[PATCH 2/5] regulator: pca9450: Use dev_err_probe() to simplify code

[Frank Li <Frank.Li@nxp.com>]

Use dev_err_probe() to simplify code.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/regulator/pca9450-regulator.c | 73 +++++++++++++----------------------
 1 file changed, 27 insertions(+), 46 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index caeeed433165c..0b1f099fdd5ee 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -932,25 +932,20 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 
 	pca9450->regmap = devm_regmap_init_i2c(i2c,
 					       &pca9450_regmap_config);
-	if (IS_ERR(pca9450->regmap)) {
-		dev_err(&i2c->dev, "regmap initialization failed\n");
-		return PTR_ERR(pca9450->regmap);
-	}
+	if (IS_ERR(pca9450->regmap))
+		return dev_err_probe(&i2c->dev, PTR_ERR(pca9450->regmap),
+				     "regmap initialization failed\n");
 
 	ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id);
-	if (ret) {
-		dev_err(&i2c->dev, "Read device id error\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&i2c->dev, ret, "Read device id error\n");
 
 	/* Check your board and dts for match the right pmic */
 	if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) ||
 	    ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC) ||
-	    ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A)) {
-		dev_err(&i2c->dev, "Device id(%x) mismatched\n",
-			device_id >> 4);
-		return -EINVAL;
-	}
+	    ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A))
+		return dev_err_probe(&i2c->dev, -EINVAL,
+				     "Device id(%x) mismatched\n", device_id >> 4);
 
 	for (i = 0; i < pca9450->rcnt; i++) {
 		const struct regulator_desc *desc;
@@ -964,13 +959,9 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 		config.dev = pca9450->dev;
 
 		rdev = devm_regulator_register(pca9450->dev, desc, &config);
-		if (IS_ERR(rdev)) {
-			ret = PTR_ERR(rdev);
-			dev_err(pca9450->dev,
-				"Failed to register regulator(%s): %d\n",
-				desc->name, ret);
-			return ret;
-		}
+		if (IS_ERR(rdev))
+			return dev_err_probe(pca9450->dev, PTR_ERR(rdev),
+					     "Failed to register regulator(%s)\n", desc->name);
 	}
 
 	if (pca9450->irq) {
@@ -978,29 +969,24 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 						pca9450_irq_handler,
 						(IRQF_TRIGGER_FALLING | IRQF_ONESHOT),
 						"pca9450-irq", pca9450);
-		if (ret != 0) {
-			dev_err(pca9450->dev, "Failed to request IRQ: %d\n",
-				pca9450->irq);
-			return ret;
-		}
+		if (ret != 0)
+			return dev_err_probe(pca9450->dev, ret, "Failed to request IRQ: %d\n",
+					     pca9450->irq);
+
 		/* Unmask all interrupt except PWRON/WDOG/RSVD */
 		ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK,
 					IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS |
 					IRQ_THERM_105 | IRQ_THERM_125,
 					IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD);
-		if (ret) {
-			dev_err(&i2c->dev, "Unmask irq error\n");
-			return ret;
-		}
+		if (ret)
+			return dev_err_probe(&i2c->dev, ret, "Unmask irq error\n");
 	}
 
 	/* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */
 	ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS,
 				BUCK123_PRESET_EN);
-	if (ret) {
-		dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&i2c->dev, ret,  "Failed to clear PRESET_EN bit\n");
 
 	if (of_property_read_bool(i2c->dev.of_node, "nxp,wdog_b-warm-reset"))
 		reset_ctrl = WDOG_B_CFG_WARM;
@@ -1010,20 +996,16 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 	/* Set reset behavior on assertion of WDOG_B signal */
 	ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
 				 WDOG_B_CFG_MASK, reset_ctrl);
-	if (ret) {
-		dev_err(&i2c->dev, "Failed to set WDOG_B reset behavior\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&i2c->dev, ret, "Failed to set WDOG_B reset behavior\n");
 
 	if (of_property_read_bool(i2c->dev.of_node, "nxp,i2c-lt-enable")) {
 		/* Enable I2C Level Translator */
 		ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_CONFIG2,
 					 I2C_LT_MASK, I2C_LT_ON_STANDBY_RUN);
-		if (ret) {
-			dev_err(&i2c->dev,
-				"Failed to enable I2C level translator\n");
-			return ret;
-		}
+		if (ret)
+			return dev_err_probe(&i2c->dev, ret,
+					     "Failed to enable I2C level translator\n");
 	}
 
 	/*
@@ -1033,10 +1015,9 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 	 */
 	pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH);
 
-	if (IS_ERR(pca9450->sd_vsel_gpio)) {
-		dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");
-		return PTR_ERR(pca9450->sd_vsel_gpio);
-	}
+	if (IS_ERR(pca9450->sd_vsel_gpio))
+		return dev_err_probe(&i2c->dev, PTR_ERR(pca9450->sd_vsel_gpio),
+				     "Failed to get SD_VSEL GPIO\n");
 
 	dev_info(&i2c->dev, "%s probed.\n",
 		type == PCA9450_TYPE_PCA9450A ? "pca9450a" :

-- 
2.34.1