From: Ankur Arora <ankur.a.arora@oracle.com>
To: linux-pm@vger.kernel.org, kvm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: catalin.marinas@arm.com, will@kernel.org, tglx@linutronix.de,
mingo@redhat.com, bp@alien8.de, dave.hansen@linux.intel.com,
x86@kernel.org, hpa@zytor.com, pbonzini@redhat.com,
vkuznets@redhat.com, rafael@kernel.org,
daniel.lezcano@linaro.org, peterz@infradead.org, arnd@arndb.de,
lenb@kernel.org, mark.rutland@arm.com, harisokn@amazon.com,
mtosatti@redhat.com, sudeep.holla@arm.com, cl@gentwo.org,
maz@kernel.org, misono.tomohiro@fujitsu.com, maobibo@loongson.cn,
zhenglifeng1@huawei.com, joao.m.martins@oracle.com,
boris.ostrovsky@oracle.com, konrad.wilk@oracle.com
Subject: [PATCH v9 03/15] cpuidle: rename ARCH_HAS_CPU_RELAX to ARCH_HAS_OPTIMIZED_POLL
Date: Thu, 7 Nov 2024 11:08:06 -0800 [thread overview]
Message-ID: <20241107190818.522639-4-ankur.a.arora@oracle.com> (raw)
In-Reply-To: <20241107190818.522639-1-ankur.a.arora@oracle.com>
ARCH_HAS_CPU_RELAX is defined on architectures that provide an
primitive (via cpu_relax()) that can be used as part of a polling
mechanism -- one that would be cheaper than spinning in a tight
loop.
However, recent changes in poll_idle() mean that a higher level
primitive -- smp_cond_load_relaxed() is used for polling. This would
in-turn use cpu_relax() or an architecture specific implementation.
On ARM64 in particular this turns into a WFE which waits on a store
to a cacheline instead of a busy poll.
Accordingly condition the polling drivers on ARCH_HAS_OPTIMIZED_POLL
instead of ARCH_HAS_CPU_RELAX. While at it, make both intel-idle
and cpuidle-haltpoll explicitly depend on ARCH_HAS_CPU_RELAX.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
---
arch/x86/Kconfig | 2 +-
drivers/acpi/processor_idle.c | 4 ++--
drivers/cpuidle/Kconfig | 2 +-
drivers/cpuidle/Makefile | 2 +-
drivers/idle/Kconfig | 1 +
include/linux/cpuidle.h | 2 +-
6 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 16354dfa6d96..3fa741dc0445 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -378,7 +378,7 @@ config ARCH_MAY_HAVE_PC_FDC
config GENERIC_CALIBRATE_DELAY
def_bool y
-config ARCH_HAS_CPU_RELAX
+config ARCH_HAS_OPTIMIZED_POLL
def_bool y
config ARCH_HIBERNATION_POSSIBLE
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 831fa4a12159..44096406d65d 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -35,7 +35,7 @@
#include <asm/cpu.h>
#endif
-#define ACPI_IDLE_STATE_START (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0)
+#define ACPI_IDLE_STATE_START (IS_ENABLED(CONFIG_ARCH_HAS_OPTIMIZED_POLL) ? 1 : 0)
static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
module_param(max_cstate, uint, 0400);
@@ -782,7 +782,7 @@ static int acpi_processor_setup_cstates(struct acpi_processor *pr)
if (max_cstate == 0)
max_cstate = 1;
- if (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX)) {
+ if (IS_ENABLED(CONFIG_ARCH_HAS_OPTIMIZED_POLL)) {
cpuidle_poll_state_init(drv);
count = 1;
} else {
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index cac5997dca50..75f6e176bbc8 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -73,7 +73,7 @@ endmenu
config HALTPOLL_CPUIDLE
tristate "Halt poll cpuidle driver"
- depends on X86 && KVM_GUEST
+ depends on X86 && KVM_GUEST && ARCH_HAS_OPTIMIZED_POLL
select CPU_IDLE_GOV_HALTPOLL
default y
help
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index d103342b7cfc..f29dfd1525b0 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -7,7 +7,7 @@ obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
obj-$(CONFIG_DT_IDLE_STATES) += dt_idle_states.o
obj-$(CONFIG_DT_IDLE_GENPD) += dt_idle_genpd.o
-obj-$(CONFIG_ARCH_HAS_CPU_RELAX) += poll_state.o
+obj-$(CONFIG_ARCH_HAS_OPTIMIZED_POLL) += poll_state.o
obj-$(CONFIG_HALTPOLL_CPUIDLE) += cpuidle-haltpoll.o
##################################################################################
diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig
