[PATCH net-next v2 1/2] net: ethernet: ti: am65-cpsw: update pri_thread_map as per IEEE802.1Q-2014

[Roger Quadros <rogerq@kernel.org>]

IEEE802.1Q-2014 supersedes IEEE802.1D-2004. Now Priority Code Point (PCP)
2 is no longer at a lower priority than PCP 0. PCP 1 (Background) is still
at a lower priority than PCP 0 (Best Effort).

Reference:
IEEE802.1Q-2014, Standard for Local and metropolitan area networks
  Table I-2 - Traffic type acronyms
  Table I-3 - Defining traffic types

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 drivers/net/ethernet/ti/cpsw_ale.c | 36 ++++++++++++++++++++++--------------
 1 file changed, 22 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 8d02d2b21429..9f79056b3f48 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -1692,26 +1692,34 @@ static void cpsw_ale_policer_reset(struct cpsw_ale *ale)
 void cpsw_ale_classifier_setup_default(struct cpsw_ale *ale, int num_rx_ch)
 {
 	int pri, idx;
-	/* IEEE802.1D-2004, Standard for Local and metropolitan area networks
-	 *    Table G-2 - Traffic type acronyms
-	 *    Table G-3 - Defining traffic types
-	 * User priority values 1 and 2 effectively communicate a lower
-	 * priority than 0. In the below table 0 is assigned to higher priority
-	 * thread than 1 and 2 wherever possible.
-	 * The below table maps which thread the user priority needs to be
+
+	/* Reference:
+	 * IEEE802.1Q-2014, Standard for Local and metropolitan area networks
+	 *    Table I-2 - Traffic type acronyms
+	 *    Table I-3 - Defining traffic types
+	 * Section I.4 Traffic types and priority values, states:
+	 * "0 is thus used both for default priority and for Best Effort, and
+	 *  Background is associated with a priority value of 1. This means
+	 * that the value 1 effectively communicates a lower priority than 0."
+	 *
+	 * In the table below, Priority Code Point (PCP) 0 is assigned
+	 * to a higher priority thread than PCP 1 wherever possible.
+	 * The table maps which thread the PCP traffic needs to be
 	 * sent to for a given number of threads (RX channels). Upper threads
 	 * have higher priority.
 	 * e.g. if number of threads is 8 then user priority 0 will map to
-	 * pri_thread_map[8-1][0] i.e. thread 2
+	 * pri_thread_map[8-1][0] i.e. thread 1
 	 */
-	int pri_thread_map[8][8] = {	{ 0, 0, 0, 0, 0, 0, 0, 0, },
+
+	int pri_thread_map[8][8] = {   /* BK,BE,EE,CA,VI,VO,IC,NC */
+					{ 0, 0, 0, 0, 0, 0, 0, 0, },
 					{ 0, 0, 0, 0, 1, 1, 1, 1, },
 					{ 0, 0, 0, 0, 1, 1, 2, 2, },
-					{ 1, 0, 0, 1, 2, 2, 3, 3, },
-					{ 1, 0, 0, 1, 2, 3, 4, 4, },
-					{ 1, 0, 0, 2, 3, 4, 5, 5, },
-					{ 1, 0, 0, 2, 3, 4, 5, 6, },
-					{ 2, 0, 1, 3, 4, 5, 6, 7, } };
+					{ 0, 0, 1, 1, 2, 2, 3, 3, },
+					{ 0, 0, 1, 1, 2, 2, 3, 4, },
+					{ 1, 0, 2, 2, 3, 3, 4, 5, },
+					{ 1, 0, 2, 3, 4, 4, 5, 6, },
+					{ 1, 0, 2, 3, 4, 5, 6, 7 } };
 
 	cpsw_ale_policer_reset(ale);
 

-- 
2.34.1