[PATCH v1 3/6] pinctrl: cy8c95x0: use flexible sleeping in reset function

[Andy Shevchenko <andy.shevchenko@gmail.com>]

The device reset assert and deassert length was created by usleep_range()
but that does not ensure optimal handling of all the different values from
device tree properties. By switching to the new flexible sleeping helper
function, fsleep(), the correct delay function is called depending on
delay length, e.g. udelay(), usleep_range() or msleep().

While at it, move out GPIO consumer name setting of the reset conditional,
the all necessary checks are already done there, so logically that call is
not related to the reset sequence.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/pinctrl/pinctrl-cy8c95x0.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c
index cb6d9458c1e8..54b080f63226 100644
--- a/drivers/pinctrl/pinctrl-cy8c95x0.c
+++ b/drivers/pinctrl/pinctrl-cy8c95x0.c
@@ -1475,12 +1475,11 @@ static int cy8c95x0_probe(struct i2c_client *client)
 	chip->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(chip->gpio_reset))
 		return dev_err_probe(chip->dev, PTR_ERR(chip->gpio_reset), "Failed to get GPIO 'reset'\n");
+	gpiod_set_consumer_name(chip->gpio_reset, "CY8C95X0 RESET");
 	if (chip->gpio_reset) {
-		usleep_range(1000, 2000);
+		fsleep(1000);
 		gpiod_set_value_cansleep(chip->gpio_reset, 0);
-		usleep_range(250000, 300000);
-
-		gpiod_set_consumer_name(chip->gpio_reset, "CY8C95X0 RESET");
+		fsleep(250000);
 	}
 
 	/* Regmap for direct and paged registers */
-- 
2.47.0