[PATCH v2 1/4] parport: use standard kernel printing functions

[412574090@163.com]

From: weiyufeng <weiyufeng@kylinos.cn>

change printk to standard kernel printing functions.

Signed-off-by: weiyufeng <weiyufeng@kylinos.cn>
---
 drivers/net/hamradio/baycom_epp.c |  8 ++++----
 drivers/net/hamradio/baycom_par.c |  6 +++---
 drivers/parport/parport_pc.c      | 12 ++++++------
 drivers/parport/procfs.c          |  2 +-
 4 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 9e366f275406..1b7fd6d49a96 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -828,13 +828,13 @@ static int epp_open(struct net_device *dev)
         }
 #if 0
         if (pp->irq < 0) {
-                printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
+		pr_err("%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
 		parport_put_port(pp);
                 return -ENXIO;
         }
 #endif
 	if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
-                printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n",
+		pr_err("%s: parport at 0x%lx cannot be used\n",
 		       bc_drvname, pp->base);
 		parport_put_port(pp);
                 return -EIO;
@@ -857,11 +857,11 @@ static int epp_open(struct net_device *dev)
 	bc->pdev = parport_register_dev_model(pp, dev->name, &par_cb, i);
 	parport_put_port(pp);
         if (!bc->pdev) {
-                printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
+		pr_err("%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
                 return -ENXIO;
         }
         if (parport_claim(bc->pdev)) {
-                printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
+		pr_err("%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
                 parport_unregister_device(bc->pdev);
                 return -EBUSY;
         }
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 00ebc25d0b22..4b57874c2463 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -307,12 +307,12 @@ static int par96_open(struct net_device *dev)
 		return -ENXIO;
 	}
 	if (pp->irq < 0) {
-		printk(KERN_ERR "baycom_par: parport at 0x%lx has no irq\n", pp->base);
+		pr_err("baycom_par: parport at 0x%lx has no irq\n", pp->base);
 		parport_put_port(pp);
 		return -ENXIO;
 	}
 	if ((~pp->modes) & (PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
-		printk(KERN_ERR "baycom_par: parport at 0x%lx cannot be used\n", pp->base);
+		pr_err("baycom_par: parport at 0x%lx cannot be used\n", pp->base);
 		parport_put_port(pp);
 		return -ENXIO;
 	}
@@ -339,7 +339,7 @@ static int par96_open(struct net_device *dev)
 		return -ENXIO;
 	}
 	if (parport_claim(bc->pdev)) {
-		printk(KERN_ERR "baycom_par: parport at 0x%lx busy\n", pp->base);
+		pr_err("baycom_par: parport at 0x%lx busy\n", pp->base);
 		parport_unregister_device(bc->pdev);
 		return -EBUSY;
 	}
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index f33b5d1ddfc1..609c10d4bc31 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1609,7 +1609,7 @@ static int parport_ECP_supported(struct parport *pb)
 
 	priv->fifo_depth = i;
 	if (verbose_probing)
-		printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
+		pr_debug("0x%lx: FIFO is %d bytes\n", pb->base, i);
 
 	/* Find out writeIntrThreshold */
 	frob_econtrol(pb, 1<<2, 1<<2);
@@ -1623,7 +1623,7 @@ static int parport_ECP_supported(struct parport *pb)
 
 	if (i <= priv->fifo_depth) {
 		if (verbose_probing)
-			printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
+			pr_debug("0x%lx: writeIntrThreshold is %d\n",
 			       pb->base, i);
 	} else
 		/* Number of bytes we know we can write if we get an
@@ -1676,16 +1676,16 @@ static int parport_ECP_supported(struct parport *pb)
 	priv->pword = pword;
 
 	if (verbose_probing) {
-		printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
+		pr_debug("0x%lx: PWord is %d bits\n",
 		       pb->base, 8 * pword);
 
-		printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n",
+		pr_debug("0x%lx: Interrupts are ISA-%s\n",
 		       pb->base, config & 0x80 ? "Level" : "Pulses");
 
 		configb = inb(CONFIGB(pb));
-		printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
+		pr_debug("0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
 		       pb->base, config, configb);
-		printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
+		pr_debug("0x%lx: ECP settings irq=", pb->base);
 		if ((configb >> 3) & 0x07)
 			pr_cont("%d", intrline[(configb >> 3) & 0x07]);
 		else
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index 3880460e67f2..3f809fff317b 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -128,7 +128,7 @@ static int do_hardware_base_addr(const struct ctl_table *table, int write,
 	if (write) /* permissions prevent this anyway */
 		return -EACCES;
 
-	len += scnprintf (buffer, sizeof(buffer), "%lu\t%lu\n", port->base, port->base_hi);
+	len += scnprintf(buffer, sizeof(buffer), "%lu\t%lu\n", port->base, port->base_hi);
 
 	if (len > *lenp)
 		len = *lenp;
-- 
2.25.1