mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yongxing Mou <quic_yongmou@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	Ritesh Kumar <quic_riteshk@quicinc.com>,
	Yongxing Mou <quic_yongmou@quicinc.com>
Subject: [PATCH 1/2] arm64: dts: qcom: qcs8300: add DisplayPort device nodes
Date: Wed, 27 Nov 2024 18:45:13 +0800	[thread overview]
Message-ID: <20241127-dp_dts_qcs8300-v1-1-e3d13dec4233@quicinc.com> (raw)
In-Reply-To: <20241127-dp_dts_qcs8300-v1-0-e3d13dec4233@quicinc.com>

Add device tree nodes for the DPTX0 controller with their
corresponding PHYs found on Qualcomm QCS8300 SoC.

Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 115 +++++++++++++++++++++++++++++++++-
 1 file changed, 114 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 1642e2863affd5af0b4f68118a47b7a74b76df95..28deba0a389641b4dddbf4505d6f44c6607aa03b 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -987,6 +987,19 @@ mdss_mdp: display-controller@ae01000 {
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
 
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
 				mdp_opp_table: opp-table {
 					compatible = "operating-points-v2";
 
@@ -1011,6 +1024,104 @@ opp-650000000 {
 					};
 				};
 			};
+
+			mdss_dp0_phy: phy@aec2a00 {
+				compatible = "qcom,qcs8300-edp-phy";
+
+				reg = <0x0 0x0aec2a00 0x0 0x200>,
+				      <0x0 0x0aec2200 0x0 0xd0>,
+				      <0x0 0x0aec2600 0x0 0xd0>,
+				      <0x0 0x0aec2000 0x0 0x1c8>;
+
+				clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@af54000 {
+				compatible = "qcom,qcs8300-dp";
+
+				reg = <0x0 0x0af54000 0x0 0x104>,
+				      <0x0 0x0af54200 0x0 0x0c0>,
+				      <0x0 0x0af55000 0x0 0x770>,
+				      <0x0 0x0af56000 0x0 0x09c>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+				assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dp0_phy 0>,
+							 <&mdss_dp0_phy 1>;
+				phys = <&mdss_dp0_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
 		};
 
 		dispcc: clock-controller@af00000 {
@@ -1020,7 +1131,9 @@ dispcc: clock-controller@af00000 {
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&sleep_clk>,
-				 <0>, <0>, <0>, <0>,
+				 <&mdss_dp0_phy 0>,
+				 <&mdss_dp0_phy 1>,
+				 <0>, <0>,
 				 <0>, <0>, <0>, <0>;
 			power-domains = <&rpmhpd RPMHPD_MMCX>;
 			#clock-cells = <1>;

-- 
2.34.1


  reply	other threads:[~2024-11-27 10:47 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-27 10:45 [PATCH 0/2] Enable Display Port for Qualcomm QCS8300-ride platform Yongxing Mou
2024-11-27 10:45 ` Yongxing Mou [this message]
2024-12-05 21:36   ` [PATCH 1/2] arm64: dts: qcom: qcs8300: add DisplayPort device nodes Konrad Dybcio
2024-12-26  7:03     ` Yongxing Mou
2024-12-26 19:57       ` Dmitry Baryshkov
2025-01-09  9:41         ` Yongxing Mou
2024-12-30 13:27       ` Konrad Dybcio
2025-01-09  9:43         ` Yongxing Mou
2025-01-08 23:06   ` Bjorn Andersson
2025-01-09  9:47     ` Yongxing Mou
2024-11-27 10:45 ` [PATCH 2/2] arm64: dts: qcom: qcs8300-ride: Enable Display Port Yongxing Mou
2024-12-05 21:46   ` Konrad Dybcio
2024-12-26  7:06     ` Yongxing Mou
2024-12-30 13:27       ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241127-dp_dts_qcs8300-v1-1-e3d13dec4233@quicinc.com \
    --to=quic_yongmou@quicinc.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_riteshk@quicinc.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®