From: Shinas Rasheed <srasheed@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <hgani@marvell.com>, <sedara@marvell.com>, <vimleshk@marvell.com>,
<thaller@redhat.com>, <wizhao@redhat.com>, <kheib@redhat.com>,
<egallen@redhat.com>, <konguyen@redhat.com>, <horms@kernel.org>,
<frank.feng@synaxg.com>, Shinas Rasheed <srasheed@marvell.com>,
Veerasenareddy Burru <vburru@marvell.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH net-next] octeon_ep: add ndo ops for VFs in PF driver
Date: Thu, 7 Nov 2024 04:16:37 -0800 [thread overview]
Message-ID: <20241107121637.1117089-1-srasheed@marvell.com> (raw)
These APIs are needed to support applicaitons that use netlink to get VF
information from a PF driver.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
---
.../ethernet/marvell/octeon_ep/octep_main.c | 98 +++++++++++++++++++
.../ethernet/marvell/octeon_ep/octep_main.h | 1 +
.../marvell/octeon_ep/octep_pfvf_mbox.c | 22 ++++-
.../marvell/octeon_ep/octep_pfvf_mbox.h | 3 +
4 files changed, 122 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index 549436efc204..129c68f5a4ba 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -1137,6 +1137,95 @@ static int octep_set_features(struct net_device *dev, netdev_features_t features
return err;
}
+static int octep_get_vf_config(struct net_device *dev, int vf, struct ifla_vf_info *ivi)
+{
+ struct octep_device *oct = netdev_priv(dev);
+
+ ivi->vf = vf;
+ ether_addr_copy(ivi->mac, oct->vf_info[vf].mac_addr);
+ ivi->vlan = 0;
+ ivi->qos = 0;
+ ivi->spoofchk = 0;
+ ivi->linkstate = IFLA_VF_LINK_STATE_ENABLE;
+ ivi->trusted = true;
+ ivi->max_tx_rate = 10000;
+ ivi->min_tx_rate = 0;
+
+ return 0;
+}
+
+static int octep_set_vf_mac(struct net_device *dev, int vf, u8 *mac)
+{
+ struct octep_device *oct = netdev_priv(dev);
+ int i, err;
+
+ if (!is_valid_ether_addr(mac)) {
+ dev_err(&oct->pdev->dev, "Invalid MAC Address %pM\n", mac);
+ return -EADDRNOTAVAIL;
+ }
+
+ dev_dbg(&oct->pdev->dev, "set vf-%d mac to %pM\n", vf, mac);
+ for (i = 0; i < ETH_ALEN; i++)
+ oct->vf_info[vf].mac_addr[i] = mac[i];
+ oct->vf_info[vf].flags |= OCTEON_PFVF_FLAG_MAC_SET_BY_PF;
+
+ err = octep_ctrl_net_set_mac_addr(oct, vf, mac, true);
+ if (err) {
+ dev_err(&oct->pdev->dev, "Set VF%d MAC address failed via host control Mbox\n", vf);
+ return err;
+ }
+
+ return 0;
+}
+
+static int octep_set_vf_vlan(struct net_device *dev, int vf, u16 vlan, u8 qos, __be16 vlan_proto)
+{
+ struct octep_device *oct = netdev_priv(dev);
+
+ dev_err(&oct->pdev->dev, "Setting VF VLAN not supported\n");
+ return 0;
+}
+
+static int octep_set_vf_spoofchk(struct net_device *dev, int vf, bool setting)
+{
+ struct octep_device *oct = netdev_priv(dev);
+
+ dev_err(&oct->pdev->dev, "Setting VF spoof check not supported\n");
+ return 0;
+}
+
+static int octep_set_vf_trust(struct net_device *dev, int vf, bool setting)
+{
+ struct octep_device *oct = netdev_priv(dev);
+
+ dev_err(&oct->pdev->dev, "Setting VF trust not supported\n");
+ return 0;
+}
+
+static int octep_set_vf_rate(struct net_device *dev, int vf, int min_tx_rate, int max_tx_rate)
+{
+ struct octep_device *oct = netdev_priv(dev);
+
+ dev_err(&oct->pdev->dev, "Setting VF rate not supported\n");
+ return 0;
+}
+
+static int octep_set_vf_link_state(struct net_device *dev, int vf, int link_state)
+{
+ struct octep_device *oct = netdev_priv(dev);
+
+ dev_err(&oct->pdev->dev, "Setting VF link state not supported\n");
+ return 0;
+}
+
+static int octep_get_vf_stats(struct net_device *dev, int vf, struct ifla_vf_stats *vf_stats)
+{
+ struct octep_device *oct = netdev_priv(dev);
+
+ dev_err(&oct->pdev->dev, "Getting VF stats not supported\n");
+ return 0;
+}
+
static const struct net_device_ops octep_netdev_ops = {
.ndo_open = octep_open,
.ndo_stop = octep_stop,
@@ -1146,6 +1235,15 @@ static const struct net_device_ops octep_netdev_ops = {
.ndo_set_mac_address = octep_set_mac,
.ndo_change_mtu = octep_change_mtu,
.ndo_set_features = octep_set_features,
+ /* for VFs */
+ .ndo_get_vf_config = octep_get_vf_config,