index 6707d2539fc4..6f9b1d48fede 100644
--- a/drivers/idle/Kconfig
+++ b/drivers/idle/Kconfig
@@ -4,6 +4,7 @@ config INTEL_IDLE
depends on CPU_IDLE
depends on X86
depends on CPU_SUP_INTEL
+ depends on ARCH_HAS_OPTIMIZED_POLL
help
Enable intel_idle, a cpuidle driver that includes knowledge of
native Intel hardware idle features. The acpi_idle driver
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 3183aeb7f5b4..7e7e58a17b07 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -275,7 +275,7 @@ static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev,
}
#endif
-#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_ARCH_HAS_CPU_RELAX)
+#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_ARCH_HAS_OPTIMIZED_POLL)
void cpuidle_poll_state_init(struct cpuidle_driver *drv);
#else
static inline void cpuidle_poll_state_init(struct cpuidle_driver *drv) {}
--
2.43.5
next prev parent reply other threads:[~2024-11-07 19:09 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 19:08 [PATCH v9 00/15] arm64: support poll_idle() Ankur Arora
2024-11-07 19:08 ` [PATCH v9 01/15] asm-generic: add barrier smp_cond_load_relaxed_timeout() Ankur Arora
2024-11-08 2:33 ` Christoph Lameter (Ampere)
2024-11-08 7:53 ` Ankur Arora
2024-11-08 19:41 ` Christoph Lameter (Ampere)
2024-11-08 22:15 ` Ankur Arora
2024-11-12 16:50 ` Christoph Lameter (Ampere)
2024-11-14 17:22 ` Catalin Marinas
2024-11-15 0:28 ` Ankur Arora
2024-11-26 5:01 ` Ankur Arora
2024-11-26 10:36 ` Catalin Marinas
2024-11-07 19:08 ` [PATCH v9 02/15] cpuidle/poll_state: poll via smp_cond_load_relaxed_timeout() Ankur Arora
2024-11-07 19:08 ` Ankur Arora [this message]
2024-11-07 19:08 ` [PATCH v9 04/15] Kconfig: move ARCH_HAS_OPTIMIZED_POLL to arch/Kconfig Ankur Arora
2024-11-07 19:08 ` [PATCH v9 05/15] arm64: barrier: add support for smp_cond_relaxed_timeout() Ankur Arora
2024-12-10 13:50 ` Will Deacon
2024-12-10 20:14 ` Ankur Arora
2024-11-07 19:08 ` [PATCH v9 06/15] arm64: define TIF_POLLING_NRFLAG Ankur Arora
2024-11-07 19:08 ` [PATCH v9 07/15] arm64: add support for polling in idle Ankur Arora
2024-11-07 19:08 ` [PATCH v9 08/15] ACPI: processor_idle: Support polling state for LPI Ankur Arora
2024-11-07 19:08 ` [PATCH v9 09/15] cpuidle-haltpoll: define arch_haltpoll_want() Ankur Arora
2024-11-07 19:08 ` [PATCH v9 10/15] governors/haltpoll: drop kvm_para_available() check Ankur Arora
2024-11-07 19:08 ` [PATCH v9 11/15] cpuidle-haltpoll: condition on ARCH_CPUIDLE_HALTPOLL Ankur Arora
2024-11-07 19:08 ` [PATCH v9 12/15] arm64: idle: export arch_cpu_idle Ankur Arora
2024-11-07 19:08 ` [PATCH v9 13/15] arm64: support cpuidle-haltpoll Ankur Arora
2024-11-07 19:08 ` [RFC PATCH v9 14/15] arm64/delay: move some constants out to a separate header Ankur Arora
2024-11-08 2:25 ` Christoph Lameter (Ampere)
2024-11-08 7:49 ` Ankur Arora
2024-11-07 19:08 ` [RFC PATCH v9 15/15] arm64: support WFET in smp_cond_relaxed_timeout() Ankur Arora
2025-01-07 5:23 ` [PATCH v9 00/15] arm64: support poll_idle() Ankur Arora
2025-01-20 21:13 ` Ankur Arora
2025-01-21 9:55 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107190818.522639-4-ankur.a.arora@oracle.com \
--to=ankur.a.arora@oracle.com \
--cc=arnd@arndb.de \
--cc=boris.ostrovsky@oracle.com \
--cc=bp@alien8.de \
--cc=catalin.marinas@arm.com \
--cc=cl@gentwo.org \
--cc=daniel.lezcano@linaro.org \
--cc=dave.hansen@linux.intel.com \
--cc=harisokn@amazon.com \
--cc=hpa@zytor.com \
--cc=joao.m.martins@oracle.com \
--cc=konrad.wilk@oracle.com \
--cc=kvm@vger.kernel.org \
--cc=lenb@kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=maobibo@loongson.cn \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=mingo@redhat.com \
--cc=misono.tomohiro@fujitsu.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=rafael@kernel.org \
--cc=sudeep.holla@arm.com \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=will@kernel.org \
--cc=x86@kernel.org \
--cc=zhenglifeng1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome