From: "Rob Herring (Arm)" <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: nvidia: Remove unused and undocumented "regulator-ramp-delay-scale" property
Date: Fri, 15 Nov 2024 13:34:44 -0600 [thread overview]
Message-ID: <20241115193445.3619074-1-robh@kernel.org> (raw)
Remove "regulator-ramp-delay-scale" property which is both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index c56824d7f4d8..0ecdd7243b2e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -266,7 +266,6 @@ vdd_soc: sd0 {
regulator-max-microvolt = <1170000>;
regulator-enable-ramp-delay = <146>;
regulator-ramp-delay = <27500>;
- regulator-ramp-delay-scale = <300>;
regulator-always-on;
regulator-boot-on;
@@ -281,7 +280,6 @@ vdd_ddr: sd1 {
regulator-max-microvolt = <1150000>;
regulator-enable-ramp-delay = <176>;
regulator-ramp-delay = <27500>;
- regulator-ramp-delay-scale = <300>;
regulator-always-on;
regulator-boot-on;
@@ -296,7 +294,6 @@ vdd_pre: sd2 {
regulator-max-microvolt = <1350000>;
regulator-enable-ramp-delay = <176>;
regulator-ramp-delay = <27500>;
- regulator-ramp-delay-scale = <350>;
regulator-always-on;
regulator-boot-on;
@@ -311,7 +308,6 @@ vdd_1v8: sd3 {
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <242>;
regulator-ramp-delay = <27500>;
- regulator-ramp-delay-scale = <360>;
regulator-always-on;
regulator-boot-on;
@@ -326,7 +322,6 @@ vdd_sys_1v2: ldo0 {
regulator-max-microvolt = <1200000>;
regulator-enable-ramp-delay = <26>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
regulator-always-on;
regulator-boot-on;
@@ -341,7 +336,6 @@ vdd_pex_1v05: ldo1 {
regulator-max-microvolt = <1050000>;
regulator-enable-ramp-delay = <22>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
maxim,active-fps-power-up-slot = <0>;
@@ -354,7 +348,6 @@ vddio_sdmmc: ldo2 {
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <62>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
maxim,active-fps-power-up-slot = <0>;
@@ -371,7 +364,6 @@ vdd_rtc: ldo4 {
regulator-max-microvolt = <1100000>;
regulator-enable-ramp-delay = <22>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
regulator-disable-active-discharge;
regulator-always-on;
regulator-boot-on;
@@ -395,7 +387,6 @@ avdd_1v05_pll: ldo7 {
regulator-max-microvolt = <1050000>;
regulator-enable-ramp-delay = <24>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
maxim,active-fps-power-up-slot = <3>;
@@ -408,7 +399,6 @@ avdd_1v05: ldo8 {
regulator-max-microvolt = <1050000>;
regulator-enable-ramp-delay = <22>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
maxim,active-fps-power-up-slot = <6>;
--
2.45.2
next reply other threads:[~2024-11-15 19:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-15 19:34 Rob Herring (Arm) [this message]
2025-01-09 22:54 ` Rob Herring
2025-02-13 20:29 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241115193445.3619074-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®