mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, dave.hansen@linux.intel.com, tglx@linutronix.de,
	mingo@kernel.org, rudi.horn@oracle.com, joe.jin@oracle.com,
	aruna.ramakrishna@oracle.com
Subject: [PATCH v3 2/2] x86/pkeys: Set XSTATE_BV[PKRU] to 1 so that PKRU is XRSTOR'd correctly
Date: Tue, 19 Nov 2024 17:45:20 +0000	[thread overview]
Message-ID: <20241119174520.3987538-3-aruna.ramakrishna@oracle.com> (raw)
In-Reply-To: <20241119174520.3987538-1-aruna.ramakrishna@oracle.com>

PKRU value is not XRSTOR'd from the XSAVE area if the corresponding
XSTATE_BV[i] bit is 0. A wrpkru(0) sets XSTATE_BV[PKRU] to 0 on AMD
systems, which means the PKRU value updated on the sigframe later on,
in update_pkru_in_sigframe(), is ignored.

To make this behavior consistent across Intel and AMD systems, and to
ensure that the PKRU value updated on the sigframe is always restored
correctly, explicitly set XSTATE_BV[PKRU] to 1.

Fixes: 70044df250d0 ("x86/pkeys: Update PKRU to enable all pkeys before XSAVE")

Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Suggested-by: Rudi Horn <rudi.horn@oracle.com>
---
 arch/x86/kernel/fpu/xstate.h | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/fpu/xstate.h b/arch/x86/kernel/fpu/xstate.h
index 6b2924fbe5b8..aa16f1a1bbcf 100644
--- a/arch/x86/kernel/fpu/xstate.h
+++ b/arch/x86/kernel/fpu/xstate.h
@@ -72,10 +72,22 @@ static inline u64 xfeatures_mask_independent(void)
 /*
  * Update the value of PKRU register that was already pushed onto the signal frame.
  */
-static inline int update_pkru_in_sigframe(struct xregs_state __user *buf, u32 pkru)
+static inline int update_pkru_in_sigframe(struct xregs_state __user *buf, u64 mask, u32 pkru)
 {
+	u64 xstate_bv;
+	int err;
+
 	if (unlikely(!cpu_feature_enabled(X86_FEATURE_OSPKE)))
 		return 0;
+
+	/* Mark PKRU as in-use so that it is restored correctly. */
+	xstate_bv = (mask & xfeatures_in_use()) | XFEATURE_MASK_PKRU;
+
+	err =  __put_user(xstate_bv, &buf->header.xfeatures);
+	if (err)
+		return err;
+
+	/* Update PKRU value in the userspace xsave buffer. */
 	return __put_user(pkru, (unsigned int __user *)get_xsave_addr_user(buf, XFEATURE_PKRU));
 }
 
@@ -292,7 +304,7 @@ static inline int xsave_to_user_sigframe(struct xregs_state __user *buf, u32 pkr
 	clac();
 
 	if (!err)
-		err = update_pkru_in_sigframe(buf, pkru);
+		err = update_pkru_in_sigframe(buf, mask, pkru);
 
 	return err;
 }
-- 
2.43.5


  parent reply	other threads:[~2024-11-19 17:45 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-19 17:45 [PATCH v3 0/2] x86/pkeys: Set XSTATE_BV[PKRU] when updating Aruna Ramakrishna
2024-11-19 17:45 ` [PATCH v3 1/2] x86/pkeys: Change caller of update_pkru_in_sigframe() Aruna Ramakrishna
2024-11-19 17:45 ` Aruna Ramakrishna [this message]
2024-11-23  0:10   ` [PATCH v3 2/2] x86/pkeys: Set XSTATE_BV[PKRU] to 1 so that PKRU is XRSTOR'd correctly Dave Hansen
2024-12-02 18:33     ` Aruna Ramakrishna
2024-12-02 18:35       ` Dave Hansen
2024-11-21 18:01 ` [PATCH v3 0/2] x86/pkeys: Set XSTATE_BV[PKRU] when updating Aruna Ramakrishna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241119174520.3987538-3-aruna.ramakrishna@oracle.com \
    --to=aruna.ramakrishna@oracle.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=joe.jin@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=rudi.horn@oracle.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®