_def_rule_cntr_set(struct devlink *devlink, u32 id,
+					   struct devlink_param_gset_ctx *ctx,
+					   struct netlink_ext_ack *extack)
+{
+	struct rvu_devlink *rvu_dl = devlink_priv(devlink);
+	struct rvu *rvu = rvu_dl->rvu;
+	int err;
+
+	err = npc_config_cntr_default_entries(rvu, ctx->val.vbool);
+	if (!err)
+		rvu->def_rule_cntr_en = ctx->val.vbool;
+
+	return err;
+}
+
 static int rvu_af_dl_nix_maxlf_get(struct devlink *devlink, u32 id,
 				   struct devlink_param_gset_ctx *ctx)
 {
@@ -1444,6 +1471,11 @@ static const struct devlink_param rvu_af_dl_params[] = {
 			     rvu_af_dl_npc_mcam_high_zone_percent_get,
 			     rvu_af_dl_npc_mcam_high_zone_percent_set,
 			     rvu_af_dl_npc_mcam_high_zone_percent_validate),
+	DEVLINK_PARAM_DRIVER(RVU_AF_DEVLINK_PARAM_ID_NPC_DEF_RULE_CNTR_ENABLE,
+			     "npc_def_rule_cntr", DEVLINK_PARAM_TYPE_BOOL,
+			     BIT(DEVLINK_PARAM_CMODE_RUNTIME),
+			     rvu_af_dl_npc_def_rule_cntr_get,
+			     rvu_af_dl_npc_def_rule_cntr_set, NULL),
 	DEVLINK_PARAM_DRIVER(RVU_AF_DEVLINK_PARAM_ID_NIX_MAXLF,
 			     "nix_maxlf", DEVLINK_PARAM_TYPE_U16,
 			     BIT(DEVLINK_PARAM_CMODE_RUNTIME),
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index c4ef1e83cc46..821fe242f821 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -2691,6 +2691,49 @@ void npc_mcam_rsrcs_reserve(struct rvu *rvu, int blkaddr, int entry_idx)
 	npc_mcam_set_bit(mcam, entry_idx);
 }
 
+int npc_config_cntr_default_entries(struct rvu *rvu, bool enable)
+{
+	struct npc_mcam *mcam = &rvu->hw->mcam;
+	struct npc_install_flow_rsp rsp;
+	struct rvu_npc_mcam_rule *rule;
+	int blkaddr;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
+	if (blkaddr < 0)
+		return -EINVAL;
+
+	mutex_lock(&mcam->lock);
+	list_for_each_entry(rule, &mcam->mcam_rules, list) {
+		if (!is_mcam_entry_enabled(rvu, mcam, blkaddr, rule->entry))
+			continue;
+		if (!rule->default_rule)
+			continue;
+		if (enable && !rule->has_cntr) { /* Alloc and map new counter */
+			__rvu_mcam_add_counter_to_rule(rvu, rule->owner,
+						       rule, &rsp);
+			if (rsp.counter < 0) {
+				dev_err(rvu->dev,
+					"%s: Failed to allocate cntr for default rule (err=%d)\n",
+					__func__, rsp.counter);
+				break;
+			}
+			npc_map_mcam_entry_and_cntr(rvu, mcam, blkaddr,
+						    rule->entry, rsp.counter);
+			/* Reset counter before use */
+			rvu_write64(rvu, blkaddr,
+				    NPC_AF_MATCH_STATX(rule->cntr), 0x0);
+		}
+
+		/* Free and unmap counter */
+		if (!enable && rule->has_cntr)
+			__rvu_mcam_remove_counter_from_rule(rvu, rule->owner,
+							    rule);
+	}
+	mutex_unlock(&mcam->lock);
+
+	return 0;
+}
+
 int rvu_mbox_handler_npc_mcam_alloc_entry(struct rvu *rvu,
 					  struct npc_mcam_alloc_entry_req *req,
 					  struct npc_mcam_alloc_entry_rsp *rsp)
-- 
2.34.1