[PATCH v4 2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300

[Jingyi Wang <quic_jingyw@quicinc.com>]

Enable clock controller, interconnect and pinctrl for Qualcomm
QCS8300 platform to boot QCS8300 RIDE board to UART console.

The serial engine depends on gcc, interconnect and pinctrl. Since
the serial console driver is only available as built-in, so these
configs needs be built-in for the UART device to probe and register
the console.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d13218d0c30f..3d9e48940c96 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QCS8300=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
@@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
+CONFIG_QCS_GCC_8300=y
 CONFIG_SC_CAMCC_7280=m
 CONFIG_QDU_GCC_1000=y
 CONFIG_SC_CAMCC_8280XP=m
@@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCM2290=y
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_QCS8300=y
 CONFIG_INTERCONNECT_QCOM_QDU1000=y
 CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y

-- 
2.25.1