+ .ndo_set_vf_mac = octep_set_vf_mac,
+ .ndo_set_vf_vlan = octep_set_vf_vlan,
+ .ndo_set_vf_spoofchk = octep_set_vf_spoofchk,
+ .ndo_set_vf_trust = octep_set_vf_trust,
+ .ndo_set_vf_rate = octep_set_vf_rate,
+ .ndo_set_vf_link_state = octep_set_vf_link_state,
+ .ndo_get_vf_stats = octep_get_vf_stats,
};
/**
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.h b/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
index fee59e0e0138..3b56916af468 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
@@ -220,6 +220,7 @@ struct octep_iface_link_info {
/* The Octeon VF device specific info data structure.*/
struct octep_pfvf_info {
u8 mac_addr[ETH_ALEN];
+ u32 flags;
u32 mbox_version;
};
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_pfvf_mbox.c b/drivers/net/ethernet/marvell/octeon_ep/octep_pfvf_mbox.c
index e6eb98d70f3c..be21ad5ec75e 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_pfvf_mbox.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_pfvf_mbox.c
@@ -156,12 +156,23 @@ static void octep_pfvf_set_mac_addr(struct octep_device *oct, u32 vf_id,
{
int err;
+ if (oct->vf_info[vf_id].flags & OCTEON_PFVF_FLAG_MAC_SET_BY_PF) {
+ dev_err(&oct->pdev->dev,
+ "VF%d attampted to override administrative set MAC address\n",
+ vf_id);
+ rsp->s_set_mac.type = OCTEP_PFVF_MBOX_TYPE_RSP_NACK;
+ return;
+ }
+
err = octep_ctrl_net_set_mac_addr(oct, vf_id, cmd.s_set_mac.mac_addr, true);
if (err) {
rsp->s_set_mac.type = OCTEP_PFVF_MBOX_TYPE_RSP_NACK;
- dev_err(&oct->pdev->dev, "Set VF MAC address failed via host control Mbox\n");
+ dev_err(&oct->pdev->dev, "Set VF%d MAC address failed via host control Mbox\n",
+ vf_id);
return;
}
+
+ ether_addr_copy(oct->vf_info[vf_id].mac_addr, cmd.s_set_mac.mac_addr);
rsp->s_set_mac.type = OCTEP_PFVF_MBOX_TYPE_RSP_ACK;
}
@@ -171,10 +182,17 @@ static void octep_pfvf_get_mac_addr(struct octep_device *oct, u32 vf_id,
{
int err;
+ if (oct->vf_info[vf_id].flags & OCTEON_PFVF_FLAG_MAC_SET_BY_PF) {
+ dev_dbg(&oct->pdev->dev, "VF%d MAC address set by PF\n", vf_id);
+ ether_addr_copy(rsp->s_set_mac.mac_addr, oct->vf_info[vf_id].mac_addr);
+ rsp->s_set_mac.type = OCTEP_PFVF_MBOX_TYPE_RSP_ACK;
+ return;
+ }
err = octep_ctrl_net_get_mac_addr(oct, vf_id, rsp->s_set_mac.mac_addr);
if (err) {
rsp->s_set_mac.type = OCTEP_PFVF_MBOX_TYPE_RSP_NACK;
- dev_err(&oct->pdev->dev, "Get VF MAC address failed via host control Mbox\n");
+ dev_err(&oct->pdev->dev, "Get VF%d MAC address failed via host control Mbox\n",
+ vf_id);
return;
}
rsp->s_set_mac.type = OCTEP_PFVF_MBOX_TYPE_RSP_ACK;
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_pfvf_mbox.h b/drivers/net/ethernet/marvell/octeon_ep/octep_pfvf_mbox.h
index 0dc6eead292a..339977c7131a 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_pfvf_mbox.h
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_pfvf_mbox.h
@@ -23,6 +23,9 @@ enum octep_pfvf_mbox_version {
#define OCTEP_PFVF_MBOX_VERSION_CURRENT OCTEP_PFVF_MBOX_VERSION_V2
+/* VF flags */
+#define OCTEON_PFVF_FLAG_MAC_SET_BY_PF BIT_ULL(0) /* PF has set VF MAC address */
+
enum octep_pfvf_mbox_opcode {
OCTEP_PFVF_MBOX_CMD_VERSION,
OCTEP_PFVF_MBOX_CMD_SET_MTU,
--
2.25.1
next reply other threads:[~2024-11-07 12:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 12:16 Shinas Rasheed [this message]
2024-11-10 13:18 ` Simon Horman
2024-11-11 5:29 ` [EXTERNAL] " Shinas Rasheed
2024-11-12 14:12 ` Simon Horman
2024-11-11 6:08 ` Kalesh Anakkur Purayil
2024-11-12 18:30 ` [EXTERNAL] " Shinas Rasheed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107121637.1117089-1-srasheed@marvell.com \
--to=srasheed@marvell.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=egallen@redhat.com \
--cc=frank.feng@synaxg.com \
--cc=hgani@marvell.com \
--cc=horms@kernel.org \
--cc=kheib@redhat.com \
--cc=konguyen@redhat.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sedara@marvell.com \
--cc=thaller@redhat.com \
--cc=vburru@marvell.com \
--cc=vimleshk@marvell.com \
--cc=wizhao@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®