From: Bjorn Helgaas <helgaas@kernel.org>
To: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Joerg Roedel <jroedel@suse.de>, Rob Herring <robh@kernel.org>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Anders Roxell <anders.roxell@linaro.org>,
iommu@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, Xingang Wang <wangxingang5@huawei.com>
Subject: Re: [PATCH RESEND] iommu/of: Fix pci_request_acs() before enumerating PCI devices
Date: Thu, 7 Nov 2024 10:19:39 -0600 [thread overview]
Message-ID: <20241107161939.GA1618126@bhelgaas> (raw)
In-Reply-To: <20241107-pci_acs_fix-v1-1-185a2462a571@quicinc.com>
On Thu, Nov 07, 2024 at 01:29:15PM +0530, Pavankumar Kondeti wrote:
> From: Xingang Wang <wangxingang5@huawei.com>
>
> When booting with devicetree, the pci_request_acs() is called after the
> enumeration and initialization of PCI devices, thus the ACS is not
> enabled. And ACS should be enabled when IOMMU is detected for the
> PCI host bridge, so add check for IOMMU before probe of PCI host and call
> pci_request_acs() to make sure ACS will be enabled when enumerating PCI
> devices.
>
> Fixes: 6bf6c24720d33 ("iommu/of: Request ACS from the PCI core when configuring IOMMU linkage")
> Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
> Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
> ---
> Earlier this patch made it to linux-next but got dropped later as it
> broke PCI on ARM Juno R1 board. AFAICT, this issue is never root caused,
> so resending this patch to get attention again.
>
> https://lore.kernel.org/all/1621566204-37456-1-git-send-email-wangxingang5@huawei.com/
>
> The original problem that is being fixed by this patch still exists. In
> my use case, all the PCI VF(s) assigned to a VM are sharing the same
> group since these functions are attached under a Multi function PCIe root port
FWIW, here are the problem reports (which are buried in the thread
above):
https://lore.kernel.org/all/01314d70-41e6-70f9-e496-84091948701a@samsung.com/ (Marek)
https://lore.kernel.org/all/CADYN=9JWU3CMLzMEcD5MSQGnaLyDRSKc5SofBFHUax6YuTRaJA@mail.gmail.com/ (Anders)
Given problem reports, the fact that the patch was acked and reviewed
earlier means nothing. We have to ensure that any issues are resolved
before considering this patch again.
> emulated by the QEMU. This patch fixes that problem.
> ---
> drivers/iommu/of_iommu.c | 1 -
> drivers/pci/of.c | 8 +++++++-
> 2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
> index e7a6a1611d19..f19db52388f5 100644
> --- a/drivers/iommu/of_iommu.c
> +++ b/drivers/iommu/of_iommu.c
> @@ -141,7 +141,6 @@ int of_iommu_configure(struct device *dev, struct device_node *master_np,
> .np = master_np,
> };
>
> - pci_request_acs();
> err = pci_for_each_dma_alias(to_pci_dev(dev),
> of_pci_iommu_init, &info);
> of_pci_check_device_ats(dev, master_np);
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index dacea3fc5128..dc90f4e45dd3 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -637,9 +637,15 @@ static int pci_parse_request_of_pci_ranges(struct device *dev,
>
> int devm_of_pci_bridge_init(struct device *dev, struct pci_host_bridge *bridge)
> {
> - if (!dev->of_node)
> + struct device_node *node = dev->of_node;
> +
> + if (!node)
> return 0;
>
> + /* Detect IOMMU and make sure ACS will be enabled */
> + if (of_property_read_bool(node, "iommu-map"))
> + pci_request_acs();
> +
> bridge->swizzle_irq = pci_common_swizzle;
> bridge->map_irq = of_irq_parse_and_map_pci;
>
>
> ---
> base-commit: 59b723cd2adbac2a34fc8e12c74ae26ae45bf230
> change-id: 20241107-pci_acs_fix-2239e0fb1768
>
> Best regards,
> --
> Pavankumar Kondeti <quic_pkondeti@quicinc.com>
>
prev parent reply other threads:[~2024-11-07 16:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 7:59 Pavankumar Kondeti
2024-11-07 8:17 ` Greg Kroah-Hartman
2024-11-07 8:42 ` Pavan Kondeti
2024-11-07 16:19 ` Bjorn Helgaas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107161939.GA1618126@bhelgaas \
--to=helgaas@kernel.org \
--cc=anders.roxell@linaro.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=jroedel@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=quic_pkondeti@quicinc.com \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=wangxingang5@huawei.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®