mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Hilda Wu <hildawu@realtek.com>,
	Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
	Sasha Levin <sashal@kernel.org>,
	marcel@holtmann.org, luiz.dentz@gmail.com,
	linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 43/48] Bluetooth: btusb: Add RTL8852BE device 0489:e123 to device tables
Date: Sun, 24 Nov 2024 08:49:06 -0500	[thread overview]
Message-ID: <20241124134950.3348099-43-sashal@kernel.org> (raw)
In-Reply-To: <20241124134950.3348099-1-sashal@kernel.org>

From: Hilda Wu <hildawu@realtek.com>

[ Upstream commit 69b84ffce260ff13826dc10aeb3c3e5c2288a552 ]

Add the support ID 0489:e123 to usb_device_id table for
Realtek RTL8852B chip.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e123 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0b915f2c76078..4c9747de0d6de 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -549,6 +549,8 @@ static const struct usb_device_id blacklist_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3591), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe123), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 
-- 
2.43.0


  parent reply	other threads:[~2024-11-24 13:51 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-24 13:48 [PATCH AUTOSEL 6.1 01/48] drm/vc4: hdmi: Avoid log spam for audio start failure Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 02/48] drm/vc4: hvs: Set AXI panic modes for the HVS Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 03/48] drm: panel-orientation-quirks: Add quirk for AYA NEO 2 model Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 04/48] drm: panel-orientation-quirks: Add quirk for AYA NEO Founder edition Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 05/48] drm: panel-orientation-quirks: Add quirk for AYA NEO GEEK Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 06/48] drm/bridge: it6505: Enable module autoloading Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 07/48] drm/mcde: " Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 08/48] drm/radeon/r600_cs: Fix possible int overflow in r600_packet3_check() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 09/48] drm/display: Fix building with GCC 15 Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 10/48] r8169: don't apply UDP padding quirk on RTL8126A Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 11/48] samples/bpf: Fix a resource leak Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 12/48] net: fec_mpc52xx_phy: Use %pa to format resource_size_t Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 13/48] net: ethernet: fs_enet: " Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 14/48] net/sched: cbs: Fix integer overflow in cbs_set_port_rate() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 15/48] af_packet: avoid erroring out after sock_init_data() in packet_create() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 16/48] Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 17/48] Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 18/48] net: af_can: do not leave a dangling sk pointer in can_create() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 19/48] net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 20/48] net: inet: do not leave a dangling sk pointer in inet_create() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 21/48] net: inet6: do not leave a dangling sk pointer in inet6_create() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 22/48] wifi: ath5k: add PCI ID for SX76X Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 23/48] wifi: ath5k: add PCI ID for Arcadyan devices Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 24/48] drm/panel: simple: Add Microchip AC69T88A LVDS Display panel Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 25/48] net: sfp: change quirks for Alcatel Lucent G-010S-P Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 26/48] drm/sched: memset() 'job' in drm_sched_job_init() Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 27/48] drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts for vega20_ih Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 28/48] drm/amdgpu: Dereference the ATCS ACPI buffer Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 29/48] drm/amdgpu: refine error handling in amdgpu_ttm_tt_pin_userptr Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 30/48] dma-debug: fix a possible deadlock on radix_lock Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 31/48] jfs: array-index-out-of-bounds fix in dtReadFirst Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 32/48] jfs: fix shift-out-of-bounds in dbSplit Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 33/48] jfs: fix array-index-out-of-bounds in jfs_readdir Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 34/48] jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree Sasha Levin
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 35/48] net: enetc: remove ERR050089 workaround for i.MX95 Sasha Levin
2024-11-25  1:55   ` Wei Fang
2024-11-24 13:48 ` [PATCH AUTOSEL 6.1 36/48] net: enetc: add i.MX95 EMDIO support Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 37/48] drm/amdgpu: skip amdgpu_device_cache_pci_state under sriov Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 38/48] ALSA: usb-audio: Make mic volume workarounds globally applicable Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 39/48] drm/amdgpu: set the right AMDGPU sg segment limitation Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 40/48] wifi: ipw2x00: libipw_rx_any(): fix bad alignment Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 41/48] wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 42/48] dsa: qca8k: Use nested lock to avoid splat Sasha Levin
2024-11-24 13:49 ` Sasha Levin [this message]
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 44/48] Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 45/48] ASoC: hdmi-codec: reorder channel allocation list Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 46/48] rocker: fix link status detection in rocker_carrier_init() Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 47/48] net/neighbor: clear error in case strict check is not set Sasha Levin
2024-11-24 13:49 ` [PATCH AUTOSEL 6.1 48/48] netpoll: Use rcu_access_pointer() in __netpoll_setup Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241124134950.3348099-43-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=hildawu@realtek.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=luiz.von.dentz@intel.com \
    --cc=marcel@holtmann.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®